Introduction
This user manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your TOTAL Cordless Electric Mini Hedge Trimmer, model TSTLI2001. Please read this manual thoroughly before first use and keep it for future reference.
Important Safety Instructions
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.
- Read all instructions carefully before operating the tool.
- Wear appropriate personal protective equipment, including safety glasses, gloves, and sturdy footwear.
- Keep hands and feet away from the cutting blades.
- Ensure the work area is clear of obstacles and bystanders.
- Do not operate the tool in wet conditions or near flammable liquids or gases.
- Store the tool in a dry, secure place out of reach of children.
- Disconnect the battery pack before performing any maintenance or cleaning.
Product Overview
The TOTAL Cordless Electric Mini Hedge Trimmer is designed for light pruning and shaping of hedges and shrubs. It features a compact design and a powerful 20V motor for efficient operation.

Figure 1: Main view of the TOTAL Cordless Electric Mini Hedge Trimmer. This image shows the teal and grey tool with its long hedge trimmer blade attached, and a 20V battery inserted into the handle.
Components:
- Main Unit (Motor Housing and Handle)
- Hedge Trimmer Blade (200mm length)
- Scissor Attachment (100mm width)
- Safety Guard
- Power Button / Trigger
- Battery Compartment (Battery and charger sold separately)

Figure 2: The mini hedge trimmer shown with both the hedge trimmer blade attached and the separate scissor attachment. The scissor attachment is black with two serrated blades.
Setup
- Unpacking: Carefully remove all components from the packaging. Inspect for any damage.
- Battery Installation:
- Ensure the battery (P20S series, sold separately) is fully charged before first use.
- Align the battery pack with the battery compartment at the rear of the handle.
- Slide the battery into place until it clicks securely.

Figure 3: Close-up view of the handle and battery slot area of the hedge trimmer, showing where the 20V battery is inserted.
- Blade Attachment:
- Ensure the battery is removed before attaching or changing blades.
- To attach the hedge trimmer blade (200mm), align the blade with the drive shaft and slide it into position until it locks.
- To attach the scissor attachment (100mm), follow similar alignment and locking procedures.
- Always ensure the blade is securely fastened before operation.
Operating Instructions
- Pre-Operation Check:
- Verify the battery is fully charged and securely installed.
- Check that the blade is clean, sharp, and properly attached.
- Inspect the work area for any debris or hidden objects that could interfere with cutting.
- Starting the Tool:
- Grip the handle firmly with both hands.
- Press the safety lock button (if present) and then squeeze the trigger to start the motor.

Figure 4: Close-up view of the red power button and trigger mechanism on the handle of the hedge trimmer.
- Cutting Technique:
- Maintain a steady and controlled movement.
- For hedges, use a sweeping motion, cutting small amounts at a time.
- The tool operates at a no-load speed of up to 1200 RPM.
- The hedge trimmer blade has a cutting length of 200mm.
- The scissor attachment provides a cutting width of 100mm for grass and smaller plants.

Figure 5: Detailed close-up of the stainless steel blade teeth of the hedge trimmer, showing their sharp, interlocking design.
- Stopping the Tool: Release the trigger to stop the motor.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your hedge trimmer.
- Cleaning: After each use, remove the battery and clean the blades and housing with a dry cloth. Remove any sap or debris from the blades.
- Blade Care: Periodically lubricate the blades with a light machine oil to prevent rust and ensure smooth operation. Sharpen blades as needed by a qualified professional.
- Storage: Store the tool in a clean, dry place, away from direct sunlight and extreme temperatures. Ensure the blade guard is in place when storing.
- Battery Care: Store batteries in a cool, dry place. Do not store fully discharged batteries for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not start. | Battery not charged or not properly inserted. | Charge battery fully. Ensure battery is clicked into place. |
| Blades are not cutting effectively. | Blades are dull or dirty. | Clean blades. Sharpen or replace blades if necessary. |
| Excessive vibration during operation. | Blade not properly secured or damaged. | Check blade attachment. Inspect blade for damage and replace if needed. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | TSTLI2001 |
| Power Source | Battery Powered (20V) |
| No-Load Speed | 1200 RPM |
| Hedge Trimmer Blade Length | 200 mm |
| Scissor Attachment Cutting Width | 100 mm |
| Distance Between Teeth | 8 mm |
| Weight | 1.17 kg |
| Material | Stainless Steel (Blade), Other (Housing) |
| Dimensions (L x W x H) | 36.5 x 11.5 x 15 cm |
Warranty and Support
Specific warranty information for the TOTAL Cordless Electric Mini Hedge Trimmer (Model TSTLI2001) is not provided in this manual. Please refer to the product packaging or contact TOTAL customer service for details regarding warranty coverage and support options.
For technical assistance or spare parts, please visit the official TOTAL Tools website or contact your local distributor.





