1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting Judson Collection 11" Flush Mount light fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Image 1.1: The Judson Collection 11-inch Flush Mount light fixture in Bronze finish, featuring a clear glass shade and a single exposed bulb.
2. Important Safety Information
WARNING: Risk of electric shock. Turn off power at the main circuit breaker before beginning installation. All wiring connections must be made in accordance with local electrical codes and ordinances. If you are unsure about any part of the installation, consult a qualified electrician.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, and/or other reproductive harm. Thoroughly wash hands after installing, handling, cleaning, or otherwise touching this product.
CAUTION: All glass is fragile. Use care when handling glass components.
- Ensure the electrical supply to the fixture is disconnected before installation or maintenance.
- Use only the specified bulb type and wattage.
- Do not exceed the maximum wattage indicated on the fixture.
- Fixture is designed for indoor use in damp locations.
3. Package Contents
Verify that all components are present before beginning installation:
- Light Fixture Assembly (A)
- Mounting Strap (B)
- Outlet Box Screws (C)
- Ground Screw (D)
- Wire Nuts (E)
- Canopy Screws (F)
- Glass Shade (G)
- Socket Ring (H)
- Bulb (not included)
Note: Specific component names may vary slightly from the diagram. Refer to the installation sheet for visual identification.
4. Tools Required (Not Included)
- Phillips Head Screwdriver
- Flat Head Screwdriver
- Wire Strippers
- Pliers
- Electrical Tape
- Safety Glasses
5. Installation Instructions
Before installation, ensure power is turned off at the main circuit breaker. Follow these steps carefully:
5.1. Prepare for Installation
- Turn off electricity at the main fuse box or circuit breaker.
- Carefully unpack the fixture and check for any damage.
- Identify all parts using the package contents list.
5.2. Mounting the Fixture
- Attach the mounting strap (B) to the outlet box using the outlet box screws (C).
- Pull the electrical wires from the outlet box through the center hole of the mounting strap.
5.3. Wiring Connections
Connect the electrical wires as follows, using wire nuts (E) and ensuring secure connections:
- Connect the bare copper or green ground wire from the fixture to the green ground screw (D) on the mounting strap, then to the green or bare copper ground wire from the outlet box.
- Connect the white wire from the fixture to the white (neutral) wire from the outlet box.
- Connect the black wire from the fixture to the black (hot) wire from the outlet box.
After making connections, carefully tuck all wires into the outlet box.
5.4. Securing the Fixture
- Align the fixture canopy with the mounting strap and secure it using the canopy screws (F).
- Install the light bulb (not included) into the socket. This fixture uses one medium base bulb (E26), 75W max.
- Place the glass shade (G) over the socket and secure it with the socket ring (H).
Image 5.1: Detailed assembly and installation instructions diagram for the Judson Flush Mount.
Image 5.2: Dimensional diagram indicating the fixture's 11-inch width and 12-inch height.
5.5. Video Guide: Close-to-Ceiling Lighting Trends
For additional context on close-to-ceiling lighting and its applications, watch this video from Progress Lighting:
Video 5.3: An official video from Progress Lighting discussing trends and applications for close-to-ceiling light fixtures, providing insights into where this type of lighting is best utilized.
6. Operating Instructions
Once installed, restore power at the circuit breaker. The fixture is operated via a standard wall switch (not included). This fixture is dimmable when used with a dimmable bulb and a compatible dimmer switch.
- Bulb Type: Uses one medium base (E26) bulb.
- Maximum Wattage: 75 watts.
- Dimmable Feature: For dimming functionality, use a dimmable E26 bulb and a compatible dimmer switch.
7. Care and Maintenance
To ensure the longevity and appearance of your light fixture, follow these maintenance guidelines:
- Cleaning: Always turn off the power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Glass Shade: The clear glass shade can be cleaned with a mild glass cleaner and a soft cloth. Ensure the shade is completely dry before restoring power.
- Bulb Replacement: Turn off power before replacing the bulb. Allow the bulb to cool completely before touching. Replace with an E26 medium base bulb, not exceeding 75 watts.
8. Troubleshooting
If your light fixture is not functioning correctly, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | 1. Power is off 2. Loose wiring connection 3. Faulty bulb | 1. Check circuit breaker/fuse 2. Verify all wiring connections are secure (with power off) 3. Replace bulb |
| Light flickers | 1. Loose bulb 2. Incompatible dimmer switch/bulb 3. Loose wiring | 1. Tighten bulb 2. Ensure dimmer and bulb are compatible for dimming 3. Check wiring connections (with power off) |
| Glass shade is loose | Socket ring not tightened | Carefully tighten the socket ring until the shade is secure. |
If the problem persists after attempting these solutions, please contact customer support.
9. Product Specifications
| Feature | Detail |
|---|---|
| Brand | Progress Lighting |
| Model Name | Judson |
| Model Number | P350074-020 |
| Color | Bronze |
| Material | Alloy Steel, Glass |
| Style | Traditional |
| Light Fixture Form | Ceiling |
| Room Type | Bedroom, Hallway, Kitchen, Lobby |
| Product Dimensions | 11"L x 11"W x 12"H |
| Specific Uses | Residential |
| Indoor/Outdoor Usage | Indoor |
| Power Source | AC |
| Installation Type | Flush Mount |
| Special Feature | Dimmable |
| Light Source Type | Incandescent (compatible with LED, CFL, Halogen) |
| Shade Material | Glass |
| Number of Light Sources | 1 |
| Voltage | 120 Volts |
| Wattage | 75 watts (max) |
| Bulb Base | E26 |
| Item Weight | 3.65 Pounds |
| Assembly Required | Yes |
| UPC | 785247216772 |
10. Warranty & Support
Warranty: This Progress Lighting product is covered by a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or normal wear and tear.
Customer Support: For technical assistance, missing parts, or warranty claims, please contact Progress Lighting customer service. Refer to the contact information provided on the product packaging or the official Progress Lighting website.
