Introduction
Thank you for choosing the SONGMICS Double Watch Winder UJWW11RD. This device is designed to keep your automatic watches wound and ready to wear, ensuring their accuracy and longevity. Please read this manual carefully before use to ensure proper operation and maintenance.
Safety Instructions
- Do not expose the watch winder to direct sunlight, high temperatures, or high humidity.
- Avoid placing the unit near strong magnetic fields.
- Use only the provided AC adapter.
- Keep out of reach of children.
- Do not attempt to disassemble or repair the unit yourself. Contact customer support if issues arise.
- Ensure the unit is placed on a stable, level surface.
Package Contents
- 1 x SONGMICS Double Watch Winder UJWW11RD
- 1 x AC Power Adapter
- 1 x Instruction Manual
Product Overview
The SONGMICS Double Watch Winder UJWW11RD features a sleek design with a clear viewing window, allowing you to display your watches while they are being wound. It is equipped with a quiet Japanese Mabuchi motor for silent operation.
Image 1: Front view of the watch winder, showcasing its elegant design and the two watch slots. The clear top allows for easy viewing of the watches.
Image 2: A detailed view of two automatic watches securely placed on the rotating cushions within the winder. The cushions are designed to hold various watch sizes.
Image 3: This image illustrates the dimensions of the watch winder, including its height, width, and depth, providing a clear understanding of its physical size.
Setup
- Placement: Place the watch winder on a flat, stable surface away from direct sunlight and moisture.
- Insert Watches: Carefully place your automatic watches onto the rotating cushions. Ensure they are securely fitted.
Image 4: A user demonstrating the correct way to place an automatic watch onto the winder's cushion. Ensure the watch is snug to prevent movement during rotation.
- Power Connection: The winder can be powered by either the included AC adapter or 2 x 1.5V batteries (not included).
- AC Adapter: Connect the AC adapter to the power port on the back of the winder and plug it into a standard electrical outlet.
- Batteries: Open the battery compartment on the bottom of the unit and insert two 1.5V batteries, observing polarity.
Image 5: This image highlights the dual power supply options for the watch winder, showing the input for the 100-240V AC adapter and the compartment for two 1.5V batteries.
Operating Instructions
Once powered, the watch winder will begin its rotation cycle automatically. The UJWW11RD model operates with a single, pre-programmed rotation mode designed to keep most automatic watches wound. It typically alternates rotation directions (clockwise and counter-clockwise) throughout the day to ensure optimal winding.
Image 6: The watch winder positioned on a nightstand, demonstrating its compact size and quiet operation, which allows it to be placed in a bedroom without disturbing sleep.
Video 1: This video demonstrates the watch winder in operation, showing the smooth and quiet rotation of the watches. It highlights the ease of use and the continuous winding action.
Maintenance
- Cleaning: Wipe the exterior of the winder with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Interior: Gently dust the interior with a soft brush or cloth.
- Watch Cushions: The watch cushions can be wiped with a slightly damp cloth if necessary, then allowed to air dry completely before re-use.
- Long-Term Storage: If storing the winder for an extended period, remove any batteries and disconnect the AC adapter.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Winder is not rotating. | No power, loose connection, or depleted batteries. | Check AC adapter connection. If using batteries, replace them. Ensure the power switch (if present) is on. |
| Unusual noise during operation. | Watch not seated correctly, foreign object, or motor issue. | Ensure watches are properly seated. Check for any obstructions. If noise persists, contact customer support. |
| Watches are not fully wound. | Watch requires a specific TPD (Turns Per Day) or winding direction not met by the winder's default program. | Consult your watch manufacturer's specifications for optimal TPD and winding direction. This winder has a fixed program. |
Specifications
- Model Number: UJWW11RD
- Product Dimensions: 7 x 7 x 7.8 inches
- Item Weight: 4.4 pounds
- Power Supply: 100-240V AC Adapter (included) or 2 x 1.5V Batteries (not included)
- Motor Type: Japanese Mabuchi Motor
- Capacity: 2 Automatic Watches
Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official SONGMICS website. Please have your model number (UJWW11RD) and purchase date available when contacting support.
