Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Homelegance Appert Swivel Bar Stools. Please read this manual thoroughly before assembly and use to ensure safe and proper functionality.
The Homelegance Appert Swivel Bar Stools feature an industrial style design with a dark gray finished metal base and footrest. The seats and backs are upholstered in black bi-cast faux leather, providing comfort and durability. Each stool is equipped with a 360-degree swivel mechanism for ease of use.
Important Safety Information
WARNING:
- Always follow assembly instructions precisely for safe setup.
- Do not exceed the maximum weight limit of 250 pounds per stool. Overloading can lead to instability and injury.
- Exercise caution when using the 360-degree swivel mechanism to prevent tipping, especially when getting on or off the stool.
- Keep all small parts and packaging materials away from children and pets to prevent choking hazards.
- Regularly inspect all bolts and fasteners to ensure they remain tight. Retighten as necessary.
Product Overview
The Homelegance Appert Swivel Bar Stools are designed for counter height use and come as a set of two. Key features include:
- Industrial style design.
- Dark gray finished metal base with integrated footrest.
- Faux leather upholstered seat and back for comfort.
- 360-degree swivel mechanism for easy movement.
- Constructed with 100% Polyurethane fabric.
Figure 1: A pair of Homelegance Appert Swivel Bar Stools, showcasing their design and black upholstery.
Setup and Assembly
Your Homelegance Appert Swivel Bar Stools require assembly. The product ships in one box and includes all necessary components and hardware. It is recommended to assemble the stools on a soft, clean surface to prevent scratching.
Included Components:
- Seat and back Cushion (2 sets)
- Upper and lower leg sections (2 sets)
- Bottom Ring (2)
- Swivel plate (2)
- Hardware pack (bolts, washers, Allen wrench)
Please refer to the separate assembly instructions sheet included in the packaging for step-by-step visual guidance. Ensure all parts are present before beginning assembly.
Figure 2: Assembled bar stools, ready for use.
Operating Instructions
The Homelegance Appert Swivel Bar Stools are designed for simple operation.
Swivel Function:
Each stool is equipped with a 360-degree swivel mechanism located beneath the seat. To rotate, simply apply gentle pressure with your body while seated. Ensure the stool is on a stable, level surface before swiveling.
Avoid sudden or forceful movements when swiveling to maintain stability and prevent tipping. Do not stand on the stool or use it as a step ladder.
Maintenance
Proper care will extend the life and appearance of your bar stools.
- Cleaning: For general cleaning, wipe the faux leather seat and back with a damp cloth. For the metal frame, wipe with a dry cloth. Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish and upholstery.
- Spills: Immediately blot any spills with a clean, dry cloth. Do not rub, as this can spread the stain.
- Hardware: Periodically check all bolts and screws to ensure they are tight. Loose hardware can compromise the stability and safety of the stool. Retighten as needed using the provided Allen wrench or an appropriate tool.
- Placement: Avoid placing the stools in direct sunlight or near heat sources, which can cause the faux leather to fade or crack over time.
Troubleshooting
If you encounter any issues with your Homelegance Appert Swivel Bar Stools, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool feels wobbly or unstable. | Loose assembly hardware. Uneven floor surface. | Check and tighten all bolts and screws. Ensure the stool is on a flat, level surface. If the floor is uneven, consider using furniture pads or shims. |
| Swivel mechanism is stiff or noisy. | Lack of lubrication. Debris in the mechanism. | Apply a small amount of silicone-based lubricant to the swivel plate. Clean any visible debris from around the mechanism. |
| Faux leather upholstery appears creased or wrinkled. | Packaging compression. | Minor creases from packaging typically relax over time with use. Gentle warmth (e.g., from a hairdryer on low setting, held at a distance) can help, but test on an inconspicuous area first. |
If the problem persists after attempting these solutions, please contact Homelegance customer support.
Specifications
Detailed specifications for the Homelegance Appert Swivel Bar Stools (Model: 5566-24BK):
| Attribute | Detail |
|---|---|
| Product Dimensions (D x W x H) | 19"D x 20.5"W x 36.5"H |
| Color | Black |
| Brand | Homelegance |
| Size (Seat Height) | 25 in SH (25.5 Inches) |
| Style | Industrial |
| Furniture Finish | Black (Metal Frame) |
| Leg Style | Straight |
| Maximum Weight Recommendation | 250 Pounds |
| Assembly Required | Yes |
| Number of Pieces | 2 (Set of 2 Stools) |
| UPC | 782359554471 |
| Item Weight | 23 pounds (for the set) |
| Manufacturer | Home Elegance |
| Item Model Number | 5566-24BK |
| Fabric Type | 100% Polyurethane |
| Included Components | Bottom Ring, Hardware, Seat and back Cushion, Swivel plate, Upper and lower leg |
Figure 3: Dimensions of the Homelegance Appert Swivel Bar Stool.
Customer Support
For further assistance, parts replacement, or to report any issues not covered in this manual, please contact Homelegance customer support.
Refer to your purchase documentation or the Homelegance official website for the most current contact information.
When contacting support, please have your model number (5566-24BK) and UPC (782359554471) readily available.
