Thumbs Up BATHLGHT
Thumbs Up! Mood Light User Manual
Model: BATHLGHT
Introduction
This manual provides essential information for the safe and effective use of your Thumbs Up! Mood Light. Please read these instructions carefully before use and retain them for future reference.
Important Safety Information
- Ensure the battery compartment is securely sealed before placing the light in water to prevent water ingress.
- Do not submerge the light beyond its intended depth.
- Keep out of reach of small children when not in use.
- Do not mix old and new batteries, or different types of batteries.
- Dispose of used batteries responsibly according to local regulations.
- Do not attempt to disassemble or modify the device.
Package Contents
- 1 x Thumbs Up! Mood Light
- (Batteries are not included)
Setup
1. Battery Installation
- Locate the battery compartment cover on the underside of the mood light.
- Carefully twist or unclip the cover to open it.
- Insert 3 x AAA batteries (not included) into the compartment, ensuring correct polarity (+/-).
- Securely close the battery compartment cover, ensuring it is tightly sealed to maintain water resistance.
Image: The product packaging for the Thumbs Up! Mood Light. The box is teal and black, displaying the product name "Bathlight" and key features such as "Waterproof bath light," "Floats on water," and "Requires 3 x AAA batteries (not included)." A small image of the light in water is visible on the front.
Operating Instructions
Turning On/Off
- To turn on the mood light, press the power button located on the device.
- The light will begin to cycle through its multi-coloured LED effects.
- To turn off the mood light, press the power button again.
Using in Water
- Ensure the battery compartment is securely sealed before placing the light in water.
- The mood light is designed to float on water. Gently place it on the surface of your bath water.
- The light will slowly cycle through a full spectrum of colours, creating a relaxing atmosphere.
- The integrated suction cup can be used to affix the light to the side of the bath if desired, providing stability.
Maintenance
- After each use, remove the mood light from water and gently wipe it dry with a soft cloth.
- Do not use abrasive cleaners or solvents on the device.
- Store the mood light in a dry place when not in use.
- If the light will not be used for an extended period, remove the batteries to prevent leakage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Batteries are dead or incorrectly installed. | Replace batteries with new ones, ensuring correct polarity. |
| Light flickers or dims. | Low battery power. | Replace batteries. |
| Water inside battery compartment. | Battery cover not sealed properly. | Ensure cover is tightly sealed before use. If water has entered, remove batteries, dry compartment thoroughly, and allow to air dry before re-inserting batteries. Discard if damage is evident. |
Specifications
- Model: BATHLGHT
- Brand: Thumbs Up
- Power Source: 3 x AAA Batteries (not included)
- Material: Plastic
- Dimensions: 8 x 8 x 3 cm (LxWxH)
- Weight: 72 g
- Features: LED mood light with colour changing effect, Water resistant, Floats on water, Includes suction cup.
Warranty and Support
For any product inquiries, technical support, or warranty information, please contact your retailer or the manufacturer directly. Please retain your proof of purchase for warranty claims.
Manufacturer: Thumbs Up
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.