Introduction
This manual provides essential information for the safe and effective use of your Motorola Travel Charger. Please read these instructions carefully before using the product. Keep this manual for future reference.
Safety Information
Observe the following safety precautions to prevent injury or damage to the product:
- CAUTION: RISK OF ELECTRIC SHOCK. Do not open the charger casing.
- DRY LOCATION USE ONLY. Do not expose the charger to water, moisture, or high humidity.
- Ensure the charger is connected to a power outlet within the specified voltage range (100-240V).
- Do not use the charger if the cable or plug is damaged.
- Keep out of reach of children.
- Unplug the charger from the power outlet when not in use or during electrical storms.
Package Contents
Verify that your package contains the following item:
- 1 x Motorola Travel Charger (Model FMP5632A / SPN5633A)
Setup
Follow these steps to set up your Motorola Travel Charger:
- Uncoil the charger cable.
- Locate a standard wall power outlet (100-240V).
- Insert the two-prong plug of the charger into the wall outlet.
- Locate the charging port on your Motorola Xoom Tablet.
- Carefully insert the barrel connector of the charger cable into the tablet's charging port.
Image: Motorola Travel Charger. This image shows the Motorola Travel Charger. It features a black rectangular adapter with a two-prong plug for wall outlets. The adapter has product information printed on it, including model numbers FMP5632A and SPN5633A, input/output specifications, and safety warnings. An attached black cable extends from the adapter, ending in a barrel connector designed to plug into compatible Motorola Xoom tablets. The cable is coiled neatly.
Operating Instructions
Once connected, the charger will begin supplying power to your Motorola Xoom Tablet. The tablet's screen or indicator light should show that it is charging.
- The charger is designed for continuous charging.
- Charging time may vary depending on the tablet's battery level and usage during charging.
- The charger features Short Circuit Protection to safeguard your device.
Maintenance
To ensure the longevity and proper functioning of your charger:
- Keep the charger clean and free from dust. Use a dry, soft cloth for cleaning.
- Avoid bending or crimping the cable excessively.
- Store the charger in a cool, dry place when not in use.
- Do not attempt to disassemble or repair the charger yourself.
Troubleshooting
If your charger is not functioning as expected, consider the following:
- Tablet not charging:
- Ensure the charger is securely plugged into both the wall outlet and the tablet.
- Try a different wall outlet to rule out a power source issue.
- Check for any visible damage to the charger cable or connector.
- Charger feels warm: It is normal for the charger to become slightly warm during operation. If it becomes excessively hot, unplug it immediately and contact support.
Specifications
| Feature | Detail |
|---|---|
| Model Numbers | FMP5632A, SPN5633A |
| Input | 100-240V ~ 50/60Hz 0.6A |
| Output | 12V - 1.5A (18W) |
| Connector Type | 2-Pin Barrel Connector |
| Special Feature | Short Circuit Protection |
| Compatible Devices | Motorola Xoom Tablet (Mz600, Mz601, Mz603, Mz604, Mz605, Mz606) |
| Item Weight | 0.95 ounces |
| Package Dimensions | 4.1 x 3.9 x 1.3 inches |
| Manufacturer | FOR Motorola |
| Country of Origin | China |
Warranty Information
Specific warranty details for this product may vary. Please refer to the original product packaging or contact Motorola customer support for comprehensive warranty information.
Support
For further assistance, technical support, or to inquire about replacement parts, please visit the official Motorola support website or contact their customer service department.
You can find more information on the Motorola Store on Amazon.