Introduction
This manual provides essential information for the safe and efficient use of your Jamo S 810 SUB Active Subwoofer. Please read this manual thoroughly before operating the device and retain it for future reference.
Product Overview
The Jamo S 810 SUB is an active subwoofer designed to enhance the low-frequency performance of your audio system. It is part of the new Jamo Studio 8 series, engineered for both hi-fi and home theater applications, delivering powerful bass with a 10-inch woofer and a 150W Class D amplifier.
What's in the Box
- Jamo S 810 SUB Active Subwoofer
- Power Cable
Safety Information
Always observe the following safety precautions to prevent electric shock, fire, or damage to the unit:
- Do not expose the unit to rain or moisture.
- Do not block any ventilation openings.
- Do not place the unit near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel.
Setup
Placement
For optimal bass performance, consider placing the subwoofer in a corner of the room or along a wall. Experiment with different positions to find the best sound for your listening environment. Ensure there is adequate ventilation around the unit.
This image displays the Jamo S 810 SUB Active Subwoofer. The subwoofer is white with a grey fabric grille covering the front, visible from a slight angle. The Jamo logo is subtly placed on the bottom right of the white side panel.
Connections
The Jamo S 810 SUB connects to your audio system via RCA inputs. Ensure your amplifier, receiver, or other compatible devices (such as DVD players, Blu-Ray players, iPhones, iPads, Samsung devices, Atmos, Dolby, or THX systems) have an available subwoofer output (LFE or Sub Out).
- Connect one end of an RCA cable to the LFE or Sub Out port on your amplifier/receiver.
- Connect the other end of the RCA cable to the RCA input on the Jamo S 810 SUB.
Power Connection
Once all audio connections are made, connect the supplied power cable to the AC power input on the subwoofer and then to a suitable wall outlet. The subwoofer is designed to operate on AC power.
Operating
Power On/Off
The subwoofer typically has a power switch or an auto-on/standby feature. Refer to the back panel of your unit for specific power controls. In auto-on mode, the subwoofer will power on automatically when an audio signal is detected and enter standby when no signal is present for a period.
Volume and Crossover Settings
Adjust the volume level of the subwoofer to blend seamlessly with your main speakers. The subwoofer may also feature a crossover control, which allows you to set the upper frequency limit at which the subwoofer operates. This ensures a smooth transition between the subwoofer and your main speakers.
Control Method
The Jamo S 810 SUB can be controlled via an application, allowing for convenient adjustments to settings from your smart device. Consult the manufacturer's website or product documentation for details on the specific application and its features.
Maintenance
To ensure the longevity and optimal performance of your Jamo S 810 SUB, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior surfaces of the subwoofer. Do not use liquid cleaners, aerosols, or abrasive chemicals, as these may damage the finish.
- Ventilation: Ensure that the ventilation openings are not blocked by dust or debris. Periodically check and clean them if necessary.
- Placement: Avoid placing the subwoofer in direct sunlight or near sources of extreme heat or cold. Keep it away from areas with high humidity.
Troubleshooting
If you encounter issues with your Jamo S 810 SUB, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from subwoofer |
|
|
| Distorted or unclear bass |
|
|
| Subwoofer hums or buzzes |
|
|
If the problem persists after trying these solutions, please contact customer support.
Specifications
| Feature | Specification |
|---|---|
| Brand | JAMO |
| Model Name | S 810 SUB |
| Model Number | 1064610 |
| Dimensions (L x W x H) | 41 x 23 x 51 cm (16.1 x 9.1 x 20.1 inches) |
| Weight | 7 kg (15.4 lbs) |
| Color | White |
| Material | Wood |
| Speaker Type | Woofer |
| Subwoofer Diameter | 10 Inches |
| Max Speaker Output Power | 150 Watts |
| Power Source | AC |
| Connectivity Technology | RCA |
| Audio Output Mode | Surround Sound |
| Mounting Type | Table Mount |
| Compatible Devices | Amplifier, DVD, Blu-Ray, iPhone, iPad, Samsung, Atmos, Dolby, THX |
| Surround Sound Channel Configuration | 5.1/Dolby Digital |
| Included Components | Power Cable |
| Control Method | Application |
| Special Features | Powerful Bass |
| Recommended Uses | Studio |
Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Jamo website. Software updates are guaranteed until information is not available, indicating that specific end-of-life support dates for software are not publicly provided.
For technical assistance or service inquiries, please contact Jamo customer service through their official channels.
