1. Introduction
The iDance Party Mic PM10 is a portable Bluetooth microphone with an integrated speaker, designed for entertainment and karaoke. This manual provides essential information for the safe and effective use of your device, including setup, operation, and maintenance instructions.
2. Product Overview
The iDance Party Mic PM10 combines a microphone and a 5W speaker into a single portable unit, offering wireless audio streaming and playback capabilities. It features a built-in rechargeable battery for extended use and a Micro SD card slot for direct music playback.
Key Features:
- Portable microphone with integrated 5W speaker.
- Bluetooth connectivity for wireless audio streaming.
- Built-in 2000 mAh battery providing up to 5 hours of autonomy.
- Micro SD card slot for direct music playback.
- Compact design: 25 cm height, 300 g weight for easy handling.
Components:
Image Description: A full view of the iDance Party Mic PM10, a blue portable microphone with an integrated speaker. The microphone grille is at the top, followed by a control panel on the handle. The base of the microphone features the iDance logo and a light ring.
- Microphone Grille: Captures vocal input.
- Control Panel: Contains power, volume, echo, and light controls.
- Speaker: Integrated speaker for audio output.
- Micro SD Card Slot: For playing music directly from a Micro SD card.
- Charging Port: For recharging the internal battery.
3. Setup
Initial Charging:
Before first use, fully charge the iDance Party Mic PM10. Connect the provided charging cable to the charging port on the microphone and to a compatible USB power source. The 'CHARGE' indicator light on the control panel will illuminate during charging and turn off when fully charged.
Powering On/Off:
Press and hold the power button (⏻) on the control panel for a few seconds to turn the microphone on or off. A sound indicator will confirm the power status.
4. Operating Instructions
Bluetooth Pairing:
- Ensure the microphone is powered on.
- Activate Bluetooth on your compatible device (e.g., smartphone, tablet, laptop).
- Search for available Bluetooth devices. The microphone will appear as 'iDance PM10' or similar.
- Select the microphone from the list to pair. A confirmation sound will indicate successful pairing.
- You can now stream music from your device to the microphone's speaker and sing along.
Micro SD Playback:
- Insert a Micro SD card containing MP3 audio files into the Micro SD card slot.
- The microphone will automatically switch to Micro SD playback mode and begin playing music.
- Use the control panel buttons (if available) to navigate tracks or adjust volume.
Adjusting Echo Effect:
Use the 'ECHO' slider on the control panel to increase or decrease the echo effect on your voice. Slide upwards for more echo, and downwards for less.
Controlling Volume:
Use the volume slider on the control panel to adjust the overall sound output. Slide upwards to increase volume, and downwards to decrease.
Light Control:
Press the light button (💡) on the control panel to cycle through different light modes or to turn the integrated lights on/off.
5. Maintenance
Cleaning:
Wipe the microphone with a soft, dry cloth. Do not use abrasive cleaners or solvents. Avoid exposing the device to excessive moisture.
Storage:
Store the microphone in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
6. Troubleshooting
No Power:
- Ensure the battery is charged. Connect the microphone to a power source and allow it to charge for at least 30 minutes before attempting to power on again.
- Verify the charging cable and adapter are functioning correctly.
No Sound Output:
- Check the volume level on both the microphone and the connected Bluetooth device.
- Ensure the microphone is properly paired via Bluetooth or that the Micro SD card is correctly inserted and contains playable files.
- Try re-pairing the Bluetooth connection.
Bluetooth Disconnection:
- Ensure the microphone and the Bluetooth device are within the effective range (typically 10 meters) and there are no significant obstructions.
- Check for interference from other wireless devices.
- Turn off and restart both the microphone and the Bluetooth device, then attempt to pair again.
7. Specifications
- Brand: iDance
- Model Name: PM-6
- Connectivity Technology: Bluetooth
- Compatible Devices: Speaker
- Color: Blue
- Audio Sensitivity: 80 Decibels
- Dimensions (L x W x H): 22 x 10 x 6 centimeters
- Power Source: Battery Powered
- Material: Acrylonitrile Butadiene Styrene
- Signal-to-Noise Ratio: 85 dB
- Battery Capacity: 2000 mAh
- Battery Life: Up to 5 hours
- Speaker Output: 5W
- Weight: 300g
8. Warranty and Support
Specific warranty details and support contact information are not provided in the product data. For warranty claims or technical assistance, please refer to the retailer where the product was purchased or visit the official iDance website.
- Spare Parts Availability: Information not available.
- Guaranteed Software Updates Until: Information not available.
