Zinus Wood Metal Coffee Table Instruction Manual

1. Introduction

Thank you for choosing the Zinus Wood Metal Coffee Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new coffee table. Please read these instructions carefully before beginning assembly and retain them for future reference.

Figure 1: The Zinus Wood Metal Coffee Table, featuring a brown pine wood top and black metal legs, positioned in a modern living room with a gray sofa and green wall.

2. Safety Information

• Read all instructions before assembly and use.
• Keep all hardware and small parts out of reach of children.
• Assemble the table on a soft, clean surface to prevent scratches.
• Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as needed.
• Do not exceed the maximum weight recommendation of 100 pounds.
• Avoid standing or sitting on the coffee table.

3. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Tabletop (Pine Wood)
• Lower Shelf (Wood)
• Metal Legs (4 pieces)
• Assembly Hardware (bolts, washers, nuts)
• Installation Tool (Allen wrench/ratchet)
• Assembly Guide

4. Setup (Assembly Instructions)

Assembly typically takes approximately 30 minutes with the included tools.

1. Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to prevent damage.
2. Attach Legs to Tabletop: Align the metal legs with the pre-drilled holes on the underside of the pine wood tabletop. Secure each leg using the provided bolts and washers. Do not fully tighten yet.
3. Install Lower Shelf: Position the lower wood shelf between the metal legs. Align the holes on the shelf with the corresponding holes on the legs. Secure the shelf using the remaining bolts and washers.
4. Tighten All Hardware: Once all components are in place, systematically tighten all bolts and screws using the provided installation tool. Ensure all connections are firm and stable.
5. Final Check: Gently lift and move the table to its desired location. Verify that it is stable and level.

Figure 2: A close-up view illustrating the secure attachment point where a black metal leg connects to the brown pine wood tabletop with visible bolts.

5. Operating (Usage)

The Zinus Wood Metal Coffee Table is designed for indoor use as a functional and decorative surface in living spaces. It can be used to hold beverages, books, remote controls, or decorative items. The lower shelf provides additional storage or display space.

• Place items evenly across the tabletop to distribute weight.
• Use coasters under drinks to protect the wood surface from moisture.
• Avoid placing hot items directly on the wood surface without protection.

6. Maintenance

Proper care will help maintain the appearance and longevity of your coffee table.

• Cleaning: Wipe the wood and metal surfaces with a damp cloth. Avoid using harsh chemicals, abrasive cleaners, or furniture polish that may damage the finish.
• Spills: Clean spills immediately to prevent staining or water damage to the wood.
• Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration of the wood.
• Humidity: Maintain a consistent humidity level in the room to prevent wood from warping or cracking.
• Hardware: Periodically check all bolts and screws and re-tighten them as necessary to ensure stability.

Figure 3: A detailed close-up of the Zinus coffee table's pine wood surface, showing the natural grain and plank-like construction.

7. Troubleshooting

If you encounter any issues with your coffee table, refer to the following common solutions:

• Wobbling Table: Ensure all bolts are securely tightened. Check if the table is on an even surface. Adjust leg levelers if present (not specified for this model, but a general tip).
• Loose Parts: Re-tighten any loose hardware. If a part is stripped or damaged, contact customer support for replacement.
• Scratches/Dents: For minor surface imperfections, wood repair kits or markers can be used. For significant damage, contact customer support.

8. Specifications

Figure 4: The Zinus Wood Metal Coffee Table displaying its key dimensions: 47 inches in width, 23.5 inches in depth, and 18 inches in height.

9. Warranty Information

This Zinus Wood Metal Coffee Table is covered by a 1-year worry-free limited warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship. It does not cover damage resulting from improper assembly, misuse, abuse, accidents, or normal wear and tear. Please retain your proof of purchase for warranty claims.

10. Support

For further assistance, missing parts, or warranty inquiries, please contact Zinus customer support. Refer to the contact information provided with your product packaging or visit the official Zinus website.

Please note: Specific contact details may vary. Always refer to the most current information provided by the manufacturer.