1. Introduction
Thank you for choosing the Premier Mounts AM65 Dual Arm Swing Out Mount. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new TV wall mount. Please read this manual thoroughly before installation and keep it for future reference.
The AM65 is designed to securely hold your flat-panel display, offering flexibility with its dual-arm swing-out functionality, allowing for optimal viewing angles.
2. Important Safety Information
WARNING: Failure to read and follow all instructions can result in personal injury, property damage, or voiding of warranty.
- Do not install this product on walls that are not structurally sound.
- Ensure the mounting surface can safely support the combined weight of the mount and the display.
- Always use a stud finder to locate wood studs or ensure you are mounting into concrete/brick with appropriate anchors.
- Do not overtighten screws; this may cause damage and reduce holding capacity.
- Never exceed the maximum weight capacity of the mount (check specifications).
- Keep children and pets away during installation.
- If you have any doubts about the installation, consult a qualified professional.
3. Package Contents
Please verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact Premier Mounts customer service.
- AM65 Wall Mount Assembly
- TV Mounting Brackets (2 pcs)
- Hardware Kit (various screws, washers, spacers for TV and wall attachment)
- Installation Template (if applicable)
- User Manual
Figure 3.1: An image showing the Premier Mounts AM65, a black dual-arm swing-out TV wall mount, designed for flat-panel displays. The mount features a wall plate, two articulating arms, and a VESA-compatible TV bracket.
4. Setup and Installation
4.1 Tools Required (Not Included)
- Phillips Head Screwdriver
- Drill with appropriate drill bits (wood/concrete)
- Stud Finder (for wood stud installation)
- Level
- Pencil
- Measuring Tape
- Socket Wrench (for lag bolts)
4.2 Installation Steps
- Prepare the Wall:
- For wood stud installation: Use a stud finder to locate the center of two adjacent wood studs. Mark the drilling locations.
- For concrete/brick wall installation: Mark the drilling locations.
- Attach Wall Plate:
- Position the wall plate at the marked locations. Use a level to ensure it is perfectly horizontal.
- Drill pilot holes at the marked locations.
- Secure the wall plate to the wall using the provided lag bolts and washers. Ensure it is firmly attached.
- Attach TV Brackets to Display:
- Carefully place your TV face down on a soft, clean surface.
- Identify the VESA mounting holes on the back of your TV.
- Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's mounting holes.
- Attach the two TV mounting brackets to the back of your display. Ensure they are centered and securely fastened. Do not overtighten.
- Mount Display to Wall Plate:
- With assistance, carefully lift the display with the attached brackets.
- Hook the TV brackets onto the wall plate. Ensure the brackets are securely seated.
- Engage any safety locking mechanisms on the brackets to prevent accidental dislodgement.
- Adjustments:
- Once mounted, gently test the stability of the installation.
- Adjust the tilt, swivel, and extension as desired (refer to Operating section).
5. Operating Your Mount
The Premier Mounts AM65 offers versatile positioning for your display.
- Swing/Extension: Gently pull or push the display to extend or retract the arms. The dual-arm design allows for smooth, wide-range movement.
- Swivel: Rotate the display left or right along the horizontal axis to achieve your desired viewing angle.
- Tilt: Loosen the tilt adjustment knobs (if applicable, or use the built-in tilt mechanism) on the TV brackets, adjust the screen to the desired vertical angle, and then tighten the knobs to secure.
Always move the display slowly and deliberately. Avoid sudden jerks or excessive force.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your mount.
- Cleaning: Wipe the mount with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Periodic Checks: Periodically check all screws and bolts to ensure they remain tight. Over time, vibrations or adjustments can cause fasteners to loosen.
- Lubrication: The articulating joints are designed for smooth movement. Avoid applying lubricants unless specifically instructed by the manufacturer.
7. Troubleshooting
If you encounter issues with your AM65 mount, refer to the following common problems and solutions:
- TV is not level:
- Check if the wall plate is level. If not, you may need to re-install.
- Some mounts have a post-installation leveling adjustment. Refer to specific bracket features.
- Mount feels loose or unstable:
- Ensure all wall mounting bolts are securely tightened.
- Verify that the TV brackets are properly seated and locked onto the wall plate.
- Confirm that the combined weight of the TV and mount does not exceed the mount's weight capacity.
- Difficulty moving the arms/swivel:
- Check for any obstructions.
- Ensure no cables are snagged or preventing movement.
- The joints are designed to be firm for stability. Do not force movement.
If the problem persists, contact Premier Mounts customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Premier Mounts |
| Model Number | 8541740479 |
| Product Description | Dual Arm Swing Out Mount |
| Product Dimensions | 2.2 x 19.6 x 16.6 inches |
| Item Weight | 10.1 pounds |
| Maximum Compatible Size | 65 Inches |
| Mounting Type | Art Deco (Note: This may refer to design aesthetic rather than mounting mechanism.) |
| Movement Type | Swinging |
| Color | Clear (Note: Product image shows black. This might refer to packaging or a specific component.) |
| UPC | 829973828707 |
| Manufacturer | PROGRESSIVE MARKETING PRODUCTS |
| Date First Available | August 15, 2017 |
9. Warranty and Support
Premier Mounts products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Premier Mounts website.
For technical support, missing parts, or any inquiries regarding your AM65 mount, please contact Premier Mounts customer service directly.
Premier Mounts Customer Service: Please refer to the manufacturer's official website or product packaging for contact details.
