1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your AIBOO Linkable Under Cabinet LED Lighting Kit. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Package Contents
Verify that all components listed below are included in your package:
- 10 x 12V LED Under Cabinet Puck Lights
- 1 x LED Hardwired Transformer with Wall Plug (AC120 to DC12V)
- 1 x Distributor (6-way splitter)
- 1 x Wireless RF Remote Controller (including a receiver and a remote)
- 4 x Extension Cables (5ft each)
- 10 x Double-Sided Adhesive Stickers
- 20 x Screws
3. Specifications
| Feature | Specification |
|---|---|
| Brand | AIBOO |
| Model Number | YK-300000197 |
| Light Color | Warm White |
| Color Temperature | 2700 Kelvin |
| Luminous Flux | 1000 Lumen (Total for 10 lights) |
| Wattage | 20.00 Watts (Total for 10 lights) |
| Voltage | 12 Volts |
| Puck Light Dimensions (L x W x H) | 2.36 x 2.36 x 0.31 inches (6 x 6 x 0.8 cm) |
| Power Source | Corded Electric (Hardwired or Wall Plug-in) |
| Control Method | Wireless RF Remote Control |
| Special Features | Dimmable, Linkable (Series Connection) |
| Indoor/Outdoor Usage | Indoor |
| Water Resistance Level | Not Water Resistant |
| Batteries Required (for remote) | 1 CR2 battery (included) |
4. Setup and Installation
The AIBOO Linkable Under Cabinet LED Lighting Kit offers two installation methods: hardwired or wall plug-in. Choose the method that best suits your needs.
4.1. General Installation Steps
- Plan Layout: Determine the desired placement for each puck light under your cabinets or shelves. Ensure the cables can reach the distributor and power source.
- Mount Puck Lights:
- Adhesive Method: Clean the mounting surface thoroughly. Peel the backing from the double-sided adhesive sticker and firmly press it onto the back of the puck light. Then, press the light onto the desired surface.
- Screw Method: Use the provided screws to secure the puck lights to the desired surface. Ensure the screws are tightened securely but do not overtighten.
- Connect Lights to Distributor: Connect the cables from each puck light to the 6-way distributor. Use the 5ft extension cables as needed to bridge longer distances between lights or to the distributor. The linkable design allows for simple wiring management.
- Connect Distributor to Receiver: Plug the distributor into the wireless RF remote receiver.
- Connect Receiver to Power Adapter: Plug the receiver into the 12V LED hardwired transformer/wall plug-in adapter.
- Power Connection:
- Wall Plug-in: Plug the power adapter into a standard AC120V wall outlet.
- Hardwired: For hardwired installations, consult a qualified electrician. Ensure power is disconnected before attempting any hardwiring.
5. Operating Instructions
The lighting kit is controlled by a wireless RF remote control, allowing for convenient operation.
5.1. Remote Control Functions
- ON/OFF: Press the "ON" button to turn the lights on, and "OFF" to turn them off.
- Brightness Adjustment:
- "LIGHT +" / "BRIGHT +": Increases brightness.
- "LIGHT -" / "BRIGHT -": Decreases brightness.
- Preset levels: Buttons for 100%, 50%, and 25% brightness.
- Pairing: If the remote does not control the lights, press "Pair" or "Decode" until the lights flicker. This indicates successful pairing.
- Timing Settings: Buttons for 1H, 2H, 4H, and 8H allow you to set an automatic shut-off timer for 1, 2, 4, or 8 hours respectively.
6. Maintenance
To ensure the longevity and optimal performance of your AIBOO LED lighting kit, follow these maintenance guidelines:
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to gently wipe the puck lights and other components. Avoid abrasive cleaners, solvents, or excessive moisture, as these can damage the product.
- Cable Management: Periodically check all cable connections to ensure they are secure. Avoid placing heavy objects on cables or bending them sharply, which can cause damage.
- Remote Battery: If the remote control's range or responsiveness decreases, replace the CR2 battery. Refer to the remote's battery compartment for instructions on replacement.
- Environmental Conditions: This product is designed for indoor use only. Avoid exposure to water, high humidity, or extreme temperatures.
7. Troubleshooting
If you encounter issues with your AIBOO LED lighting kit, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. |
|
|
| Lights flicker or dim unexpectedly. |
|
|
| Remote control is unresponsive. |
|
|
8. Warranty Information
AIBOO products are typically covered by a manufacturer's warranty. For specific details regarding the warranty period and terms for your YK-300000197 lighting kit, please refer to the documentation included with your purchase or contact AIBOO customer support directly. Keep your purchase receipt as proof of purchase.
9. Customer Support
For further assistance, technical support, or inquiries regarding your AIBOO Linkable Under Cabinet LED Lighting Kit, please contact AIBOO customer service. Contact information can usually be found on the product packaging or the official AIBOO website.
The seller for this product is AIBOO Lighting. For support, you may visit their store page on Amazon or contact them through the Amazon platform.
