Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your ledmo 120W LED Wall Pack Light. Please read this manual thoroughly before installation and retain it for future reference.
Image: The ledmo 120W LED Wall Pack Light, showcasing its design and typical outdoor installation.
Safety Information
Always follow basic safety precautions when installing or servicing electrical equipment to reduce the risk of fire, electric shock, or injury to persons.
- Disconnect Power: Ensure power is turned off at the circuit breaker or fuse box before installation or maintenance.
- Qualified Electrician: Installation should be performed by a qualified electrician in accordance with all national and local electrical codes.
- Grounding: Properly ground the fixture to avoid potential electrical shock.
- Voltage Compatibility: Verify that the supply voltage is compatible with the fixture's requirements (110 Volts).
- Secure Mounting: Mount the fixture securely to a structurally sound surface.
- Avoid Direct Eye Exposure: Do not stare directly into the LED light source when illuminated.
Package Contents
Verify that all components are present before beginning installation:
- 1 x ledmo 120W LED Wall Pack Light Fixture
- 1 x Light kit (mounting hardware)
Specifications
| Feature | Specification |
|---|---|
| Brand | ledmo |
| Model Name | LED899-W |
| Wattage | 120 Watts |
| Brightness | 15600 Lumens |
| Color Temperature | 5000 Kelvin (Daylight White) |
| Material | Aluminum alloy |
| Product Dimensions | 11.85"L x 6.69"W x 6.3"H |
| Item Weight | 6.27 pounds |
| Water Resistance Level | IP65 Waterproof |
| Average Life | 50,000 Hours |
| Installation Type | Flush Mount (Junction Box or Wall Mount) |
| Voltage | 110 Volts |
Installation Instructions
The ledmo 120W LED Wall Pack Light is designed for straightforward installation. Two primary methods are supported: direct wall mount or junction box installation.
1. Preparation
- Power Disconnection: Turn off the main power supply at the circuit breaker before starting any electrical work.
- Tools Required: Gather necessary tools including a screwdriver, wire strippers, drill, and appropriate mounting hardware.
- Location Selection: Choose a suitable outdoor location for mounting, ensuring the surface can support the fixture's weight and provides adequate light coverage.
Image: The updated design of the 120W LED Wall Pack Light is smaller and lighter, simplifying installation and reducing stress on mounting surfaces.
2. Mounting the Fixture
The fixture can be mounted directly to a wall or to a standard junction box.
- Wall Mount: Use the provided mounting hardware to secure the fixture directly to the wall. Ensure the mounting screws are driven into solid structural elements.
- Junction Box Mount: Align the fixture with the existing junction box. Use the appropriate screws to attach the fixture securely to the junction box.
Image: Illustration of the two flexible installation methods: directly to a wall or via a junction box.
3. Wiring
Connect the electrical wires according to standard electrical codes:
- Connect the black wire from the fixture to the live (hot) wire from the power supply.
- Connect the white wire from the fixture to the neutral wire from the power supply.
- Connect the green (or bare copper) wire from the fixture to the ground wire from the power supply.
- Ensure all connections are secure using wire nuts or appropriate connectors.
After wiring, carefully tuck all wires into the junction box or fixture housing and secure the fixture cover.
Video: A demonstration of the ledmo 120W LED Wall Pack Light's brightness and coverage in an outdoor setting, highlighting its suitability for yards and commercial spaces.
Operating Instructions
Once installed and wired correctly, the ledmo 120W LED Wall Pack Light operates via a standard electrical switch. Some models may include a photocell for automatic dusk-to-dawn operation (if specified in your product variant).
- Manual Control: Use the connected wall switch to turn the light ON or OFF.
- Photocell Operation (if applicable): If your model includes a photocell, the light will automatically turn on when ambient light levels drop (dusk) and turn off when light levels rise (dawn). Ensure the photocell is not obstructed.
Image: The ledmo 120W LED Wall Pack Light provides extensive and bright illumination for large outdoor areas.
Image: The wide-beam optics ensure broad light distribution, covering significant distances from the mounting point.
Maintenance
The ledmo 120W LED Wall Pack Light is designed for minimal maintenance due to its durable construction and long-lasting LED components.
- Cleaning: Periodically clean the lens and housing with a soft, damp cloth to remove dirt, dust, or debris that may accumulate and affect light output. Do not use abrasive cleaners.
- Inspection: Annually inspect the fixture for any signs of damage, loose wiring, or corrosion. Ensure all mounting screws remain tight.
- Waterproof Seal: The fixture features an IP65 waterproof rating. Avoid disassembling the sealed components, as this may compromise the waterproof integrity.
Image: The IP65 waterproof design ensures the fixture's durability and performance in various outdoor weather conditions.
Troubleshooting
If you encounter issues with your ledmo LED Wall Pack Light, refer to the following common troubleshooting steps:
- Light Not Turning On:
- Check the circuit breaker to ensure power is supplied to the fixture.
- Verify all wiring connections are secure and correct.
- If equipped with a photocell, ensure it is not covered or obstructed, which might prevent it from activating at dusk.
- Light Flickers:
- Check for loose wiring connections.
- Ensure the voltage supply is stable and within the specified range.
- Reduced Brightness:
- Clean the lens and housing to remove any accumulated dirt or debris.
- Ensure the fixture is receiving adequate power.
If these steps do not resolve the issue, please contact customer support.
Warranty Information
The ledmo 120W LED Wall Pack Light comes with a Limited Warranty. Please refer to the product packaging or contact ledmo customer support for specific terms and conditions regarding your warranty coverage.
Customer Support
For further assistance, technical support, or warranty claims, please contact ledmo customer service through the retailer where the product was purchased or visit the official ledmo website.
Manufacturer: targetlighting