KES Matte Black SUS304 Stainless Steel Wall Mount Toilet Paper Holder Instruction Manual

1. Product Overview

The KES Matte Black SUS304 Stainless Steel Wall Mount Toilet Paper Holder (Model A2175S12-BK) is designed for durability and ease of use in bathroom environments. Constructed from premium SUS304 stainless steel, it offers excellent resistance to rust and corrosion. Its single-arm design facilitates quick and easy roll changes, accommodating large and mega-sized toilet paper rolls. The holder can be installed either horizontally or vertically to suit various bathroom layouts.

Image 1.1: Front view of the KES Matte Black Toilet Paper Holder.

Image 1.2: The toilet paper holder shown with a standard roll of toilet paper.

Image 1.3: Detail highlighting the rust-resistant SUS304 stainless steel construction.

2. Specifications

Image 2.1: Dimensional diagram of the toilet paper holder.

3. Setup and Installation

The KES Toilet Paper Holder is designed for easy wall-mounted installation. All necessary mounting hardware is included in the package. The bracket requires two screws for secure attachment.

3.1. Tools Required (Not Included):

• Pencil
• Drill
• Drill bit appropriate for your wall type and anchors
• Hammer (for drywall anchors)
• Screwdriver

3.2. Installation Steps:

1. Choose Location: Select a suitable location on your bathroom wall. Ensure there is enough clearance for the toilet paper roll. The holder can be installed horizontally (opening to the left or right) or vertically (opening upwards).
2. Mark Drilling Points: Hold the mounting bracket against the wall at your desired installation point. Use a pencil to mark the positions for the two screw holes.
3. Drill Pilot Holes: Using an appropriate drill bit, drill pilot holes at the marked locations. If installing into drywall, insert the provided wall anchors into the pilot holes and tap gently with a hammer until flush with the wall surface.
4. Attach Mounting Bracket: Align the mounting bracket with the drilled holes. Insert the screws through the bracket and into the wall anchors (or directly into studs if applicable). Tighten the screws securely. The bracket features oval holes to allow for minor adjustments and ensure a tight fit.
5. Secure Holder to Bracket: Place the toilet paper holder onto the mounted bracket. There will be a small set screw on the underside of the holder's base. Use the provided Allen wrench to tighten this set screw, securing the holder firmly to the bracket.

Image 3.1: Illustration of the dual lock design, preventing droop and ensuring a secure mount.

4. Operating Instructions

This single-arm toilet paper holder is designed for convenient and quick roll changes.

4.1. Changing the Toilet Paper Roll:

1. Simply slide the empty toilet paper roll off the holder arm.
2. Slide a new toilet paper roll onto the holder arm.
3. The large knob at the end of the arm prevents the roll from accidentally falling off during use.

5. Care and Maintenance

To ensure the longevity and appearance of your KES toilet paper holder, follow these simple maintenance guidelines:

• Cleaning: Clean regularly with a soft, damp cloth. For stubborn spots, a mild soap solution can be used.
• Avoid Harsh Cleaners: Do not use abrasive cleaners, scouring pads, or chemical solvents, as these can damage the matte black finish and stainless steel.
• Drying: After cleaning, wipe the holder dry with a soft cloth to prevent water spots, especially in humid environments.
• Rust Resistance: The SUS304 stainless steel construction is inherently rust-resistant, making it suitable for bathrooms and kitchens. Proper drying after exposure to moisture will further maintain its condition.

6. Troubleshooting

If you encounter any issues with your toilet paper holder, consider the following common solutions:

• Holder Feels Loose: If the holder feels wobbly, check the set screw on the underside of the base and tighten it with the Allen wrench. Also, verify that the mounting screws securing the bracket to the wall are tight. Ensure appropriate wall anchors were used for your wall type during installation.
• Toilet Paper Roll Does Not Turn Freely: Ensure the toilet paper roll is correctly seated on the arm and not obstructed by the wall or any other object. Verify that the roll's diameter is within the specified limits (Max. 4.7 inches).
• Roll Falls Off Easily: The holder is designed with a knob at the end to prevent rolls from falling. Ensure the roll is fully pushed onto the arm. If the issue persists, check for any damage to the knob or arm.

7. Warranty and Support

The KES Matte Black SUS304 Stainless Steel Wall Mount Toilet Paper Holder comes with a One Year Manufacturer's Warranty.

For warranty claims, technical assistance, or any product-related inquiries, please contact KES customer support through their official website or the retailer where the product was purchased. Please have your model number (A2175S12-BK) and proof of purchase available when contacting support.