Nerf E1911

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Nerf Delta Trooper Combat Blaster Instruction Manual

Model: E1911

Introduction

The Nerf Delta Trooper Combat Blaster is a dart blaster designed for active play. This manual provides essential information for the safe and effective use of your blaster, including assembly, loading, firing, and maintenance procedures. Please read all instructions carefully before use.

Recommended Age: 8 years and up.

Fully assembled Nerf Delta Trooper Combat Blaster with stock and barrel extension.

Image: The Nerf Delta Trooper Combat Blaster shown fully assembled with its modular stock and barrel extension.

What's in the Box

Verify that all components are present before beginning assembly.

  • Nerf Delta Trooper Blaster
  • 12-Dart Magazine (Clip)
  • Elite Darts
  • Stock Attachment
  • Barrel Extension
Nerf Delta Trooper Blaster in its packaging, showing the blaster, darts, and attachments.

Image: Nerf Delta Trooper Blaster packaging, illustrating the included blaster, darts, and modular attachments.

Assembly and Setup

1. Attach the Stock

  1. Align the stock attachment with the rear of the blaster body.
  2. Push firmly until it clicks into place.
A person attaching the stock to the rear of the Nerf Delta Trooper blaster.

Image: Demonstrating how to attach the stock component to the main blaster body.

2. Attach the Barrel Extension

  1. Align the barrel extension with the front of the blaster.
  2. Twist or push until it locks securely.

Note: The blaster can be used without the stock or barrel extension for a more compact configuration.

The Nerf Delta Trooper blaster showing various attachment points for customization.

Image: The blaster highlighting its built-in attachment points for modular components like the stock and barrel.

3. Load the Magazine

  1. Insert Elite darts into the 12-dart magazine, ensuring they are fully seated.
  2. Do not use damaged or crushed darts, as this can cause jamming.
A hand holding a 12-dart magazine, ready to be loaded with darts.

Image: A 12-dart magazine being held, ready for dart loading.

4. Insert the Magazine into the Blaster

  1. Ensure the priming slide (on top of the blaster) is pulled back to the rear position.
  2. Insert the loaded magazine firmly into the magazine well until it clicks.
  3. Slide the priming slide forward to chamber the first dart.
A person inserting a loaded 12-dart magazine into the Nerf Delta Trooper blaster.

Image: A person inserting a loaded 12-dart magazine into the blaster's magazine well.

Operating Instructions

Single-Shot Firing

  1. With a loaded magazine inserted and the priming slide forward, aim the blaster.
  2. Pull the priming slide back completely and then push it forward to chamber a dart.
  3. Pull the trigger to fire one dart.
  4. Repeat steps 2 and 3 for subsequent shots.

Slam-Fire Function

The Delta Trooper features a slam-fire function for rapid dart firing.

  1. Hold down the trigger.
  2. Rapidly pull the priming slide back and push it forward repeatedly. This will fire darts continuously as long as the trigger is held and the blaster is primed.

Video: Demonstration of the Nerf Delta Trooper blaster's operation, including priming, firing, and magazine reloading.

Magazine Removal

  1. Pull the priming slide back to the rear position.
  2. Press the magazine release button (located on both sides of the magazine well).
  3. Remove the magazine.

Maintenance

  • Dart Care: Always use official Nerf Elite darts. Avoid using damaged, bent, or crushed darts, as these can impair performance and cause jams.
  • Cleaning: Wipe the blaster with a damp cloth to remove dirt and debris. Do not submerge the blaster in water or use harsh chemicals.
  • Storage: Store the blaster and darts in a cool, dry place away from direct sunlight.

Troubleshooting

Blaster Not Firing or Jamming

  • Check Darts: Ensure darts are not damaged, bent, or crushed. Replace any compromised darts.
  • Magazine Seating: Verify the magazine is fully inserted and clicked into place.
  • Priming Slide: Make sure the priming slide is pulled back completely and then pushed fully forward. Incomplete priming can prevent firing.
  • Jam Access Door: If a dart is visibly jammed, open the jam access door (usually located on the side of the blaster) and carefully remove the obstruction. Close the door securely before attempting to fire again.
  • Lock-Release Lever: If the blaster mechanism feels stuck, locate the small lock-release lever (often near the trigger) and press it to reset the internal mechanism.

Specifications

Product Name Nerf Delta Trooper Combat Blaster
Model Number E1911
Brand Nerf
Manufacturer Hasbro
Product Dimensions 2.63 x 20 x 11.75 inches
Item Weight 0.039 ounces
Recommended Age 8 years and up
Release Date August 1, 2018
Nerf Delta Trooper blaster with a white arrow indicating its total length of 27.6 inches (70 cm).

Image: The Nerf Delta Trooper blaster displaying its overall length of 27.6 inches (70 cm).

Warranty and Support

Specific warranty information for this product is not detailed in the provided data. For warranty claims, product support, or further assistance, please refer to the official Nerf or Hasbro customer service channels.

You can visit the official Nerf store for more information: Nerf Official Store

© 2023 Nerf / Hasbro. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.