1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your EGLO Lighting 202128A Three Light Linear Pendant. Please read all instructions carefully before beginning installation and retain this manual for future reference. This product is designed for indoor use only.
Image 1.1: EGLO Lighting 202128A Three Light Linear Pendant. This image displays the three-light linear pendant fixture with clear glass shades and matte black accents, illuminated.
2. Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. Consult a qualified electrician if you are unsure about the installation process.
- Ensure all electrical connections comply with local codes and ordinances, as well as the National Electric Code (NEC).
- Do not install this fixture in wet or damp locations.
- Use only the specified bulb type and wattage.
- Never attempt to modify the fixture.
- Keep flammable materials away from the light fixture.
- Always wear safety glasses during installation.
3. Package Contents
Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact customer support for assistance.
- Light Fixture Assembly (Model 202128A)
- Mounting Hardware (screws, wire nuts, mounting plate)
- Instruction Manual
4. Setup and Installation
Professional installation is recommended for this product. Ensure power is disconnected at the circuit breaker before proceeding.
- Prepare the Installation Area: Turn off power at the main circuit breaker. Clear the area around the electrical box.
- Mounting Plate Installation: Attach the mounting plate to the electrical junction box using the provided screws. Ensure it is securely fastened.
- Electrical Connections:
- Connect the fixture's ground wire (bare copper or green) to the house ground wire.
- Connect the fixture's white wire to the house white (neutral) wire.
- Connect the fixture's black wire to the house black (hot) wire.
- Secure all connections with wire nuts and electrical tape.
- Fixture Attachment: Carefully lift the fixture and attach it to the mounting plate, securing it with the provided screws or nuts.
- Install Light Bulbs: Insert the recommended light bulbs (not included) into the sockets. Refer to the specifications for appropriate wattage.
- Restore Power: Turn the power back on at the circuit breaker.
Image 4.1: EGLO Lighting 202128A Pendant Light. This image shows a different angle of the three-light linear pendant, potentially illustrating components or an installation view.
5. Operating Instructions
The EGLO Lighting 202128A pendant operates like a standard light fixture. Once properly installed and connected to a power source, it can be controlled by a wall switch (not included) connected to the circuit.
- Turning On/Off: Use the wall switch to turn the light fixture on or off.
- Bulb Replacement:
- Turn off power to the fixture at the circuit breaker.
- Allow bulbs to cool completely before touching.
- Carefully unscrew the old bulb.
- Screw in a new bulb of the correct type and wattage (refer to specifications).
- Restore power at the circuit breaker.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your light fixture.
- Cleaning:
- Always disconnect power before cleaning.
- Wipe the fixture with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Clean glass shades with a mild glass cleaner and a soft cloth.
- Inspection: Periodically check all electrical connections and mounting hardware for tightness.
7. Troubleshooting
If your fixture is not functioning correctly, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
If the problem persists after attempting these solutions, contact a qualified electrician or customer support.
8. Specifications
| Model Number | 202128A |
| Brand | EGLO |
| Product Dimensions | 28"L x 4.38"W x 11.38"H |
| Item Weight | 4 Pounds |
| Color | Matte Black |
| Style | Contemporary |
| Light Fixture Form | Pendant |
| Number of Light Sources | 3 |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
| Wattage | 180 watts (Max total) |
| Shade Material | Glass |
| Finish Type | Finished |
| Mounting Type | Protruding |
| Assembly Required | Yes |
| Recommended Uses | Living Room, Island Lighting |
9. Warranty Information
All products purchased have a 30-day replacement parts policy to ensure a fully working item. All products are covered under a 1-year warranty when purchased on Amazon. The warranty period begins on the day the product is originally shipped. The warranty covers all of the items and conditions identified in the original manufacturer's warranty. Some of the items specifically not covered by the warranty are loss and theft, water damage, customer abuse, and finish deterioration due to UV or coastal exposure.
10. Customer Support
For technical assistance, missing parts, or warranty claims, please contact EGLO customer support. Refer to the official EGLO website for the most current contact information.
EGLO Official Website: www.eglo.com
