VIVO STAND-V102F Dual Monitor Free-Standing Desk Mount

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your VIVO STAND-V102F Dual Monitor Free-Standing Desk Mount. This mount is designed to hold two flat or curved display screens ranging from 13 to 30 inches, with a maximum weight capacity of 17.6 lbs per screen. It supports VESA mounting patterns of 75x75mm or 100x100mm.

Safety Warning:

• Ensure all components are securely fastened before use.
• Do not exceed the maximum weight capacity of 17.6 lbs per screen.
• Avoid pulling monitors too far forward or backward unless the stand is bolted down, as this may compromise stability.
• Always check that the base size fits your available desk space to prevent tipping.

2. Package Contents

Please verify that all components listed below are present in your package. If any parts are missing or damaged, contact VIVO customer support.

• Heavy-Duty Base (11" x 15.4")
• Center Pole (16.4" height)
• Dual Monitor Arms with VESA Plates
• Cable Management Clips
• All necessary hardware (screws, washers, Allen keys)

3. Assembly Instructions

Follow these steps to assemble your VIVO Dual Monitor Free-Standing Desk Mount.

1. Attach the Center Pole to the Base: Securely fasten the center pole to the heavy-duty base using the provided screws and Allen key. Ensure it is stable.
2. Install Monitor Arms: Slide the dual monitor arms onto the center pole. Adjust their height to your preference and tighten the locking mechanism.
3. Attach VESA Plates to Monitors: Remove the VESA plates from the monitor arms. Attach these plates to the back of your monitors using the appropriate screws for your monitor's VESA pattern (75x75mm or 100x100mm).
4. Mount Monitors: Carefully slide the monitors (with attached VESA plates) onto the monitor arms. Ensure they click securely into place.
5. Cable Management: Utilize the included cable management clips to route and organize your monitor cables along the arms and down the center pole for a tidy setup.

Figure 1: Assembled VIVO Dual Monitor Free-Standing Desk Mount with monitors.

Figure 2: Detail of VESA plate for monitor attachment.

4. Operating Instructions

The VIVO STAND-V102F offers full articulation for optimal viewing angles.

• Height Adjustment: Loosen the clamp on the center pole to slide the monitor arms up or down. Re-tighten the clamp firmly once the desired height is achieved.
• Tilt Adjustment: Monitors can be tilted +45° to -45°. Adjust the tilt knob on the VESA plate to achieve your preferred vertical viewing angle.
• Swivel Adjustment: The monitor arms allow for 180° swivel, enabling you to adjust the horizontal angle of each monitor independently.
• Rotation: Monitors can be rotated 360° for portrait or landscape orientation. Simply turn the monitor to the desired orientation.
• Arm Articulation: The double center arm joints provide additional articulation, allowing for flexible monitor placement and positioning.

Figure 3: Full articulation features including tilt, swivel, and rotation.

Figure 4: Example of monitors in both portrait and landscape orientations.

5. Features

• Universal Compatibility: Fits two screens from 13" to 30" and up to 17.6 lbs each. Supports VESA 75x75mm or 100x100mm mounting patterns.
• Full Articulation: Offers +45° to -45° tilt, 180° swivel, and 360° rotation for flexible viewing.
• Height Adjustment: Monitors can be adjusted along the 16.4" center pole.
• Heavy-Duty Base: A solid steel 11" x 15.4" base ensures stability for your monitor setup.
• Integrated Cable Management: Clips are included to keep cables organized and out of sight.

Figure 5: Key dimensions and compatibility information.

Figure 6: The heavy-duty base providing stability.

Figure 7: Integrated cable management system.

6. Specifications

7. Maintenance

To ensure the longevity and optimal performance of your VIVO monitor mount, follow these maintenance guidelines:

• Regular Cleaning: Wipe down the mount with a soft, damp cloth to remove dust and debris. Avoid abrasive cleaners or solvents.
• Check Fasteners: Periodically inspect all screws and bolts to ensure they remain tight. Re-tighten as necessary to maintain stability.
• Lubrication: If any joints become stiff, a small amount of silicone-based lubricant can be applied to the moving parts.

8. Troubleshooting

If you encounter any issues with your monitor mount, refer to the following common problems and solutions:

• Mount is Unstable/Tipping:
  • Ensure the heavy-duty base is fully on a flat, stable surface.
  • Verify that the combined weight of your monitors does not exceed the maximum capacity.
  • Avoid extending monitors too far forward or backward from the center pole without securing the base to the desk (if applicable).
• Monitors Sagging/Not Holding Position:
  • Tighten the tilt adjustment knob on the VESA plate.
  • Ensure all arm joints are securely tightened with the provided Allen key.
• Difficulty Adjusting Tilt:
  • Some tilt bolts may require a specific Allen key or tool for proper tightening/loosening. Refer to the assembly diagram for exact locations.
  • Ensure the monitor is not exceeding the weight limit, which can make adjustments difficult.

9. Official Product Videos

10. Warranty and Support

VIVO products are backed by a manufacturer's warranty. For specific warranty details, product registration, or technical support, please visit the official VIVO website or contact their customer service department. Keep your purchase receipt for warranty claims.

VIVO is a US-based company committed to providing quality ergonomic solutions. Their sales and technical support teams are available to assist with any product-related inquiries.

Figure 8: VIVO's commitment to customer support.