1. Introduction
This manual provides comprehensive instructions for the proper installation, operation, and maintenance of the CELLSTAR GDO-14 GPS Unit. The GDO-14 is designed to enhance compatible CELLSTAR drive recorders, specifically the CSD-690FHR model, by adding GPS information and driving speed data to recorded video footage.
Please read this manual thoroughly before using the product to ensure correct usage and optimal performance.
Figure 1: CELLSTAR GDO-14 GPS Unit. This image shows the compact black GPS unit with its attached cable and 3.5mm jack connector.
2. Safety Information
- Ensure the unit is securely installed to prevent it from obstructing the driver's view or interfering with vehicle operation.
- Do not attempt to disassemble or modify the unit. This may cause malfunction and void the warranty.
- Keep the unit away from water, moisture, and extreme temperatures.
- Clean the unit with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Always refer to the drive recorder's instruction manual for specific compatibility and connection details.
3. Package Contents
Please check that all items are present in the package:
- CELLSTAR GDO-14 GPS Unit
- Double-sided adhesive tape for mounting
- Instruction Manual (this document)
4. Setup and Installation
Follow these steps to properly install your GDO-14 GPS Unit:
4.1 Connecting the GPS Unit to the Drive Recorder
Locate the GPS connection terminal on your drive recorder (e.g., CELLSTAR CSD-690FHR). The terminal is typically a 3.5mm jack.
Insert the plug of the GDO-14 GPS unit firmly into the GPS connection terminal of the drive recorder.
Figure 2: Illustration showing the GPS unit's plug being inserted into the GPS connection terminal on a drive recorder. Note that the drive recorder's appearance may vary by model.
4.2 Mounting the GPS Unit
Attach the GPS unit to the camera mount base of your drive recorder. Ensure it is securely fastened.
Figure 3: Illustration demonstrating the attachment of the GPS unit to the drive recorder's camera mount base, and its subsequent placement on the front windshield using double-sided tape.
Apply the provided double-sided adhesive tape to the GPS unit. Before attaching, thoroughly clean any oil or dirt from the mounting surface on the front glass to ensure a strong bond.
Install the GPS unit securely on the front glass, ensuring it has a clear view of the sky for optimal GPS signal reception. The unit does not have a specific orientation, but it should be placed where it can receive a signal.
Refer to the drive recorder's instruction manual for detailed instructions on how to use the GPS unit in conjunction with the recorder.
Important Notes on Use:
- The GPS unit does not have a specific orientation; place it in a location where it can receive a GPS signal.
- For detailed usage instructions, please consult the instruction manual of your main drive recorder unit.
- Before attaching the GPS unit, ensure the double-sided tape application area is clean and free of oil or dirt for secure installation.
5. Operating Instructions
Once the GDO-14 GPS Unit is correctly installed and connected to your compatible CELLSTAR drive recorder (CSD-690FHR), it will automatically begin to function.
- GPS Information Recording: The unit will acquire GPS satellite signals and embed location data (latitude, longitude) into your drive recorder's video recordings. This allows you to review your travel route in conjunction with the video footage.
- Driving Speed Information: In addition to location, the GDO-14 will also record your driving speed, integrating this data into the video files. This provides a comprehensive record of your journey.
- Time Synchronization: The GPS unit also helps in synchronizing the drive recorder's internal clock with accurate satellite time, ensuring precise timestamps on all recordings.
For specific settings related to GPS data display or playback on your drive recorder, please refer to the drive recorder's own instruction manual.
6. Maintenance
- Cleaning: Use a soft, dry cloth to gently wipe the exterior of the GPS unit. Do not use liquid cleaners, solvents, or abrasive materials, as these can damage the unit.
- Connection Check: Periodically check that the GPS unit's plug is securely connected to the drive recorder's terminal.
- Mounting Check: Ensure the double-sided tape is still firmly holding the GPS unit in place. If it becomes loose, re-secure it with new adhesive tape after cleaning the surface.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No GPS signal / GPS data not recorded |
|
|
| Inaccurate speed/location data |
|
|
If you continue to experience issues, please refer to the troubleshooting section of your drive recorder's manual or contact CELLSTAR customer support.
8. Specifications
| Model Name | GDO-14 |
| Brand | CELLSTAR |
| Compatible Drive Recorder | CSD-690FHR (and other compatible models as specified by CELLSTAR) |
| Product Dimensions | 4 x 4.8 x 1.67 cm |
| Item Weight | 24 g (0.02 Kilograms) |
| Connectivity | Wired (via 3.5mm jack to drive recorder) |
| Features | Adds GPS information to video recording, Adds driving speed information to video recording |
9. Warranty and Support
For warranty information, please refer to the documentation provided with your CELLSTAR drive recorder or visit the official CELLSTAR website. The GDO-14 GPS Unit's warranty is typically covered under the main drive recorder's warranty period.
If you require technical assistance or have questions not covered in this manual, please contact CELLSTAR customer support through their official channels. When contacting support, please have your product model (GDO-14) and your drive recorder model (CSD-690FHR) readily available.
Official CELLSTAR Website: www.cellstar.co.jp (Please note: this link is for informational purposes and may lead to a Japanese website.)