Introduction
The AutoPot FlexiTank Pro 25 Gallon is a collapsible water reservoir designed for efficient water storage and delivery in AutoPot Watering Systems. Its robust, light-tight construction and internal capacity markings make it a practical solution for various gardening and hydroponic applications. This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your FlexiTank Pro.
Product Overview
An image showing the AutoPot FlexiTank Pro 25 Gallon in its assembled, upright position, ready for use. The tank is white with a black base and top rim, featuring the 'FlexiTank PRO' logo on the side and a spigot at the bottom.
The FlexiTank Pro features a reflective and light-tight skin, designed for durability and ease of use. It is fully collapsible for convenient storage and transport. Concealed reservoir supports and internal capacity markings enhance its functionality. This reservoir is an integral component of AutoPot Watering Systems, which operate without the need for power, pumps, or timers, relying solely on gravity pressure.
Setup Instructions
- Unpack Components: Carefully remove all components from the packaging. Ensure all parts are present: the main tank body, support poles, and tap assembly.
- Positioning: Choose a flat, stable surface for the FlexiTank. Ensure the location is suitable for water storage and allows easy access for filling and connection to your AutoPot system.
- Assemble Support Poles: Insert the support poles into the designated sleeves around the top rim of the tank. These poles provide structural integrity when the tank is filled.
- Install Tap Assembly: Locate the tap outlet at the bottom of the tank. Screw the tap assembly securely into place. Ensure a watertight seal. Refer to the manufacturer's instructions for specific tap installation details to prevent leaks.
- Connect to System: Once assembled, connect the FlexiTank to your AutoPot Watering System using appropriate tubing and connectors. Ensure all connections are tight and secure.
- Initial Fill and Leak Check: Slowly fill the FlexiTank with a small amount of water. Carefully inspect all connections, especially the tap, for any signs of leaks. If leaks are detected, tighten connections or re-seat the tap assembly.
Operating Instructions
- Filling the Tank: Fill the FlexiTank with water or nutrient solution. The internal markings indicate capacity levels. Do not overfill.
- Gravity Feed: The AutoPot system relies on gravity. Ensure the FlexiTank is positioned at a higher elevation than the watering system's modules to allow for proper water flow.
- Monitoring Water Levels: Regularly check the water level in the FlexiTank. Refill as needed to ensure continuous supply to your plants.
- Nutrient Solutions: If using nutrient solutions, ensure they are thoroughly mixed before adding to the FlexiTank.
- Draining: To drain the tank, open the tap assembly. For complete draining, the tank may need to be slightly tilted or elevated.
Maintenance
- Regular Cleaning: Periodically drain and clean the FlexiTank to prevent algae growth and nutrient residue buildup. Use a mild, non-abrasive cleaning solution and rinse thoroughly with clean water.
- Tap Inspection: Inspect the tap assembly and all connections for wear or damage. Replace any worn parts to prevent leaks.
- Storage: When not in use, drain the tank completely, clean it, and allow it to dry. Collapse the tank and store it in a cool, dry place away from direct sunlight.
- Avoid Punctures: Be careful not to puncture the tank material with sharp objects.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water Leakage | Loose tap assembly or connections; damaged tank material. | Tighten all connections. Re-seat the tap assembly. Inspect tank for damage; if damaged, repair or replace. |
| No Water Flow | Tank empty; tap closed; blockage in tubing; tank not elevated sufficiently. | Refill tank. Open tap. Check tubing for kinks or blockages. Ensure tank is higher than the watering system. |
| Algae Growth | Exposure to light; infrequent cleaning. | Ensure tank is light-tight (FlexiTank Pro is designed for this). Clean tank regularly. |
Specifications
- Model: FlexiTank Pro 25 Gallon
- Capacity: 25 Gallons (approximately 95 Liters)
- Material: Reflective, light-tight, rugged collapsible fabric
- Compatibility: Designed for use with AutoPot Watering Systems
- ASIN: B077J6CG2S
Warranty and Support
AutoPot products are manufactured to high standards. For specific warranty information, please refer to the documentation provided with your purchase or visit the official AutoPot website. For technical support or assistance with your FlexiTank Pro, please contact AutoPot customer service.
