Homedics Shiatsu Flex Ankle & Foot Massager with Heat - Instruction Manual

Introduction

Thank you for purchasing the Homedics Shiatsu Flex Ankle & Foot Massager with Heat. This manual provides important information for the safe and effective use of your device. Please read it thoroughly before operation and retain it for future reference.

This massager is designed to provide a soothing foot massage with three massage styles and two unique massage modes. It features deep kneading shiatsu, rhythmic air compression, and an optional heat function. The device can also be controlled via a smartphone application for customized massage programs.

The Homedics Shiatsu Flex Ankle & Foot Massager with Heat, featuring two foot compartments and a central control panel.

Important Safeguards

When using electrical products, basic precautions should always be followed, including the following:

• Always unplug the appliance from the electrical outlet immediately after using and before cleaning.
• Do not use while bathing or in a shower.
• Do not place or store appliance where it can fall or be pulled into a tub or sink.
• Do not place in or drop into water or other liquid.
• Never use pins or other metallic fasteners with this appliance.
• Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons.
• Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by Homedics.
• Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return it to a Homedics Service Center for examination and repair.
• Keep cord away from heated surfaces.
• Never use while sleeping or drowsy.
• Never drop or insert any object into any opening.
• Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
• Do not use on or near eyes or other highly sensitive areas.
• Do not operate under a blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons.
• Do not carry this appliance by supply cord or use cord as a handle.
• To disconnect, turn all controls to the “OFF” position, then remove plug from outlet.
• This appliance is designed for household use only.
• This appliance is not intended for medical use. It is intended only to provide a luxurious massage.
• Consult your doctor before using this product if you have any medical conditions, including pregnancy, pacemaker use, or any concerns regarding your health.
• The recommended usage time should not be exceeded.

Getting Started (Setup)

1. Unpack the Massager: Carefully remove the massager from its packaging and inspect it for any damage.
2. Placement: Place the massager on a flat, stable surface in a comfortable seating area. Ensure the power cord can reach an electrical outlet without being strained.
3. Power Connection: Plug the power adapter into the massager's power port, then plug the other end into a standard electrical outlet.
4. Prepare for Use: For optimal hygiene and comfort, it is recommended to wear socks when using the foot massager.

Operating Instructions

The Homedics Shiatsu Flex Ankle & Foot Massager offers various settings for a personalized experience. Use the control panel on the device or the dedicated smartphone app.

Close-up of the control panel with buttons for Heat, Strength, Mode, and Power.

1. Power On/Off: Press the Power button to turn the massager on. The indicator light will illuminate. Press again to turn off.
2. Selecting Massage Modes: Press the Mode button to cycle through the available massage styles:
   • Shiatsu: Deep kneading massage.
   • Flex: Combines shiatsu with other movements.
   • Air Compression: Rhythmic squeezing massage.
   

   Visual representation of the shiatsu massage nodes and heat function within the foot compartments.
   

   Diagram showing air compression sleeves inflating around the feet for a rhythmic massage.

3. Adjusting Strength: Press the Strength button to increase or decrease the intensity of the massage.
4. Activating Heat Function: Press the Heat button to activate the soothing heat function. Press again to turn off. Note that the heat function may not be intensely hot but provides gentle warmth.
5. Smartphone App Feature: Download the Homedics Massage App from your smartphone's app store. This app allows you to control the massager and create custom massage programs. Ensure Bluetooth is enabled on your phone. If the app fails to connect, try unplugging the massager for 10 seconds and plugging it back in to reset the Bluetooth connection.

Care and Maintenance

• Cleaning: Always unplug the massager before cleaning. Wipe the exterior with a soft, slightly damp cloth. Do not use abrasive cleaners, brushes, gasoline, kerosene, glass/furniture polish, or paint thinner to clean the massager.
• Storage: Store the massager in its box or a cool, dry place. Avoid contact with sharp edges or pointed objects which might cut or puncture the fabric surface.

Troubleshooting

Product Specifications

• Brand: Homedics
• Model Number: 86361
• Product Dimensions: 17.17 x 10.71 x 15.04 inches
• Item Weight: 12.35 Pounds
• Power Source: Corded Electric
• Special Features: Bi-Direction Control, Heat, Speed Control
• Use For: Ankle, Feet
• Color: Black and Grey
• Manufacturer: Homedics

Warranty and Customer Support

For warranty information or to contact customer support, please refer to the warranty card included with your product or visit the official Homedics website. You may also find contact details on the product packaging.