Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your KidKraft Annabelle Wooden Dolls House, Model 65934. Please read all instructions carefully before assembly and use to ensure safe and enjoyable play.
Product Overview
The KidKraft Annabelle Dolls House is a multi-level wooden play set designed for 12-inch fashion dolls. It features three floors, four distinct rooms, a balcony, and a functional gliding elevator. The set includes 17 pieces of furniture and accessories to enhance imaginative play.
Safety Information
- This product is intended for domestic use only.
- Adult assembly is required.
- Ensure all fasteners are securely tightened before use. Periodically check and re-tighten as needed.
- Keep small parts away from young children during assembly to prevent choking hazards.
- Recommended for ages 36 months to 8 years.
What's in the Box
Please verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Annabelle Wooden Dollhouse structure components
- Gliding Elevator mechanism
- 17-piece furniture and accessory set
- Hardware pack (screws, connectors, etc.)
- Assembly instructions booklet

Image: The 17-piece furniture and accessory set, including a bed, piano, sofa, dining table with chairs, and bathroom fixtures.
Setup and Assembly
The KidKraft Annabelle Dolls House is designed for straightforward assembly. Follow the step-by-step instructions provided in the separate assembly booklet included with your product. It is recommended to assemble the dollhouse in the area where it will be used due to its size.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Verify all parts against the parts list in the assembly booklet.
- Follow Step-by-Step Instructions: Refer to the detailed diagrams and instructions in the assembly booklet. Each step is numbered and illustrates which parts and hardware are needed.
- Secure Fasteners: Ensure all screws and connectors are tightened firmly but do not overtighten to avoid damaging the wood.
- Install Elevator: Follow the specific instructions for installing the gliding elevator mechanism to ensure smooth operation.
- Place Furniture: Once the main structure is complete, arrange the 17 furniture pieces within the rooms and balcony as desired.

Image: The assembled KidKraft Annabelle Dolls House with its overall dimensions indicated.
Operating Instructions
The Annabelle Dolls House offers various interactive features for engaging play.
Using the Gliding Elevator
- The elevator is manually operated. Gently slide the elevator car up or down the track to move dolls between the first and second floors.
- Avoid forcing the elevator if it encounters resistance. Ensure no objects are obstructing its path.

Image: A child demonstrating the use of the dollhouse elevator.
Arranging Furniture and Accessories
- The included 17 pieces of furniture can be freely arranged and rearranged within the dollhouse rooms and balcony.
- Encourage creative placement to design different room layouts and play scenarios.

Image: A child engaging in imaginative play with dolls and furniture inside the dollhouse.
Balcony Play
- The dollhouse features a balcony area for additional play possibilities.
- Dolls can be placed on the balcony for outdoor scenes or to interact with other areas of the house.

Image: A child interacting with a doll on the dollhouse balcony.
Care and Maintenance
Proper care will help maintain the longevity and appearance of your dollhouse.
- Cleaning: Wipe surfaces with a damp cloth and mild soap if necessary. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
- Dusting: Regularly dust the dollhouse and furniture with a soft, dry cloth.
- Inspection: Periodically inspect all parts for wear and tear, especially fasteners. Re-tighten any loose screws to ensure stability.
- Storage: Store the dollhouse in a dry environment, away from direct sunlight or extreme temperatures, which can cause warping or fading.
Troubleshooting
If you encounter any issues with your KidKraft Annabelle Dolls House, please refer to the following common solutions.
- Missing Parts: If any parts were missing upon unboxing, refer to the parts list in your assembly booklet and contact KidKraft customer support for replacements.
- Assembly Difficulties: Double-check the assembly instructions and diagrams. Ensure all pieces are oriented correctly and that the correct hardware is used for each step.
- Wobbly Structure: Ensure all screws and fasteners are fully tightened. If the issue persists, disassemble and reassemble the affected section, paying close attention to alignment.
- Elevator Not Gliding Smoothly: Check for any obstructions in the elevator track. Ensure the elevator car is correctly seated on its runners.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions (L x W x H) | 32.6 x 16 x 47.5 inches (82.87 x 40.32 x 120.33 cm) |
| Item Weight | 31.9 pounds (14.47 kg) |
| Model Number | 65934 |
| Manufacturer | KidKraft |
| Recommended Age | 36 months - 8 years |
| Materials | MDF, Plastic |
| Included Accessories | 17-piece furniture set, Gliding Elevator |
Warranty Information
Specific warranty details for the KidKraft Annabelle Wooden Dolls House are not provided in this document. For information regarding product warranty, including terms, conditions, and how to make a claim, please refer to the warranty card included with your purchase or visit the official KidKraft website.
Customer Support
If you require further assistance, have questions about assembly, or need replacement parts, please contact KidKraft customer support directly.
- Online Support: Visit the official KidKraft website for FAQs, assembly videos, and contact forms.
- Contact Information: Refer to the packaging or the KidKraft website for the most current customer service phone numbers and email addresses.





