PuraFlame Alice 68 Inches

Download PDF
Contents

PuraFlame Alice 68-Inch Recessed Electric Fireplace Instruction Manual

Model: Alice 68 Inches | Brand: PuraFlame

1. Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your PuraFlame Alice 68-inch recessed electric fireplace. Please read all instructions carefully before installation and use, and retain this manual for future reference.

PuraFlame Alice 68-inch Recessed Electric Fireplace with realistic flame effect

Image 1: Front view of the PuraFlame Alice 68-inch recessed electric fireplace displaying a realistic flame effect.

2. Important Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.

  • Read all instructions before using this fireplace.
  • This fireplace is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the fireplace.
  • Extreme caution is necessary when any heater is used by or near children or invalids and whenever the fireplace is left operating and unattended.
  • Do not operate any fireplace with a damaged cord or plug or after the fireplace malfunctions, has been dropped or damaged in any manner.
  • Do not use outdoors.
  • Never locate fireplace where it may fall into a bathtub or other water container.
  • Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
  • To disconnect fireplace, turn controls to off, then remove plug from outlet.
  • Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the fireplace.
  • To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
  • All electrical wiring must be performed by a qualified electrician and in accordance with local codes.
  • Always use properly grounded, fused, and polarized outlets.

3. Package Contents

Carefully unpack all components from the box. Ensure all items listed below are present and undamaged.

  • Electric Firebox
  • Remote Handset
  • Owner's Manual
  • Log Set (decorative)
  • Crystal Stones (decorative)
  • Mounting Hardware
  • 2 AAA Batteries (for remote)
Contents of the PuraFlame Alice fireplace package including remote, logs, crystals, and hardware

Image 2: Contents of the package, showing the remote control, decorative log set, crystal stones, and mounting hardware.

4. Specifications

BrandPuraFlame
Model NameAlice 68 Inches Recessed Electric Fireplace
Product Dimensions (Overall)68 1/8" Width x 20 1/4" Height x 5 29/32" Depth (5.9"D x 68.12"W x 20.25"H)
Firebox Dimensions (without glass)62 1/2" Width x 18 1/32" Height x 5 11/16" Depth
Installation TypeBuilt-In / Recessed (for 2x6 stud wall)
Power SourceCorded Electric (110V outlet)
Heat Output1500W (High) / 750W (Low) - 5100 British Thermal Units
Heating CoverageUp to 68 square feet (supplemental heat)
Flame Effects4 settings (Yellow/Blue combinations)
Fuel Bed OptionsLog Set or Crystal Stones (13 LED colors)
ControlsTouch Screen Buttons, Remote Handset
Timer30 minutes to 9 hours
MaterialMetal, Glass
Item Weight125.2 Pounds
UPC842880115777

5. Installation

The PuraFlame Alice 68-inch electric fireplace is designed for in-wall recessed installation ONLY. It cannot be hung on a wall or used freestanding. It is specifically designed to fit a 2 x 6 inch stud wall.

5.1 Site Preparation

  • Ensure the chosen location has sufficient space and structural support for the fireplace's dimensions and weight.
  • The wall opening dimensions should be carefully measured to accommodate the firebox. Refer to the diagram below for precise measurements.
  • Maintain proper clearances from combustible materials as specified in the safety section.

5.2 Electrical Connection

Two electrical connection options are available:

  • Plug-in: Simply plug the fireplace into a standard 110V grounded outlet.
  • Hard-wiring: For a permanent installation, the unit can be hard-wired by a qualified electrician according to local electrical codes.

5.3 Mounting the Fireplace

Follow the detailed instructions provided in the included owner's manual for securing the fireplace into the prepared wall opening. Ensure the unit is level and securely fastened.

Diagram showing product dimensions, opening dimensions for recessed installation, and electrical connection options (plug-in or hard-wiring)

Image 3: Detailed diagram illustrating the product dimensions, required wall opening dimensions for recessed installation, and options for electrical connection (plug-in or hard-wiring).

6. Operation

Your PuraFlame Alice fireplace offers various settings for flame effects, heating, and fuel bed customization.

