1. Introduction
Thank you for choosing the Blum Blumotion Soft Close Damper. This product is designed to provide a quiet and gentle closing action for cabinet doors, preventing slamming and reducing wear. This manual provides detailed instructions for the proper installation, operation, and maintenance of your Blumotion dampers.
2. Safety Information
- Keep small parts away from children to prevent choking hazards.
- Always use appropriate tools for installation.
- Ensure the installation surface is clean and free from debris.
- Do not attempt to modify the damper, as this may affect its performance and void any potential warranty.
3. Package Contents
Your package should contain the following items:
- 5 x Blum Blumotion Soft Close Dampers (Model B970.1002-5)
4. Installation
The Blumotion damper is designed for easy installation into a 10mm bullet hole. Follow these steps for optimal performance:
- Identify Installation Location: Determine the best location on your cabinet frame or door to install the damper. It should be positioned so that the cabinet door makes contact with the damper when closing. Typically, this is on the cabinet frame near the hinge side.
- Drill the Hole: Using a 10mm drill bit, carefully drill a hole approximately 50mm (2 inches) deep into the chosen location. Ensure the hole is straight and clean.
- Insert the Damper: Gently push the Blumotion damper into the drilled hole. The damper should fit snugly. If it is too loose, the hole may be too large. If it is too tight, do not force it, as this may damage the damper.
- Test Functionality: Close the cabinet door slowly to ensure it makes contact with the damper and closes softly. Adjust the position if necessary. For optimal soft-closing, multiple dampers may be required for larger or heavier doors.
Figure 1: Angled view of the Blum Blumotion Soft Close Damper. This image shows the cylindrical body and the grey soft-close tip.
Figure 2: Straight-on view of the Blum Blumotion Soft Close Damper. This image highlights the full length of the damper and its grey tip.
5. Operation
Once installed, the Blumotion damper operates automatically. As the cabinet door closes, it will make contact with the damper's tip. The internal mechanism of the damper will then slow down the door's movement, ensuring a gentle and silent close. No manual adjustment is typically required after proper installation.
6. Maintenance
The Blumotion Soft Close Damper requires minimal maintenance:
- Cleaning: Periodically wipe the visible part of the damper with a soft, damp cloth to remove dust or grime. Avoid using harsh chemical cleaners.
- Inspection: Occasionally check that the damper remains securely in its drilled hole. If it becomes loose, it may need to be re-seated or the hole may require a small amount of adhesive for a tighter fit.
- Functionality Check: If the soft-closing action diminishes, ensure the damper is still making proper contact with the door.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Door does not close softly. | Damper not making proper contact with the door, or door is too heavy for a single damper. | Ensure the damper is positioned correctly. For heavier doors, consider installing an additional damper. |
| Damper falls out of the hole. | Hole is too large, or damper was not fully inserted. | Re-insert the damper firmly. If the hole is too large, a small amount of wood glue or a similar adhesive can be used to secure it. |
| Door still slams. | Damper is faulty or not installed correctly. | Verify installation steps. If the issue persists, the damper may need replacement. |
8. Specifications
- Brand: Blum
- Model Number: B970.1002-5
- Part Number: B970.1002
- Type: Soft Close Damper (Bullet Hole Insert)
- Insert Diameter: 10mm
- Color: Gray
- Item Weight (per damper): Approximately 0.14 ounces
- Package Quantity: 5
9. Warranty and Support
For specific warranty information, please refer to the documentation provided with your purchase or contact Blum directly. For technical support or further assistance, please visit the official Blum website or contact their customer service department.
Blum Official Website: www.blum.com
