Transcend DrivePro Body 30 Body Camera: User Manual

Introduction

The Transcend DrivePro Body 30 is a robust body camera designed for professional use, offering high-resolution video recording, night vision capabilities, and wireless connectivity. This manual provides detailed instructions to help you effectively use and maintain your device.

What's in the Box

• DrivePro Body Camera
• 3.5mm to USB cable
• Adapter
• 360° rotating clip
• Velcro holder

Product Overview

Buttons and Controls

Familiarize yourself with the main buttons on your DrivePro Body 30 camera:

Image: Front view of the DrivePro Body 30 with key buttons highlighted.

• Power Button (Center): Long press once to power on. Short press twice to switch between buffering and recording modes.
• Snapshot Button (Below Power Button): Long press once to toggle Infrared LED On/Off. Short press once to take a snapshot.
• Status Button (Left Side, Top): Long press once for Bluetooth connection. Short press once to check battery level and recording status.
• Assistive Button (Right Side, Top): Long press once to toggle LED lamp and buzzer On/Off (Stealth Mode). Short press once to toggle microphone On/Off (Silent Mode).

For a visual guide on button functions, please refer to the video below:

Video: Demonstrates the functions of each button on the DrivePro Body 30 camera.

LED Indicators

The DrivePro Body 30 features LED indicators to provide status information:

Image: Top view of the DrivePro Body 30 highlighting the battery indicator.

• Battery Indicator (Top Left):
• Red Flashing: Recording, Low battery.
• Orange Solid: Charging (connected to computer/power).
• Green Solid: Battery > 67% remaining.
• Orange Solid: Battery 67% remaining.
• Red Solid: Battery < 31% remaining.
• Status Indicator (Top Right):
• Green Flashing: Memory almost full (during recording).
• Blue Flashing: Bluetooth pairing (during recording).
• Blue Solid: Buffering mode when checking status (during recording).
• Red Solid: Silent mode (during recording).
• Red Flashing: Recording mode when checking status (during recording).
• Green Flashing: Transferring data (connected to computer).

For a visual guide on LED indicators, please refer to the video below:

Video: Explains the meaning of different LED light patterns on the DrivePro Body 30.

Setup

Initial Power On and Buffering Mode

1. Press and hold the Power Button (center button) for approximately 3 seconds until you hear one beep. The Recording Indicator will blink blue, indicating buffering mode is starting up.
2. Once the Recording Indicator turns solid blue, buffering mode is activated. The camera is now ready to record.

App Connection (Wi-Fi & Bluetooth)

The DrivePro Body 30 supports both Bluetooth for basic setup and mode switching, and Wi-Fi for live streaming videos to iOS and Android devices via the DrivePro Body App.

Image: Smartphone displaying the DrivePro Body App connected to the camera.

1. Download the 'DrivePro Body App' from your device's app store (available for iOS and Android).
2. On the DrivePro Body 30, long press the Status Button (top left side) to enable Bluetooth pairing.
3. Open the DrivePro Body App on your smartphone and follow the on-screen instructions to connect to your camera via Bluetooth.
4. Once connected via Bluetooth, you can enable Wi-Fi through the app for live streaming and faster data transfer.

Operating Instructions

Recording Video

The DrivePro Body 30 features a buffering mode to capture events leading up to an activated recording.

1. Ensure the camera is powered on and in buffering mode (Recording Indicator is solid blue).
2. To start recording, quickly press the Power Button twice. You will hear two beeps, and the Recording Indicator will blink red continuously.
3. To stop recording and return to buffering mode, quickly press the Power Button twice again.
4. To power off the device from either buffering or recording mode, press and hold the Power Button until you hear one beep.

For a visual guide on recording videos, please refer to the video below:

Video: Demonstrates how to activate buffering mode, switch to recording, and power off the DrivePro Body 30.

Taking Snapshots

You can capture still images at any time while the camera is powered on.

1. With the camera powered on, briefly press the Snapshot Button (below the Power Button) once. You will hear one beep.
2. The image will be saved to the internal storage. Images captured with infrared LEDs active will be recorded in black and white.

Night Vision

The DrivePro Body 30 is equipped with four infrared LEDs for enhanced night vision.

Image: Back view of the DrivePro Body 30 showing the infrared LEDs.

• The infrared LEDs automatically activate in dim lighting conditions to improve recording quality in darkness.
• To manually toggle the Infrared LEDs On/Off, long press the Snapshot Button.
• Note that footage recorded with infrared LEDs will be in grayscale.

Stealth Mode and Silent Mode

The Assistive Button allows for discreet operation:

• Stealth Mode: Long press the Assistive Button to turn off the LED lamp and buzzer, reducing visibility and audible alerts.
• Silent Mode: Short press the Assistive Button to turn the microphone On/Off, allowing for video recording without audio.

Maintenance

Battery Care

The DrivePro Body 30 features a built-in Li-Polymer battery, providing up to 12 hours of continuous video recording on a single charge.

Image: Battery indicator showing different charge levels.

• Regularly charge the device using the provided 3.5mm to USB cable and adapter.
• Avoid fully discharging the battery frequently to prolong its lifespan.
• Store the camera in a cool, dry place when not in use.

Water and Dust Resistance

The DrivePro Body 30 is IP67 rated, offering full protection against dust and water ingress.

Image: DrivePro Body 30 demonstrating its water resistance.

• Ensure all ports are securely closed before exposing the device to water or dust.
• After exposure to water, clean and dry the product thoroughly before use. Liquid damage is not covered under warranty if proper care is not taken.
• The device also meets U.S. military drop-test standards for shock resistance.

Troubleshooting

• Device Not Responding: If the camera becomes unresponsive, simultaneously press the Power Button and Snapshot Button for 5 seconds to perform a device reset, format, and power off.
• Recording Issues: Ensure the device has sufficient battery charge and internal storage space. Check the LED indicators for status.
• Connectivity Problems: Verify that Bluetooth and Wi-Fi are enabled on both the camera and your mobile device. Ensure the DrivePro Body App is up to date.
• Poor Audio Quality: Check if Silent Mode (microphone off) is accidentally activated. Ensure the microphone port is clear of obstructions.

Specifications

Warranty and Support

Transcend products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official Transcend website or contact their customer service directly. Keep your purchase receipt for warranty claims.