Progress Lighting P400097-141

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Progress Lighting Gulliver Collection 4-Light Linear Chandelier Instruction Manual

Model: P400097-141 | Brand: Progress Lighting

Product Overview

This manual provides instructions for the installation, operation, and maintenance of the Progress Lighting Gulliver Collection 4-Light Linear Chandelier, model P400097-141. This fixture features a design with three circular bands, a galvanized finish with antique white accents, and accommodates four medium base bulbs. It is suitable for indoor use in various settings such as hallways, dining rooms, and kitchens.

Progress Lighting Gulliver Collection 4-Light Linear Chandelier, front view

Front view of the Progress Lighting Gulliver Collection 4-Light Linear Chandelier.

Important Safety Information

WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. Consult a qualified electrician if you are unsure about the installation process. All wiring connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).

CAUTION: Handle glass components with care. This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling.

Package Contents

Verify that all components listed below are present before beginning installation.

Diagram showing package contents and hardware for the chandelier

Illustration of the fixture components and included hardware.

Fixture Components
PartDescriptionQuantity
AFixture1
BPipe2
CCanopy1
DBody1
Hardware Contents (Not Actual Size)
ItemDescriptionQuantity
AANipple (1/4IP)1
BBWire connector3
CCMounting plate (1/4IP)1
DDHex nut (1/4IP)1
EEScrew (#8)1
FFFlat washer1
GGFinial (1/4IP)1
HHChain (72")1
JJScrew #8-324

Setup and Installation

Before starting installation, ensure the power is turned off at the circuit breaker. Follow these steps carefully for proper assembly and wiring.

Assembly and Installation Instructions diagram for the chandelier

Detailed diagram for chandelier assembly and wiring connections.

  1. Canopy Mounting: Attach the mounting plate (CC) to the outlet box using screws (JJ).
  2. Fixture Assembly: Connect the pipes (B) to the fixture (A) and body (D) as shown in the diagram.
  3. Chain Installation: The fixture includes 72 inches of chain (HH) for adjustable hanging heights. Determine the desired height and adjust the chain length accordingly.
  4. Wiring Connections:
    • Connect the bare copper or green ground wire from the fixture to the green or bare copper ground wire from the outlet box.
    • Connect the white wire from the fixture to the white (neutral) wire from the outlet box.
    • Connect the black wire from the fixture to the black (hot) wire from the outlet box.
    • Secure all connections with wire connectors (BB).
  5. Canopy Attachment: Secure the canopy (C) to the mounting plate using the finial (GG).
  6. Bulb Installation: Install four medium base bulbs (E26, sold separately) into the sockets. Do not exceed 75W per bulb.

Adjusting Hanging Height

Diagram showing chain for adjustable hanging height

The included chain allows for flexible hanging heights and accommodation of sloped ceilings.

The chandelier comes with 72 inches of chain, allowing for customization of the hanging height to suit your space. For optimal placement, consider the following guidelines:

  • Dining Room: Typically, the bottom of the chandelier should be 30-34 inches above the dining table.
  • Kitchen Island: For kitchen islands, maintain a distance of 30-36 inches from the countertop to the bottom of the fixture.
  • High Ceilings/Stairwells: Adjust the chain length to ensure the fixture is visually balanced and provides adequate illumination without obstructing pathways.
Diagram illustrating recommended chandelier height over a dining table

Recommended height for chandeliers over a dining table.

Operating Instructions

Bulb Information

Bulb and dimming information for the chandelier

Details on compatible bulb types and dimming capabilities.

  • This fixture requires four E26 (medium base) bulbs.
  • Maximum wattage per bulb is 75W.
  • Compatible bulb types include LED, CFL, halogen, or incandescent.
  • For a rustic aesthetic, ST64 vintage bulbs are recommended. For a contemporary look, A19 bulbs can be used.
  • LED bulbs are recommended for energy efficiency.

Dimming Functionality

The chandelier is fully dimmable when used with compatible dimmable bulbs and a compatible wall dimmer switch (both sold separately). Ensure your dimmer switch is rated for the type and wattage of bulbs you install.

Maintenance

To maintain the appearance and functionality of your chandelier, follow these simple maintenance guidelines:

  • Cleaning: Turn off the power and allow the fixture to cool before cleaning. Wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
  • Bulb Replacement: Ensure power is off before replacing bulbs. Allow old bulbs to cool completely. Replace with E26 medium base bulbs, not exceeding 75W.
  • Inspection: Periodically check all connections and mounting hardware to ensure they remain secure.

Troubleshooting

If your chandelier is not functioning correctly, refer to the following common issues and solutions:

ProblemPossible CauseSolution
Light does not turn on.
  • Power is off at the circuit breaker.
  • Loose wire connections.
  • Defective bulb(s).
  • Faulty wall switch.
  • Check the circuit breaker and ensure power is on.
  • Turn off power, then check and tighten all wire connections.
  • Replace bulb(s) with new, working ones.
  • Test the wall switch; replace if necessary.
Light flickers.
  • Loose bulb.
  • Incorrect bulb type for dimmer.
  • Loose wire connection.
  • Tighten bulb(s).
  • Ensure bulbs are dimmable and compatible with your dimmer switch.
  • Turn off power, then check and tighten all wire connections.
Fixture hums.
  • Incompatible dimmer switch.
  • Loose wiring.
  • Replace dimmer switch with one compatible with your bulb type.
  • Turn off power, then check and tighten all wire connections.

Specifications

Product specification sheet for Progress Lighting P400097-141

Official product specification sheet for model P400097-141.

AttributeDetail
BrandProgress Lighting
Model NameP400097-141 (Gulliver)
ColorGray (Galvanized with Antique White Accents)
MaterialAlloy Steel
StyleModern Farmhouse, Urban Industrial, Coastal
Light Fixture FormChandelier
Room TypeDining Room, Hallway, Foyer, Great Room, Kitchen Island
Product Dimensions38.5" L x 10.5" W x 17" H
Overall Height w/ Chain91-1/2" (adjustable)
Canopy Dimensions13.375" W x 4.75" L x 0.5" H
Power SourceAC
Installation TypeChain Mount
Light Source TypeE26 Medium Base
Number of Light Sources4
Voltage120 Volts
Wattage75 watts (max per bulb)
DimmableYes (with compatible bulbs and dimmer)
Item Weight17.63 pounds
Assembly RequiredYes
UPC785247219445

Warranty and Support

This Progress Lighting product is covered by a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For technical assistance, missing parts, or warranty claims, please contact Progress Lighting Customer Service:

Please have your model number (P400097-141) and date of purchase available when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.