BoxWave ClearTouch Anti-Glare Screen Protector User Manual

1. Introduction

The BoxWave ClearTouch Anti-Glare Screen Protector is designed to safeguard the display of your Teguar TRT-5180-12 device. This protector features a matte finish to reduce screen glare and resist fingerprints, while providing a smooth, paper-like touch experience. It is precision-cut for a perfect fit and includes a glueless adhesive for clean application and removal.

2. Package Contents

Please verify that all items are present in your package:

• Two (2) ClearTouch Anti-Glare Screen Protectors
• One (1) Applicator Card
• One (1) Microfiber Cleaning Cloth
• One (1) Dust Removing Sticker

Image: Contents of the BoxWave ClearTouch Anti-Glare Screen Protector package, showing two screen protectors, an applicator card, a microfiber cloth, and a dust removing sticker.

Image: Close-up of the included accessories: an applicator card, a microfiber cleaning cloth, and a dust removing sticker.

3. Installation Instructions

Follow these steps carefully for optimal application of your screen protector:

1. Prepare Your Workspace: Ensure you are in a clean, dust-free environment. Wash your hands thoroughly to avoid transferring oils or dirt to the screen.
2. Clean the Device Screen: Use the provided microfiber cleaning cloth to thoroughly wipe down the screen of your Teguar TRT-5180-12. Ensure all smudges, fingerprints, and debris are removed.
3. Remove Dust Particles: Use the dust removing sticker to gently dab the screen surface. This will lift any remaining dust particles that could cause bubbles.
4. Align the Protector: Carefully peel back a small portion of the protective layer labeled "Step 1" (or similar) from one corner of the screen protector. Align the exposed edge of the screen protector with the corresponding edge of your device screen. Ensure the cutouts for cameras or sensors match perfectly.
5. Apply the Protector: Once aligned, slowly peel off the rest of the "Step 1" backing while simultaneously pressing the screen protector onto the device screen. Use the applicator card to gently smooth out the protector from the center outwards, pushing any air bubbles towards the edges.
6. Remove Top Layer: After the protector is fully applied and smoothed, carefully peel off the top protective layer, usually labeled "Step 2" (or similar).
7. Final Inspection: Perform a final check for any remaining bubbles or dust. Small bubbles may dissipate over 24-48 hours.

4. Features and Benefits

• Anti-Glare Technology: The matte finish disperses light, significantly reducing glare from ambient light sources and direct sunlight. This improves screen visibility and reduces eye strain. The ClearTouch Anti-Glare reduces 90% of UV rays.


Image: A tablet screen demonstrating reduced glare with the screen protector applied, compared to a screen without protection.

• Anti-Fingerprint Surface: The ultra-smooth matte surface repels smudges and fingerprints, keeping your screen cleaner for longer and maintaining a clear view.

Image: A split screen comparison showing a clean surface on one side (with protector) and a smudged surface on the other (without protector).
• Paper-like Feel: Experience a comfortable, high-end feel that mimics writing or drawing on paper, enhancing interaction with your device's touchscreen and stylus.


Image: A hand holding a stylus interacting with a tablet screen, demonstrating the smooth, paper-like texture provided by the screen protector.

• Precision Cut: Each ClearTouch protector is precisely cut to match the exact dimensions, contours, and cut-outs of your Teguar TRT-5180-12, ensuring full accessibility to all functions.


Image: A caliper measuring a blueprint, symbolizing the precision engineering and custom fit of the screen protector for the device.

• Glueless Adhesive: The special glueless adhesive ensures that no sticky residue is left on your screen if the protector is removed or repositioned.
• Two-Pack: The package includes two screen protectors, providing a spare for future use or for sharing.

5. Maintenance

To maintain the clarity and effectiveness of your BoxWave ClearTouch Anti-Glare Screen Protector:

• Clean the screen protector regularly with the provided microfiber cloth or another soft, lint-free cloth.
• For stubborn smudges, lightly dampen the microfiber cloth with water. Avoid using harsh chemical cleaners, alcohol, or abrasive materials, as these can damage the protector's coating.
• Do not scratch the surface with sharp objects.

6. Troubleshooting

If you encounter any issues during or after installation, refer to the following common solutions:

• Bubbles After Installation: Small air bubbles are common immediately after application. Use the applicator card to gently push these bubbles towards the nearest edge of the screen. For very small bubbles, they may disappear naturally within 24-48 hours as the adhesive settles.
• Dust Under the Protector: If you notice dust particles trapped under the protector, carefully lift the nearest corner of the screen protector using a piece of tape or your fingernail. Use the dust removing sticker to gently dab and lift the dust particle from both the screen and the protector's adhesive side. Then, slowly reapply the protector, smoothing it down with the applicator card.
• Misalignment: If the screen protector is significantly misaligned immediately after application, you may gently peel it off entirely and reapply it, following the installation steps carefully. Be cautious not to stretch or crease the protector during removal.
• Edges Not Sticking: Ensure the screen is thoroughly clean and free of dust or oils, especially along the edges. Press firmly with the applicator card along the edges to ensure proper adhesion.

7. Specifications

8. Warranty and Support

For any questions, concerns, or support regarding your BoxWave ClearTouch Anti-Glare Screen Protector, please contact BoxWave customer service. Refer to the product packaging or the official BoxWave website for the most current contact information and warranty details.