Product Overview
The IRIS USA IC-FAC2 Mattress and Furniture Vacuum Cleaner is designed for deep cleaning mattresses, couches, stairs, and other upholstered surfaces. This UL certified, mercury-free handheld vacuum features unique dust sensors, a vibrating agitator, and a HEPA H13 filter to effectively remove dust, allergens, and pet dander.
Image: IRIS USA IC-FAC2 Mattress and Furniture Vacuum Cleaner.
Setup
- Unboxing: Carefully remove all components from the packaging.
- Filter Assembly: Ensure the dust cup and HEPA filter are correctly installed. The dust cup easily detaches and reattaches for convenience.
- Power Connection: Plug the extra-long 13.1-foot power cord into a standard electrical outlet. The extended cord provides ample reach for various cleaning tasks.
Image: The washable filter being cleaned under running water.
Operating Instructions
- Power On/Off: Press the 'Menu ON/OFF' button located on the handle to turn the unit on or off.
- Mode Selection: Use the 'High', 'Standard', and 'Low' buttons to adjust the cleaning mode. The 'Low' mode typically deactivates the agitator for delicate surfaces.
- Dust Sensor Indicator: The vacuum is equipped with dust sensors and indicator lights. The light changes color to indicate the dust level on the surface being cleaned:
- Red: Not Clean (high dust level)
- Yellow/Orange: Almost Clean (moderate dust level)
- Green: Clean (low dust level)
- Vibrating Agitator: The agitator vibrates at 6,000 BPM to loosen and release dust and allergens from surfaces. This feature is active in 'High' and 'Standard' modes.
- UV Light: The integrated UV light helps sanitize surfaces during operation. It automatically turns off when the vacuum is lifted from the surface to ensure user safety.
- Contact Sensor: The vacuum features a contact sensor in its head. The unit will only operate when it detects contact with a surface. Lifting the vacuum will cause it to shut off.
Image: Dust indicator lights showing cleaning status.
Video: Demonstration of the IC-FAC2 mattress cleaner vacuum in use.
Maintenance
- Emptying the Dust Cup: An indicator light on the front of the vacuum flashes when it is time to empty the dust cup. Detach the dust cup by pressing the release button, twist off the lid, and empty the contents into a trash receptacle.
- Cleaning the Filter: The dust cup, brush roller, and filter cup are all washable. Rinse them under running water and allow them to air dry completely before reassembling.
- Brush Roller Cleaning: Periodically check the brush roller for tangled hair or debris. Remove any obstructions to maintain optimal performance.
Image: Indicator light for dust cup emptying and filter change.
Troubleshooting
- Vacuum Not Turning On: Ensure the power cord is securely plugged into a working outlet. Check that the contact sensor on the bottom of the vacuum is pressed against a surface.
- Reduced Suction: Empty the dust cup and clean the HEPA filter. Check the brush roller and suction nozzle for any blockages.
- Dust Indicator Light Malfunction: If the dust indicator light does not change color despite visible dust, ensure the sensors are clean and free from obstruction. If the issue persists, contact customer support.
Specifications
- Model: IC-FAC2
- Brand: IRIS USA
- Dimensions: 9.80"L x 5.70"W x 15.90"H
- Weight: 3.5 pounds
- Power Source: Corded Electric
- Wattage: 400W
- Filter Type: Foam or Cloth (HEPA H13 material)
- Capacity: 1.5 Liters
- Noise Level: 75 Decibels
- Special Feature: Bagless, Dust Sensors, UV Light, Vibrating Agitator
Image: Product dimensions.
Official Product Videos
Video: Overview of the IC-FAC2 Mattress and Furniture Vacuum Cleaner by IRIS USA, Inc.