PetSafe PFD00-15956

PetSafe 6 Meal Automatic Pet Feeder User Manual

Model: PFD00-15956 | Brand: PetSafe

Introduction

The PetSafe 6 Meal Automatic Pet Feeder is designed to provide scheduled meals for your cat or small dog, ensuring they are fed on time even when you are away. This feeder features 6 individual compartments, each capable of holding up to 1 cup of dry or semi-moist pet food. It includes a digital clock with an LCD display for easy programming and offers flexible meal scheduling options.

This manual provides detailed instructions for setting up, operating, and maintaining your PetSafe 6 Meal Automatic Pet Feeder.

PetSafe 6 Meal Automatic Pet Feeder with a cat eating from it

Figure 1: PetSafe 6 Meal Automatic Pet Feeder in use with a cat.

Components

Note: 4 D-cell alkaline batteries are required for operation and are not included.

Setup

  1. Install Batteries: Locate the battery compartment on the underside of the feeder. Insert 4 D-cell alkaline batteries, ensuring correct polarity.
  2. Fill Tray Carousel: Lift the clear, locking lid. Fill each of the 6 compartments in the tray carousel with up to 1 cup of dry or semi-moist pet food.
  3. Secure Lid: Close the clear, locking lid firmly to keep food fresh and prevent pets from accessing it prematurely.
  4. Place Food Bowl: Ensure the removable food bowl is correctly positioned at the dispensing opening of the feeder.
  5. Position Feeder: Place the feeder on a flat, stable surface where your pet can easily access the food bowl.
Top view of PetSafe feeder with food in compartments and clear lid

Figure 2: Feeder with food compartments visible. The clear, locking lid helps prevent pets from accessing food prematurely.

Operating Instructions

Setting the Clock

  1. Press the CLOCK button. The hour digits will flash.
  2. Use the UP and DOWN arrows to set the current hour. Pay attention to AM/PM indicator.
  3. Press the CLOCK button again. The minute digits will flash.
  4. Use the UP and DOWN arrows to set the current minutes.
  5. Press the CLOCK button one more time to save the time.
Close-up of the PetSafe feeder's digital control panel with LCD display

Figure 3: Digital control panel for easy programming.

Programming Meals

The feeder allows you to schedule up to 6 meals per day. Each meal corresponds to one compartment rotation.

  1. Press the MEAL button. The first meal time will flash.
  2. Use the UP and DOWN arrows to set the desired hour for the first meal.
  3. Press the MEAL button again to set the minutes. Use the UP and DOWN arrows.
  4. Repeat steps 1-3 for each additional meal you wish to schedule (up to 6 meals). If you do not wish to schedule all 6 meals, simply press the MEAL button until the display returns to the current time.
  5. Once all meals are programmed, the feeder will automatically dispense food at the scheduled times daily.
PetSafe feeder with a dog eating from the bowl, illustrating multiple feed options

Figure 4: The feeder supports multiple meal times for flexible feeding schedules.

Feed Now Function

To dispense the next scheduled meal immediately, press the FEED NOW button on the display. This will rotate the tray to the next available compartment.

Sleep Mode

If you need to temporarily stop scheduled meals without losing your programmed settings, activate the Sleep Mode. Refer to the quick start guide for specific button presses to enter and exit Sleep Mode. This function also helps preserve battery life when the feeder is not in active use.

Cleaning and Maintenance

Regular cleaning ensures the longevity and hygiene of your pet feeder.

PetSafe feeder with the removable bowl detached, showing it's BPA-free

Figure 5: The removable bowl and tray carousel are designed for easy cleaning.

Troubleshooting

Problem Possible Cause Solution
Feeder not dispensing food. Low batteries; incorrect programming; food jammed. Replace batteries; re-check meal schedule; clear any food obstructions.
Lid not closing securely. Food overflow; debris in latch mechanism. Do not overfill compartments; clean lid and latch area.
Display is blank or dim. Low or dead batteries. Replace all 4 D-cell batteries.

If you encounter issues not listed here, please refer to the support information in the Warranty and Support section.

Specifications

PetSafe feeder with dimensions labeled: 9.6 inches wide, 6.4 inches high, 15.7 inches deep

Figure 6: Dimensions of the PetSafe 6 Meal Automatic Pet Feeder.

Warranty and Support

This PetSafe product comes with a 1 Year Limited Warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For further assistance, troubleshooting, or to make a warranty claim, please visit the official PetSafe website or contact their customer support. A comprehensive User Manual in PDF format is also available for download:

Download User Manual (PDF)

Related Documents - PFD00-15956

Preview PetSafe Smart Feed PFD00-15788: Operating Guide and User Manual
Comprehensive operating guide for the PetSafe Smart Feed automatic pet feeder (model PFD00-15788). Learn about setup, features, troubleshooting, safety, and app usage for smart pet feeding.
Preview PetSafe 5-Meal Feeder Instructions
User manual for the PetSafe 5-Meal Feeder. Learn how to install batteries, set the time of day, program up to five daily feeding times, suspend feedings, and turn off the device. Includes descriptions of controls and indicators.
Preview PetSafe 5 Meal Pet Feeder: Setup and Operation Guide
A comprehensive guide to setting up, cleaning, and operating the PetSafe 5 Meal Pet Feeder. Learn how to program meal times, set the clock, and manage feeding schedules for your pet.
Preview PetSafe Eatwell 5-Meal Pet Feeder: Setup and Operation Guide
Step-by-step instructions for setting up and operating the PetSafe Eatwell 5-Meal Pet Feeder. Learn how to install batteries, set the time, program feeding schedules, suspend feeding, and turn off the device.
Preview PetSafe Smart Feed PFD00-16828 Quick Start Guide
Quick start guide for the PetSafe Smart Feed automatic pet feeder (model PFD00-16828). Learn about setup, safety, app usage, and troubleshooting for your smart pet feeder.
Preview PetSafe Six Meal Feeder PFD00-15956 Quick Start Guide
This Quick Start Guide provides essential information for setting up, programming, and maintaining your PetSafe PFD00-15956 Six Meal Feeder. Learn about safety precautions, components, assembly, programming meals, and cleaning instructions.