SCANGRIP MAG PEN 3 Instruction Manual

Introduction

The SCANGRIP MAG PEN 3 is a versatile and compact pencil work light and spotlight designed for professional use. It provides powerful illumination up to 150 lumens, making it ideal for accessing confined spaces and detailed work. Its durable construction and built-in magnetic features enhance usability and convenience.

Key Features

• Dual Illumination: Combines a powerful work light (up to 150 lumens) and a precise spotlight (80 lumens).
• Compact Design: Allows access to the most inaccessible places.
• Stepless Dimmer: Adjustable light output from 10% to 100% for various tasks.
• Durable Construction: Built for longevity with a comfortable grip.
• Integrated Magnets: For flexible suspension and storage.
• Turnable Clip: Convenient for pocket carrying.

Figure 1: Overview of SCANGRIP MAG PEN 3 with key features highlighted, including the spotlight, bright LED, turnable clip, and built-in magnets.

Setup

The SCANGRIP MAG PEN 3 is designed for immediate use. Before first use, it is recommended to fully charge the device.

Charging the Device

1. Locate the charging port, typically at the end of the pen light.
2. Connect the provided USB charging cable to the device and to a compatible USB power source (e.g., computer, wall adapter).
3. The charging indicator light will illuminate, typically red during charging and green when fully charged.
4. Allow approximately 3-4 hours for a full charge.

Figure 2: The SCANGRIP MAG PEN 3, showing its compact form factor. The charging port is located at one end of the device.

Operating Instructions

The MAG PEN 3 features intuitive controls for easy operation of its light functions.

Power On/Off and Mode Selection

• Press the power button once to activate the main work light.
• Press the power button a second time to switch to the spotlight mode.
• Press the power button a third time to turn the device off.

Adjusting Brightness (Dimmer Function)

While the main work light is active, the stepless dimmer function allows for precise brightness control.

• To dim the light, press and hold the power button. The light output will gradually decrease.
• Release the button at the desired brightness level.
• To increase brightness, press and hold the power button again. The light output will gradually increase.
• The dimmer function operates between 10% and 100% illumination.

Using the Magnetic Base and Clip

• The built-in magnets allow for hands-free operation by attaching the light to metallic surfaces.
• The turnable clip can be used to secure the light to a pocket, belt, or other convenient location.

Figure 3: The SCANGRIP MAG PEN 3 held comfortably in hand, demonstrating its ergonomic design and portability.

Figure 4: The SCANGRIP MAG PEN 3 in use, demonstrating its utility for inspecting hard-to-reach areas. Its compact size and powerful light are beneficial for detailed tasks.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your SCANGRIP MAG PEN 3.

Cleaning

• Wipe the exterior of the light with a soft, damp cloth.
• Do not use abrasive cleaners or solvents, as these can damage the finish.
• Ensure the charging port is free of dust and debris.

Storage

• Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
• If storing for extended periods, charge the battery every 3-6 months to maintain battery health.

Battery Care

• The MAG PEN 3 uses a built-in Lithium Ion battery. Do not attempt to replace the battery yourself.
• Avoid fully discharging the battery frequently, as this can reduce its lifespan.
• Dispose of the device and its battery according to local regulations when it reaches the end of its life.

Troubleshooting

This section addresses common issues you might encounter with your SCANGRIP MAG PEN 3.

Specifications

Warranty and Support

For warranty information and technical support, please refer to the official Scangrip website or contact their customer service department. Keep your purchase receipt as proof of purchase.

Manufacturer: Scangrip Lighting

Website: www.scangrip.com