6.1 Flame Effects

The fireplace features ultra-high intensity LED lights to create a realistic flame effect. There are 4 distinct flame settings:

  1. Yellow with a subtle blue hue (low brightness)
  2. All yellow (standard brightness)
  3. Yellow with a subtle blue hue (standard brightness)
  4. All blue (standard brightness)

The flame effect can be operated independently of the heater, allowing for year-round ambiance.

Three views of the fireplace showing different flame colors: orange, mixed orange and blue, and pure blue, with air inlet and outlet indicators

Image 4: Visual representation of the three primary flame color options: orange, mixed orange and blue, and pure blue. Also indicates air inlet and outlet locations.

6.2 Fuel Bed Options

Customize the appearance of your fireplace with two included fuel bed options: a realistic log set or elegant crystal stones. The fuel bed also features 13 different LED lighting colors to enhance the ambiance.

Close-up views of the fireplace fuel bed showing options: a log set and crystal stones, with a color palette for LED lighting

Image 5: Close-up of the fuel bed, demonstrating the choice between a log set and crystal stones, along with a palette of 13 LED lighting colors for the fuel bed.

6.3 Heater Function

The fireplace includes an upper front heater blower with two heat settings:

  • High: 1500W
  • Low: 750W

The heater provides supplemental warmth and is not intended as a primary heat source. A thermostat allows you to control the room temperature, and a countdown timer can be set from 30 minutes to 9 hours for automatic shut-off.

6.4 Controls

The fireplace can be controlled using either the integrated touch screen buttons or the included remote handset.

Touch Buttons

The touch screen buttons are located on the unit's front panel. These buttons illuminate when active and will turn off after a few seconds of inactivity.

Close-up of the fireplace's touch control panel with illuminated buttons for flame, heat, and power

Image 6: Close-up view of the touch control panel on the fireplace, showing illuminated buttons for various functions.

Remote Handset

The remote control provides convenient access to all fireplace functions from a distance. It features an LCD display and dedicated buttons for flame effects, heater settings, temperature control, timer, and fuel bed lighting.

Remote control for the electric fireplace showing an LCD display and buttons for flame, heater, temperature, timer, and fuel bed settings

Image 7: The remote control unit, featuring an LCD display and clearly labeled buttons for adjusting flame effects, heater power, temperature, timer, and fuel bed lighting.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your electric fireplace.

  • Cleaning: Ensure the fireplace is turned off and unplugged before cleaning. Use a soft, damp cloth to clean the exterior surfaces. Do not use abrasive cleaners or sprays.
  • Air Vents: Periodically check and clean the air inlets and outlets to ensure they are free from dust and obstructions. Blocked vents can lead to overheating.
  • Internal Components: There are no user-serviceable parts inside the fireplace. Do not attempt to open the unit.
  • Storage: If storing the fireplace for an extended period, ensure it is clean, dry, and stored in a safe location.

8. Troubleshooting

If you experience issues with your fireplace, refer to the following common troubleshooting steps.

ProblemPossible CauseSolution
Fireplace does not turn on.No power, tripped circuit breaker, loose connection.Check power cord connection. Ensure outlet is functional. Reset circuit breaker if tripped.
No heat output.Heater turned off, thermostat setting too low, thermal cut-off activated.Ensure heater function is active. Increase thermostat setting. Allow unit to cool down if thermal cut-off engaged.
Remote control not working.Dead batteries, obstruction, remote out of range.Replace AAA batteries in the remote. Ensure no obstructions between remote and fireplace. Operate remote within specified range.
Flame effect is dim or flickering.LED issue, internal component.If issue persists after power cycling, contact customer support.

For issues not covered here, please contact PuraFlame customer support.

9. Warranty and Support

Your PuraFlame Alice electric fireplace comes with a Limited Warranty. Please refer to the warranty card included in your package or visit the official PuraFlame website for detailed terms and conditions.

For technical assistance, parts, or warranty claims, please contact PuraFlame customer support.

  • Customer Support: Refer to the contact information provided in your product packaging or on the official PuraFlame website.
  • Online Resources: Additional information and FAQs may be available on the PuraFlame brand store.

© 2024 PuraFlame. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.