1. Introduction
Thank you for choosing the Hoco A13 Anti-Spy Tempered Glass Screen Protector. This product is designed to provide superior protection for your iPhone XR or iPhone 11 screen while ensuring your privacy. It features high-quality materials and advanced technology to safeguard your device from scratches, impacts, and unwanted viewing angles.
2. Safety Information
- Handle the screen protector with care to avoid bending or cracking before installation.
- Keep out of reach of children.
- Do not attempt to reapply the screen protector multiple times as this may reduce adhesion and effectiveness.
- Dispose of damaged screen protectors responsibly.
3. Package Contents
Please verify that all items are present in the package:
- Hoco A13 Anti-Spy Tempered Glass Screen Protector (1 unit)
- Cleaning Kit (Alcohol wipe, microfiber cloth, dust removal sticker)
4. Installation Guide
Follow these steps carefully for optimal installation:
- Prepare Your Workspace: Choose a clean, dust-free environment with good lighting.
- Clean Your Phone Screen:
- Turn off your device.
- Use the provided alcohol wipe to thoroughly clean the screen surface.
- Wipe the screen dry with the microfiber cloth until no streaks or smudges remain.
- Use the dust removal sticker to pick up any remaining dust particles. Ensure the screen is perfectly clean.
- Align the Screen Protector:
- Carefully peel off the protective film from the adhesive side of the screen protector (usually marked "1" or "Back"). Avoid touching the adhesive surface.
- Align the screen protector with your phone's screen, paying close attention to the cutouts for the speaker, camera, and sensors.
- Once aligned, gently lower the screen protector onto the screen.
- Apply and Remove Bubbles:
- The adhesive will start to spread automatically. If not, gently press the center of the screen protector.
- Use the microfiber cloth or a soft card (not included) to push any air bubbles towards the edges of the screen. Small bubbles should disappear within 24-48 hours.
Note: The product images provided in the source data depict a phone case and are not relevant to the installation of this screen protector. Please refer to the text instructions for accurate guidance.
5. Operating Instructions and Features
The Hoco A13 screen protector enhances your device's functionality and privacy:
- Anti-Spy Privacy Protection: The screen protector features a specialized filter that limits the viewing angle of your screen. Content is only visible to those directly in front of the screen, preventing others from peeking at your private information from the sides.
- 3D Touch Compatibility: Designed to maintain full responsiveness, allowing seamless use of your iPhone's 3D Touch features without any interference.
- Anti-Fingerprint Layer: The vacuum plating anti-fingerprint layer significantly reduces smudges and fingerprints, keeping your screen clear and clean.
- Double Reinforcement & Anti-Breakage Edges: Constructed with high alumina glass and double reinforcement, this protector offers enhanced durability and resistance to edge chipping, providing robust protection against drops and impacts.
- Water Resistant: Provides an additional layer of resistance against splashes and moisture, complementing your phone's existing water resistance.
6. Maintenance and Care
- Cleaning: Use a soft, lint-free cloth, preferably the provided microfiber cloth, to gently wipe the screen protector. For stubborn smudges, slightly dampen the cloth with water or a screen cleaner designed for electronics.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, alcohol (other than the initial cleaning wipe), or solvents on the screen protector, as these can damage the anti-fingerprint coating.
- Protect from Sharp Objects: While highly durable, avoid direct contact with extremely sharp objects to prevent scratches.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Air bubbles after installation | Dust particles or uneven application. | Gently push bubbles towards the edge with a microfiber cloth. Small bubbles usually disappear within 24-48 hours. For large bubbles caused by dust, carefully lift the nearest corner of the protector with a dust removal sticker, remove the dust, and reapply. |
| Screen protector not adhering properly | Screen not cleaned thoroughly, or adhesive touched during installation. | Ensure the screen is perfectly clean before application. If adhesion is poor, it may be necessary to replace the protector. |
| Reduced touch sensitivity | Incorrect installation or a faulty protector. | Ensure the protector is correctly aligned and fully adhered. If issues persist, contact customer support. |
| Privacy feature not working as expected | Incorrect viewing angle expectation. | The anti-spy feature works by limiting side viewing angles. Direct viewing should be clear. Adjust your viewing angle to confirm the privacy effect. |
8. Specifications
- Brand: Hoco
- Model: A13
- Product Type: Anti-Spy Tempered Glass Screen Protector
- Compatible Devices: Mobile Phones
- Compatible Phone Models: iPhone XR, iPhone 11
- Material: High Alumina Tempered Glass
- Special Features: Anti-Spy, Water Resistant, Anti-Fingerprint, Double Reinforcement, Anti-Breakage Edges, 3D Touch Support
- Included Components: Screen Protector, Cleaning Kit
9. Warranty and Support
This product is covered by a standard manufacturer's warranty. For warranty claims, technical support, or any inquiries regarding your Hoco A13 screen protector, please contact your retailer or visit the official Hoco website for customer service information. Please retain your proof of purchase for warranty purposes.