1. Introduction
This document serves as an instruction manual for the Thule Screw RTS 4,2x13 Grey, model number 1500052319. This screw is a specific component designed for use with Thule roof bar systems, particularly models 958 and 959. It is intended for replacement or assembly purposes to ensure the secure fastening of various roof rack components. Always refer to the primary instruction manual of your specific Thule roof bar system for complete assembly details.
2. Package Contents
The package for this product typically contains:
- 1 x Thule Screw RTS 4,2x13 Grey (Model 1500052319)
Image: A single grey Thule screw, model RTS 4,2x13, featuring a hexagonal head. This screw is designed for secure fastening within Thule roof rack systems.
3. Setup and Installation
The Thule Screw RTS 4,2x13 Grey is an integral part of assembling or maintaining your Thule roof bar system. Its primary function is to secure specific components of the roof rack. Follow the steps below in conjunction with your main Thule roof bar system manual.
3.1. Component Identification
Before installation, identify the components of your roof bar system where this screw is to be used. The screw (often labeled 'F' in diagrams) is typically used to fasten parts of the roof bar assembly, such as end caps or mounting brackets.
Image: An exploded diagram illustrating various components of a Thule roof bar system. Key parts include the roof bar (A), end caps (B, D), rubber strip (E), and the screw (F). The screw (F) is depicted with dimensions 20mm and a quantity of x4, indicating its role in securing multiple points of the roof bar assembly. An Allen key (H) is also shown, suggesting the tool required for tightening.
3.2. Fastening Procedure
- Align the components: Ensure the parts to be joined are correctly aligned according to your roof bar system's instructions.
- Insert the screw: Place the Thule Screw RTS 4,2x13 Grey into the designated hole.
- Tighten the screw: Using an appropriate Allen key (as indicated by component H in the diagram), carefully tighten the screw. Avoid over-tightening, which can strip threads or damage components. Refer to your main roof bar manual for specific torque settings if provided.
- Verify security: After tightening, gently check the fastened components to ensure they are secure and stable.
Image: Another exploded diagram of Thule roof bar components. This illustration features a different type of fastener (G) and a torque wrench (H) with a specified setting of 2Nm. While this diagram shows a different fastener, it emphasizes the importance of precise tightening for secure installation within the Thule system.
4. Usage and Function
The Thule Screw RTS 4,2x13 Grey is designed to provide a secure and reliable connection between various parts of your Thule roof rack system. Its specific dimensions and material composition ensure compatibility and durability within the intended Thule products. Proper installation ensures the structural integrity and safety of your roof rack when carrying loads.
5. Maintenance
To ensure the longevity and continued performance of your Thule Screw RTS 4,2x13 Grey and the overall roof bar system:
- Regular Inspection: Periodically check all screws and fasteners on your roof rack for tightness. Vibrations during travel can sometimes loosen components.
- Cleaning: Clean the screws and surrounding areas with mild soap and water. Avoid harsh chemicals that could corrode the material.
- Replacement: If a screw shows signs of wear, corrosion, or damage (e.g., stripped head or threads), replace it immediately with an authentic Thule replacement part to maintain safety and performance.
6. Troubleshooting
If you encounter issues with the Thule Screw RTS 4,2x13 Grey:
- Screw does not fit: Double-check the model number of your roof bar system and ensure you have the correct screw size and type. Refer to your main roof bar manual.
- Screw is loose: Re-tighten the screw using the appropriate tool. If it repeatedly loosens, inspect the threads on both the screw and the component it fastens for damage. Replace damaged parts as necessary.
- Stripped head: If the screw head is stripped, making it difficult to tighten or remove, use a screw extractor tool or seek professional assistance. Prevent stripping by using the correct tool size and applying even pressure.
7. Specifications
| Manufacturer | THULE |
| Part Number | 1500052319 |
| Item Model Number | 1500052319 |
| Item Weight | 14.1 ounces |
| Package Dimensions | 3.94 x 3.15 x 2.36 inches |
| Color | Grey |
| Item Package Quantity | 1 |
| Batteries Required? | No |
8. Warranty and Support
For specific warranty information regarding Thule products, including replacement parts like this screw, please refer to the official Thule website or the warranty documentation provided with your original Thule roof bar system. Thule products are known for their quality, and genuine replacement parts ensure continued performance and safety.
For further assistance or to contact customer support, please visit the official Thule website: www.thule.com
