RYGHT Juggo 2 Bluetooth Speaker

Introduction

Thank you for choosing the RYGHT Juggo 2 Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it carefully before use and retain it for future reference.

The Juggo 2 is a compact, elegant, and portable wireless speaker designed to deliver clear and balanced sound with powerful bass. Its robust, soft-touch coating and IPX6 splash protection make it suitable for various environments. Enjoy up to 10 hours of music playback on a single charge and hands-free calling with the integrated microphone.

Important Safety Information

• Do not expose the speaker to extreme temperatures, direct sunlight, or fire.
• Do not immerse the speaker in water, despite its splash-proof design.
• Avoid dropping or subjecting the speaker to strong impacts.
• Do not attempt to disassemble, repair, or modify the speaker yourself. Contact qualified service personnel.
• Use only the provided charging cable or a certified equivalent.
• Keep out of reach of children.
• Dispose of the battery and speaker responsibly according to local regulations.

Package Contents

Ensure all items are present in the box:

• RYGHT Juggo 2 Bluetooth Speaker
• USB Charging Cable
• 3.5mm Audio Cable (Mini Jack)
• User Manual (this document)

Product Overview

Familiarize yourself with the speaker's components and controls.

Image 1: RYGHT Juggo 2 Bluetooth Speaker (example in blue) in vertical orientation, highlighting the control panel on the side and the top/bottom design. This image shows the speaker's general appearance and button layout.

Controls and Ports

1. Power Button: Press and hold to turn the speaker On/Off.
2. Volume Up / Next Track Button (▲):
   • Short press: Increase volume.
   • Long press: Skip to the next track.
3. Play/Pause / Call Button (⬢):
   • Short press: Play/Pause music.
   • Short press (during call): Answer/End call.
   • Long press (during call): Reject call.
4. Volume Down / Previous Track Button (▼):
   • Short press: Decrease volume.
   • Long press: Go to the previous track.
5. LED Indicator: Shows power and Bluetooth status.
6. Microphone: For hands-free calls.
7. USB Charging Port: For charging the speaker's internal battery.
8. 3.5mm AUX Input: For wired audio connection.

Setup

1. Charging the Speaker

Before first use, fully charge the speaker. A full charge takes approximately 4 hours.

1. Locate the USB charging port, usually protected by a rubber flap for water resistance.
2. Connect the small end of the provided USB charging cable to the speaker's USB port.
3. Connect the larger end of the USB cable to a USB power adapter (not included) or a computer's USB port.
4. The LED indicator will illuminate during charging and turn off or change color when fully charged.
5. Once charging is complete, disconnect the cable and ensure the rubber flap is securely closed to maintain water resistance.

2. Bluetooth Pairing

Pair your RYGHT Juggo 2 speaker with your Bluetooth-enabled device (smartphone, tablet, laptop) to enjoy wireless audio.

1. Power On: Press and hold the Power button until you hear an audible prompt or the LED indicator starts flashing. The LED will typically flash blue, indicating it's in pairing mode.
2. Activate Bluetooth on Your Device: Go to your device's Bluetooth settings and ensure Bluetooth is turned on.
3. Search for Devices: Your device will scan for available Bluetooth devices.
4. Select "RYGHT Juggo 2": From the list of found devices, select "RYGHT Juggo 2" to initiate pairing.
5. Confirm Pairing: Once successfully paired, you will hear a confirmation tone, and the LED indicator on the speaker will turn solid blue.

Note: The speaker has a stable connection range of up to 10 meters (33 feet) without obstacles.

Operating Instructions

Power On/Off

• To Power On: Press and hold the Power button for approximately 3 seconds. The LED indicator will light up.
• To Power Off: Press and hold the Power button for approximately 3 seconds. The LED indicator will turn off.

Music Playback (Bluetooth Mode)

• Play/Pause: Short press the Play/Pause button (⬢).
• Volume Up: Short press the Volume Up button (▲).
• Volume Down: Short press the Volume Down button (▼).
• Next Track: Long press the Volume Up button (▲).
• Previous Track: Long press the Volume Down button (▼).

Hands-Free Calling

With the integrated microphone, you can manage calls directly from the speaker when connected via Bluetooth.

• Answer Call: Short press the Play/Pause/Call button (⬢) when an incoming call rings.
• End Call: Short press the Play/Pause/Call button (⬢) during a call.
• Reject Call: Long press the Play/Pause/Call button (⬢) when an incoming call rings.

Wired Connection (AUX Mode)

For devices without Bluetooth, or if you prefer a wired connection, use the 3.5mm AUX input.

1. Ensure the speaker is powered on.
2. Connect one end of the 3.5mm audio cable to the speaker's AUX input port (under the rubber flap).
3. Connect the other end of the 3.5mm audio cable to the headphone jack or audio output of your device.
4. The speaker will automatically switch to AUX mode. Control playback and volume from your connected device.

Maintenance

• Cleaning: Wipe the speaker with a soft, dry cloth. Do not use abrasive cleaners, alcohol, or chemical solvents.
• Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
• Water Resistance: Always ensure the rubber flaps covering the charging and AUX ports are securely closed to maintain the IPX6 splash protection.
• Battery Care: To prolong battery life, avoid fully discharging the speaker frequently. Charge it regularly, even if not in use for extended periods.

Troubleshooting

Specifications

Warranty and Support

RYGHT products are designed with quality and reliability in mind. This product comes with a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included in your package or visit the official RYGHT website.

If you encounter any issues or have questions regarding your RYGHT Juggo 2 Bluetooth Speaker, please contact RYGHT customer support through their official website or the retailer where you purchased the product. Please have your model number (Juggo 2, R482952/R482969) and proof of purchase ready.