1. Product Overview
The UpBright 8V 2A AC/DC Adapter is a reliable power supply designed for various Ingenico payment terminals. It provides a stable 8V to 8.4V DC output at 2.0 Amps, ensuring efficient and safe operation of your compatible devices. This adapter features built-in protection mechanisms to safeguard against electrical issues.
Key Features:
- Universal Input Voltage: Supports 100-240VAC, 50/60Hz for worldwide compatibility.
- Output: 8V - 8.4V DC, 2.0 Amps (2000mA).
- Safety Protections: Equipped with Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP).
- Compatibility: Specifically designed for Ingenico iPP320, iPP350, ISC200, ISC250, iCT250, iCT-01P1100F, iSS220, iSS250 payment terminals, and models PSC16A-080, PSC16A-080L6, 192011597, 296196003, 153051, 179901469.
Image 1.1: The UpBright 8V 2A AC/DC Adapter, showing the main unit and attached power cord with barrel connector.
2. Setup Instructions
Follow these steps to correctly set up your UpBright AC/DC adapter with your Ingenico payment terminal.
- Verify Compatibility: Ensure your Ingenico device model is listed as compatible with this adapter. Refer to the 'Product Overview' section or your device's manual.
- Check Polarity: Confirm the polarity of the adapter's barrel connector matches the polarity requirement of your Ingenico device. This adapter typically features a center-positive polarity. Incorrect polarity can damage your device.
Image 2.1: Diagram illustrating the correct (center positive) and incorrect (center negative) polarity for the barrel connector. Ensure your device requires center positive.
- Connect to Device: Insert the barrel connector of the adapter firmly into the power input port of your Ingenico payment terminal.
- Connect to Power Outlet: Plug the AC adapter into a standard electrical wall outlet (100-240VAC).
- Power On: Your Ingenico device should now receive power. Follow your device's specific instructions to power it on, if applicable.
For international use, a suitable outlet adapter may be required, depending on your region's electrical standards. Only one outlet adapter is typically needed.
Image 2.2: Examples of common international power outlet adapters (AU, EU, UK types) that may be used with the UpBright AC/DC adapter for different regions.
3. Operating Instructions
The UpBright AC/DC adapter functions as a dedicated power source for your compatible Ingenico payment terminal. Once properly connected, it continuously supplies the necessary electrical power for your device's operation.
- Ensure the adapter is securely plugged into both the wall outlet and the payment terminal.
- The adapter is designed for continuous use within its specified voltage and current limits.
- No user interaction is required with the adapter itself during normal operation, beyond ensuring a stable connection.
4. Maintenance
Proper care and maintenance will extend the lifespan of your UpBright AC/DC adapter.
- Cleaning: Disconnect the adapter from both the power outlet and the device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures when not in use. Avoid tightly winding the cable to prevent damage.
- Handling: Do not drop, disassemble, or attempt to repair the adapter. Avoid exposing it to moisture or liquids.
- Cable Care: Regularly inspect the power cable for any signs of fraying, cuts, or damage. If damage is observed, discontinue use immediately and replace the adapter.
5. Troubleshooting
If you encounter issues with your UpBright AC/DC adapter, refer to the following troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on | Loose connection, faulty outlet, adapter failure, device issue. |
|
| Adapter feels unusually hot | Overload, poor ventilation, internal fault. |
|
| Device powers on but is unstable | Insufficient power, damaged cable, device fault. |
|
The adapter includes Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP). If the adapter stops functioning, these protections may have been activated due to an electrical anomaly. Disconnect the adapter, inspect for any issues, and reconnect. If the problem persists, the adapter may need replacement.
6. Specifications
| Specification | Detail |
|---|---|
| Model Number | PSC16A-080 |
| Input Voltage | 100-240VAC, 50/60Hz |
| Output Voltage | 8V - 8.4V DC |
| Output Current | 2 Amps (2000mA) |
| Wattage | 16 Watts |
| Connector Type | Barrel Connector (Center Positive) |
| Protection Features | OVP (Over Voltage Protection), OCP (Over Current Protection), SCP (Short Circuit Protection) |
| Product Dimensions | Approximately 3 x 3 x 1 inches |
| Item Weight | Approximately 3.2 ounces |
| Included Components | 1 x AC Adapter |
| Manufacturer | UpBright |
7. Warranty and Support
The UpBright AC/DC Adapter comes with a limited warranty to ensure your satisfaction and product reliability.
- Refund Policy: UpBright offers a 30-day refund period from the date of purchase.
- Exchange Policy: The product is eligible for a 24-month exchange for manufacturing defects or performance issues.
For warranty claims, technical support, or any inquiries regarding your UpBright product, please contact the manufacturer directly through their official channels or the retailer from whom the product was purchased.
