Woods 41546 Metal Surge Protector User Manual

1. Important Safety Instructions

Please read and understand all instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Indoor Use Only: This surge protector is designed for indoor use in dry locations. Do not use outdoors or in wet conditions.
• Electrical Rating: Do not exceed the electrical rating of 120V AC, 15A, 1875W. Overloading the surge protector can cause a fire hazard.
• Grounding: Ensure the surge protector is plugged into a properly grounded 3-prong outlet. Do not remove the grounding prong.
• Extension Cords: Do not plug this surge protector into another relocatable power tap or extension cord.
• Children: Keep children away from the surge protector and its connected devices.
• Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

2. Product Overview

The Woods 41546 Metal Surge Protector provides reliable power distribution and surge protection for your electronic devices. It features a durable metal housing and a 3-foot power cord for flexible placement.

Figure 1: Woods 41546 Metal Surge Protector. A top-down view of the Woods 41546 Metal Surge Protector, showcasing its dark gray metal housing, six grounded outlets, and the lighted circuit breaker switch.

Key Features:

• 6 Grounded Outlets: Provides power for multiple devices.
• 900 Joules Surge Protection: Protects connected electronics from power surges and spikes.
• Lighted Circuit Breaker Switch: Acts as a power switch and overload protection.
• Green LED Indicator: Confirms active surge protection.
• Sliding Outlet Safety Covers: Protects unused outlets from dust and debris.
• 3-Foot Power Cord: Offers flexibility in placement.
• Durable Metal Housing: Ensures longevity and robust construction.
• 4 Mounting Key Holes: Allows for wall or surface mounting.

Figure 2: Key Features. A detailed view highlighting the resettable circuit breaker switch, the six grounded outlets, and specifically pointing out the two wider-spaced outlets designed for larger power adapters.

3. Setup and Installation

3.1 Initial Setup

1. Uncoil the 3-foot power cord completely.
2. Plug the surge protector's 3-pronged plug into a standard 120V AC grounded wall outlet.
3. Press the lighted circuit breaker switch to the 'ON' position. The switch will illuminate red, and the green 'PROTECTED' LED will light up, indicating the unit is powered and surge protection is active.
4. Plug your electronic devices into the available outlets. Utilize the two wider-spaced outlets for larger power adapters.

3.2 Mounting the Surge Protector

The Woods 41546 can be mounted to a wall or other flat surface using its four keyhole slots on the back.

1. Measure the distance between the keyhole slots on the back of the surge protector.
2. Mark the corresponding locations on your desired mounting surface.
3. Install screws (not included) into the marked locations, leaving the screw heads slightly protruding. Ensure the screws are appropriate for your mounting surface.
4. Align the keyhole slots on the back of the surge protector with the screw heads and slide the unit down to secure it in place.

Figure 3: Mounting Keyholes and Cord. The reverse side of the surge protector, illustrating the four mounting keyholes for wall or surface installation, the attached 3-foot power cord, and the 3-pronged grounded plug.

4. Operation

4.1 Power On/Off and Circuit Breaker

• The red lighted switch controls the power to all six outlets. Press it to the 'ON' position to supply power and to the 'OFF' position to cut power.
• This switch also functions as a circuit breaker. In the event of an overload (too many devices drawing too much power), the switch will automatically trip to the 'OFF' position to protect your devices and the surge protector.
• To reset the circuit breaker after an overload, unplug some devices, then press the switch back to the 'ON' position.

4.2 LED Indicators

• Red Lighted Switch: Illuminates when the surge protector is powered 'ON'.
• Green 'PROTECTED' LED: This light indicates that the surge protection components are active and functioning correctly. If this light is off, the surge protection has been compromised, and the unit should be replaced.

Figure 4: Safety Covers and Protection Indicator. A close-up of the surge protector demonstrating the sliding safety covers over unused outlets and the green LED light, which indicates active surge protection.

4.3 Sliding Outlet Safety Covers

Each outlet is equipped with a sliding safety cover. Slide the cover to the side to expose the outlet for use. Slide it back over the outlet when not in use to prevent dust accumulation and accidental contact.

5. Maintenance

• Cleaning: Disconnect the surge protector from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
• Inspection: Periodically inspect the power cord and the surge protector for any signs of damage, such as frayed wires or cracked housing. If damage is found, discontinue use and replace the unit.

6. Troubleshooting

• No Power to Devices:
  • Ensure the surge protector's plug is fully inserted into a working wall outlet.
  • Check if the lighted circuit breaker switch is in the 'ON' position. If it has tripped to 'OFF', unplug some devices and reset it.
  • Verify that the wall outlet itself is functioning by plugging in another device directly.
• Green 'PROTECTED' LED is Off:
  • If the green LED is off while the unit is powered on, it indicates that the surge protection components have absorbed a significant surge and are no longer providing protection. The unit will still function as a power strip, but it will not protect against future surges. For continued protection, the surge protector should be replaced.

7. Specifications

8. Warranty and Support

8.1 Connected Equipment Warranty

This Woods surge protector includes a $100,000 Connected Equipment Warranty. This warranty provides financial protection for equipment properly connected to the surge protector that is damaged by a power surge while the surge protector is functioning correctly. Please refer to the warranty documentation included with your product for full terms, conditions, and claim procedures.

8.2 Customer Support

For technical assistance, warranty claims, or further information, please contact Woods customer support. Contact details are typically available on the product packaging or the manufacturer's official website.