Doc Johnson Main Squeeze Male Masturbator Instruction Manual

1. Product Overview

The Doc Johnson Main Squeeze is a male masturbator designed for variable pressure and suction control. It features a textured ULTRASKYN sleeve housed within a hard outer case, providing a lifelike experience. The design allows for discreet storage and easy cleaning.

• Textured ULTRASKYN Masturbator: Provides a realistic feel.
• Hard Outer Case: Ensures durability and discreet storage.
• Squeeze Plate: Allows for user-controlled pressure adjustment.
• Adjustable End Cap: Controls natural suction by tightening or loosening.
• Fully Disassembles: Facilitates thorough cleaning.

Image 1: The Doc Johnson Main Squeeze device, removed from its packaging.

2. Setup and Initial Cleaning

Before first use, and after each subsequent use, the device must be thoroughly cleaned. Follow these steps for disassembly and cleaning:

1. Gently pull the ULTRASKYN stroker tunnel from the top of the hard case to remove it.
2. The squeeze-grip section may detach from its magnetic dock and fall inside the case. Remove this section from the case.
3. Separate all components: the hard outer case, the ULTRASKYN stroker tunnel, and the squeeze-grip section.
4. Wash each section using Doc Johnson Toy Cleaner or a mild soap and warm water.
5. Rinse all components thoroughly to remove any soap residue.
6. Allow all parts to air dry completely before reassembly or storage.
7. Once dry, dust the ULTRASKYN section with Doc Johnson Refresh™ Powder (sold separately) to maintain its texture and feel.

Image 2: Exploded view of the Main Squeeze, illustrating its separable components for cleaning.

Image 3: A hand demonstrating the removal of the ULTRASKYN stroker tunnel from the hard case.

3. Operating Instructions

To use your Doc Johnson Main Squeeze, ensure it is clean and fully reassembled. Apply a water-based lubricant to the entrance of the ULTRASKYN sleeve for comfortable use.

• Pressure Control: The hard outer case features a squeezable grip. Apply pressure to the sides of the case to increase the tightness and sensation of the ULTRASKYN sleeve. Releasing pressure will loosen the grip.
• Suction Control: The end cap of the device can be twisted to adjust the level of suction. Tightening the end cap will increase suction, while loosening it will reduce suction. Experiment to find your preferred level of sensation.

4. Maintenance and Storage

Proper maintenance ensures the longevity and hygiene of your Main Squeeze. Always clean the device immediately after each use.

Cleaning Procedure:

1. Disassemble the Main Squeeze as described in the "Setup and Initial Cleaning" section (hard case, ULTRASKYN tunnel, squeeze-grip section).
2. Wash each component thoroughly with Doc Johnson Toy Cleaner or mild soap and warm water.
3. Rinse all parts completely to remove any cleaning agents.
4. Allow all components to air dry fully. Ensure no moisture remains before reassembly.
5. Apply Doc Johnson Refresh™ Powder to the ULTRASKYN sleeve to maintain its texture and prevent stickiness.

Storage:

After cleaning and ensuring all parts are dry, reassemble the Main Squeeze. Store the device in a cool, dry place with the caps securely on to protect the ULTRASKYN material and maintain discretion.

5. Troubleshooting

This section addresses common issues you might encounter with your Doc Johnson Main Squeeze.

• Difficulty Disassembling/Reassembling: Ensure you are gently pulling the ULTRASKYN sleeve from the top. The squeeze-grip section is designed to be removable for cleaning. If parts feel stuck, ensure they are dry and free of lubricant residue.
• Reduced Suction: Check that the end cap is tightened sufficiently. If suction is still weak, ensure all components are correctly seated and there are no gaps.
• Sticky ULTRASKYN Material: This is normal over time. Regular application of Doc Johnson Refresh™ Powder (or a similar cornstarch-based powder) after cleaning and drying will restore the smooth, non-sticky feel.
• Unpleasant Odor: Thorough cleaning with a dedicated toy cleaner and complete drying are essential. Ensure no moisture is trapped inside the device during storage.

6. Specifications

7. Warranty and Support

Specific warranty information for the Doc Johnson Main Squeeze is not provided in the product details. For inquiries regarding warranty coverage, product support, or replacement parts, please contact Doc Johnson Enterprises directly through their official website or customer service channels.

Manufacturer Contact: Doc Johnson Enterprises

Please refer to the official Doc Johnson Store on Amazon or their corporate website for the most current contact information and support resources.

8. Important Safety Information

This product is intended for adult use only. Please read and understand all instructions before use.

• Always use a water-based lubricant with ULTRASKYN products. Oil-based lubricants can damage the material and should be avoided.
• Inspect the product thoroughly before and after each use for any signs of damage, tears, or degradation. Discontinue use if any damage is observed.
• Maintain strict hygiene by cleaning the product immediately after each use, following the detailed maintenance instructions provided in this manual.
• Store the product in a clean, dry, and discreet location, away from direct sunlight, extreme temperatures, and out of reach of children.
• If you experience any discomfort or irritation during or after use, discontinue use immediately and consult a healthcare professional.