UPBRIGHT 12V 2A AC/DC Adapter

UPBRIGHT 12V AC/DC Adapter User Manual

For Jumper EZpad JP11, EZpad 6, EZpad 6s Pro 2-in-1 11.6 inch Tablets

1. Introduction

Thank you for choosing the UPBRIGHT 12V AC/DC Adapter. This power supply is designed to provide reliable and efficient power to your compatible Jumper EZpad tablets. Please read this manual carefully before using the adapter to ensure proper operation and safety.

2. Important Safety Information

  • Use this adapter only with devices that require 12V DC input and a maximum of 2A current. Using it with incompatible devices may cause damage.
  • Ensure the adapter is connected to a properly grounded electrical outlet.
  • Do not expose the adapter to water, moisture, or extreme temperatures.
  • Avoid dropping or subjecting the adapter to strong impacts.
  • Do not attempt to open or modify the adapter. Refer all servicing to qualified personnel.
  • Unplug the adapter from the power outlet when not in use for extended periods.
  • Keep out of reach of children.

3. Package Contents

Verify that your package contains the following items:

  • 1 x UPBRIGHT 12V AC/DC Adapter

Note: The product listing may indicate '2 x AC Adapter' in some regions; however, standard packaging typically includes one adapter unit.

4. Specifications

BrandUPBRIGHT
Input Voltage100-240VAC, 50/60Hz
Output Voltage12V DC
Current Rating2A
Wattage24W
Connector TypeBarrel Connector (DC Barrel)
Compatible DevicesJumper EZpad JP11, Jumper EZpad 6, Jumper EZpad 6s Pro, Jumper EZpad Apollo Lake E3950 11.6 inch Tablets
Protection FeaturesOVP (Over Voltage Protection), OCP (Over Current Protection), SCP (Short Circuit Protection)
Main Power Connector Type2 Pin (US Standard)
PortabilityYes
Mounting TypeWall Mount

5. Setup Instructions

  1. Inspect the Adapter: Before use, visually inspect the adapter and its cable for any signs of damage. Do not use if damaged.
  2. Connect to Device: Insert the barrel connector end of the adapter cable into the DC input port of your Jumper EZpad tablet. Ensure a snug fit.
  3. Connect to Power Outlet: Plug the AC prongs of the adapter into a standard 100-240V AC wall outlet.
  4. Verify Connection: Your tablet should indicate that it is receiving power or charging.
UPBRIGHT 12V AC/DC Adapter with cable and barrel connector

Image 1: The UPBRIGHT 12V AC/DC Adapter, showing the main unit with integrated cable and barrel connector.

6. Operating Instructions

Once connected, the adapter will automatically supply power to your tablet and charge its battery. No further user interaction is typically required for basic operation.

  • The adapter is designed for continuous use within its specified voltage and current limits.
  • It features built-in protection mechanisms (OVP, OCP, SCP) to safeguard both the adapter and your device from electrical anomalies.
  • For international use, ensure you have the correct regional plug adapter if the provided unit is not compatible with your local outlets.
Image showing various international plug adapters (AU, EU, UK) and a warranty certificate

Image 2: Example of international plug adapters (AU, EU, UK) that may be included with international orders, alongside a warranty certificate.

7. Maintenance

  • Cleaning: Disconnect the adapter from both the power outlet and your device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
  • Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly winding the cable to prevent damage.
  • Cable Care: Do not bend, twist, or pull the cable excessively, especially near the connectors, as this can cause internal damage.

8. Troubleshooting

ProblemPossible CauseSolution
Tablet not charging/receiving power.
  • Adapter not properly plugged into outlet.
  • Adapter not properly connected to tablet.
  • Faulty power outlet.
  • Incompatible adapter (wrong voltage/current).
  • Damaged adapter or cable.
  • Ensure adapter is securely plugged into a working wall outlet.
  • Verify the barrel connector is fully inserted into the tablet's DC input.
  • Test the outlet with another device.
  • Confirm your tablet requires 12V DC and 2A. This adapter is NOT for 5V devices.
  • Inspect adapter and cable for damage. If damaged, discontinue use and replace.
Adapter feels warm during use.Normal operation.A slight warmth is normal during operation. If the adapter becomes excessively hot to touch or emits a burning smell, unplug it immediately and discontinue use.

9. Warranty and Support

This UPBRIGHT product comes with a warranty to ensure your satisfaction and product reliability.

  • Warranty Period: 30 Days Refund - 24 Months Exchange.
  • Claiming Warranty: For warranty claims or technical support, please contact UPBRIGHT customer service through your original point of purchase or visit the official UPBRIGHT store page.

Please retain your proof of purchase for warranty service.

Related Documents - 12V 2A AC/DC Adapter

Preview UpBright Power Adapter User Manual
User manual for the UpBright power adapter, covering product features, usage instructions, safety precautions, maintenance, and troubleshooting.
Preview Diamond Systems Saturn SBC: User Manual for Intel Apollo Lake E3950
Comprehensive user manual for the Diamond Systems Saturn rugged PCIe/104 Single Board Computer featuring the Intel Apollo Lake E3950 processor, detailing features, specifications, and operation.
Preview OnLogic IGN200 Embedded Computer Product Manual
Comprehensive product manual for the OnLogic IGN200 embedded computer, detailing specifications, I/O, mounting instructions, microcontroller features, and power management.
Preview EmNANO-i2408 COM Express Mini Type 10 CPU Module Quick Installation Guide
Quick installation guide for the ARBOR EmNANO-i2408, an ultra-small COM Express® Mini Type 10 CPU module, detailing specifications, features, and technical support.
Preview iBASE MPPC1001PC & MPPC1501PC Industrial Panel PC User Manual
Comprehensive user manual for the iBASE MPPC1001PC and MPPC1501PC Industrial Panel PCs, detailing specifications, hardware installation, driver installation, BIOS configuration, and safety information.
Preview Lanner V3S User Manual: Vehicle Computing Rugged Platforms
Comprehensive user manual for the Lanner V3S, a fanless, rugged vehicle computing platform designed for video surveillance, recording, and analytics. Covers system specifications, hardware setup, safety, and compliances.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.