Tangkula 2-Person Porch Swing Instruction Manual

Introduction

This manual provides essential information for the safe assembly, operation, and maintenance of your Tangkula 2-Person Porch Swing. Please read all instructions carefully before assembly and use to ensure proper function and longevity of the product. This porch swing is designed for outdoor use, offering a comfortable seating solution with an adjustable canopy for sun protection.

Image: The Tangkula 2-Person Porch Swing in beige, showcasing its design and adjustable canopy.

Safety Information

• Weight Capacity: Do not exceed the maximum weight capacity of approximately 390 lbs (177 kg).
• Assembly: Ensure all bolts and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
• Placement: Place the swing on a flat, stable surface. Avoid uneven ground.
• Weather Conditions: In strong winds or severe weather, it is recommended to secure the swing or remove the canopy to prevent damage or tipping.
• Children: Supervise children when they are using the swing.
• Maintenance: Regularly inspect the frame, chains, and fabric for any signs of wear or damage. Replace worn parts immediately.

Parts List

Please ensure all parts are present before beginning assembly. Refer to the assembly video for a visual guide to all components.

• Steel Frame Components (various lengths and shapes)
• Swing Seat Frame
• Canopy Frame
• Canopy Fabric
• Seat Cushions
• Spring Hooks
• Protective Foot Pads
• Assembly Hardware (bolts, nuts, washers, wrenches)

Image: Detailed view of the swing's components, highlighting the steel structure, foot pads, and fabric materials.

Setup and Assembly

Assembly typically requires two people. Follow the steps below and refer to the provided assembly videos for visual guidance.

Assembly Video Guide

Video: Comprehensive assembly instructions for the Tangkula Porch Swing.

Video: Additional porch swing installation video, demonstrating key assembly steps.

Step-by-Step Instructions:

1. Assemble the Main Frame: Connect the top horizontal bar (A) to the two side A-frames (B) using the provided bolts and nuts. Ensure all connections are secure. Attach the protective foot pads (9) to the bottom of the A-frames.
2. Install Crossbars: Attach the lower crossbars (C) between the A-frames using bolts (7). Secure the diagonal support bars (D) to the A-frames and the top bar (A) using bolts (5) and (6).
3. Assemble the Swing Seat: Attach the armrests (F) to the main seat frame (G) using bolts (4) and (6). Ensure the seat is properly aligned.
4. Hang the Swing Seat: Attach the spring hooks (1) to the top bar (A) of the main frame. Carefully lift the assembled swing seat and attach its hanging bars (E) to the spring hooks.
5. Prepare the Canopy: Slide the canopy fabric (I) onto the canopy frame (H). Secure the fabric using the attached straps or ties.
6. Attach the Canopy: Mount the assembled canopy onto the top of the main frame, aligning the holes. Secure it with the canopy adjusting knobs (8).
7. Place Cushions: Position the removable cushions (J) onto the swing seat for comfort.

Operating Instructions

• Using the Swing: Gently sit on the swing seat. The swing motion is designed to be smooth and relaxing. Avoid excessive force or standing on the swing.
• Adjusting the Canopy: The canopy angle can be adjusted from 0-45 degrees to provide optimal shade. Loosen the canopy top adjusting knobs on both sides, set the desired angle, and then re-tighten the knobs to secure the canopy in place.

Image: Close-up of the adjustable canopy mechanism, allowing for customized shade.

Maintenance

• Cleaning the Frame: Wipe the steel frame with a damp cloth and mild soap. Dry thoroughly to prevent rust.
• Cleaning the Fabric: The polyester and oxford cloth are waterproof. For general cleaning, wipe with a damp cloth. For deeper cleaning, the removable cushions can be spot cleaned with a mild detergent. Allow to air dry completely.
• Rust Prevention: The frame has a powder-coated finish for rust resistance. However, regular cleaning and ensuring the frame is dry after rain will prolong its lifespan.
• Storage: During prolonged periods of non-use or severe weather, consider storing the cushions indoors and covering the swing to protect it from the elements.

Troubleshooting

• Swing feels unstable: Ensure all bolts and nuts are securely tightened. Check that the swing is placed on a level surface.
• Canopy does not stay in position: Verify that the canopy top adjusting knobs are fully tightened after setting the desired angle.
• Squeaking noise during swinging: Apply a small amount of lubricant to the spring hooks and pivot points of the swing mechanism.

Specifications

Image: Key dimensions and weight capacity of the porch swing.

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Tangkula customer service directly. Keep your purchase receipt for warranty claims.