UPBRIGHT 01D430

UpBright 15V AC Adapter Instruction Manual

Model: Harman / Kardon DP/N 01D430 15VAC Power

Introduction

This manual provides essential instructions for the safe and effective use of your UpBright 15V AC Adapter. This adapter is designed to provide reliable power to compatible Harman Kardon Multimedia PC Speakers and JBL Duet systems. Please read this manual thoroughly before use and retain it for future reference.

Setup Instructions

  1. Verify Compatibility: Ensure your device requires a 15V AC input with a 1.1A (1100mA) current rating and features a compatible barrel connector. This adapter is specifically designed for Harman Kardon Multimedia PC Speakers (models like HK195, HK195-01T, 02320V, A481511OT, HK-01T, Harmon F158, DELL 06941V) and JBL Duet Speakers (Model No.: A481511OT, A4815110T, 700-0034-001, A4181511OT).
  2. Connect to Device: Insert the barrel connector of the AC adapter firmly into the power input port of your Harman Kardon or JBL device.
  3. Connect to Power Outlet: Plug the AC adapter's two-prong power plug into a standard 110V-120VAC 60Hz wall outlet. For international use, ensure the local voltage is within the adapter's supported range (220V-240VAC 50Hz) and use an appropriate outlet adapter if necessary (not included with this specific product unless specified at purchase).
  4. Power On: Once connected, your device should receive power. Refer to your device's manual for specific power-on procedures.
UpBright 15V AC Adapter with power cord and barrel connector

Image: The UpBright 15V AC adapter, showing the main unit, attached power cord, and the barrel connector. This image illustrates the complete adapter unit.

Operating Instructions

  • Intended Use: This adapter is designed solely for powering compatible Harman Kardon and JBL audio equipment requiring 15V AC input. Do not use it with devices that have different voltage or current requirements, or different connector types.
  • Safety Precautions:
    • Do not expose the adapter to water, moisture, or extreme temperatures.
    • Avoid dropping or subjecting the adapter to strong impacts.
    • Do not attempt to open or modify the adapter.
    • Ensure proper ventilation around the adapter during use to prevent overheating.
    • Unplug the adapter from the wall outlet when not in use for extended periods.
UpBright 15V AC Adapter showing product label with specifications

Image: A close-up view of the UpBright 15V AC adapter's label, displaying input (100-240V AC, 50/60Hz) and output (15V AC, 1.1A) specifications, along with safety certifications.

Maintenance

  • Cleaning: Disconnect the adapter from both the power outlet and your device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
  • Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
  • Inspection: Periodically inspect the adapter and its cable for any signs of damage, such as frayed wires, cracked casing, or bent pins. If damage is observed, discontinue use immediately.

Troubleshooting

Problem Possible Cause Solution
Device not powering on Adapter not properly connected; Power outlet not active; Device malfunction; Incorrect adapter used. Ensure adapter is fully plugged into both the device and the wall outlet. Test the outlet with another device. Verify the adapter's specifications match your device's requirements. Consult your device's manual.
Adapter feels hot Normal operation (slight warmth); Overload; Poor ventilation. A slight warmth is normal. Ensure the adapter is not covered and has adequate airflow. If it's excessively hot, unplug immediately and check for compatibility or device issues.
Flickering power/intermittent connection Loose connection; Damaged cable/connector. Check all connections for tightness. Inspect the cable and connector for visible damage. If damaged, discontinue use and replace the adapter.

Specifications

  • Brand: UPBRIGHT
  • Model Number: Harman / Kardon DP/N 01D430 15VAC Power
  • Input Voltage: 110V - 117V - 120VAC 60Hz (or 220V - 230V - 240VAC 50Hz for international versions)
  • Output Voltage: 15 Volts (AC)
  • Output Current: 1.1 Amps (1100mA)
  • Wattage: 15 watts
  • Connector Type: Barrel connector
  • Power Source: Corded Electric
  • Color: Black
  • Item Weight: 11 Ounces
  • Specification Met: UL

Warranty Information

This UpBright product comes with a warranty: 30 Days Refund - 24 Months Exchange. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty certificate provided with your product or contact customer support.

UpBright AC Adapter, representing the product covered by the warranty

Image: The UpBright AC adapter, representing the product covered by the warranty.

Support

For further assistance, technical support, or warranty inquiries, please contact the manufacturer, UPBRIGHT. Refer to the contact information provided with your purchase documentation or visit the official UPBRIGHT website.

© 2024 UPBRIGHT. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.