Franke PT14-31S Stainless Steel Shelf Instruction Manual

Product Overview

The Franke PT14-31S Shelf is a versatile accessory designed to integrate seamlessly with the Franke Integral Ledge System in compatible sinks. Constructed from durable stainless steel, this shelf provides an elevated surface within your sink for various kitchen tasks. Its design includes rubber bumpers to ensure stability and protect your sink from scratches.

Image: The Franke PT14-31S stainless steel shelf, showcasing its design and rubber bumpers.

Key Features:

• Material: High-quality stainless steel construction for durability and hygiene.
• Protection: Equipped with rubber bumpers to prevent movement and protect sink surfaces.
• Versatility: Ideal for draining dishes, preparing food, or storing items within the sink.
• Compatibility: Specifically designed for use with Franke Pecera sinks.
• Dimensions: Approximately 14 inches by 16.125 inches.

Setup Instructions

The Franke PT14-31S Shelf is designed for simple placement within your compatible Franke Pecera sink. No complex assembly is required.

1. Unpack: Carefully remove the shelf from its packaging. Inspect for any shipping damage.
2. Position: Place the stainless steel shelf directly onto the integral ledge system of your Franke Pecera sink. Ensure the rubber bumpers are in contact with the sink surface to provide stability and prevent scratching.
3. Verify Fit: Confirm that the shelf sits securely and level within the sink's ledge.

Image: The Franke PT14-31S shelf positioned within a Franke Pecera sink, demonstrating proper placement on the integral ledge.

Operating Instructions

The PT14-31S shelf enhances the functionality of your sink by providing a raised, stable surface for various kitchen activities.

• Dish Draining: Use the shelf to air-dry washed dishes, glasses, and cutlery. The open grid design allows for efficient water drainage directly into the sink. The unique design also allows plates to be stored upright for quicker drying.
• Food Preparation: Utilize the shelf as a convenient workstation for preparing fruits, vegetables, or other food items. This keeps your countertops clear and allows for easy rinsing and waste disposal directly into the sink below.
• Pot and Pan Support: The sturdy stainless steel construction can support pots and pans, making it useful for soaking, rinsing, or temporary storage above the sink basin.

Image: The Franke PT14-31S shelf supporting a pot, illustrating its utility for various kitchen tasks.

Maintenance and Care

To ensure the longevity and appearance of your Franke PT14-31S Stainless Steel Shelf, follow these simple care instructions:

• Regular Cleaning: Clean the shelf regularly with warm water and a mild dish soap. Use a soft cloth or sponge to wipe down all surfaces.
• Rinsing: Thoroughly rinse the shelf with clean water after washing to remove all soap residue.
• Drying: Dry the shelf immediately with a soft, clean cloth to prevent water spots and maintain its luster. Air drying can lead to mineral deposits, especially in hard water areas.
• Avoid Harsh Cleaners: Do not use abrasive cleaners, steel wool, scouring pads, or harsh chemical detergents, as these can scratch or damage the stainless steel finish.
• Rubber Bumpers: Periodically check the rubber bumpers for wear and tear. Ensure they are securely in place to continue protecting your sink.

Troubleshooting

If you encounter any issues with your Franke PT14-31S Shelf, consider the following common solutions:

• Shelf is unstable or moves: Ensure the shelf is correctly seated on the integral ledge system of your Franke Pecera sink. Check that all rubber bumpers are present and properly attached.
• Water spots or streaks appear: This is common with stainless steel, especially in areas with hard water. Always dry the shelf immediately after cleaning with a soft cloth. For stubborn spots, a stainless steel cleaner can be used, following the product's instructions.
• Scratches on the sink: Verify that the rubber bumpers are intact and positioned correctly. The bumpers are designed to prevent direct metal-to-metal contact. If bumpers are missing or damaged, contact Franke support for replacements.

Product Specifications

Warranty and Support

For specific warranty information regarding your Franke PT14-31S Shelf, please refer to the documentation included with your original purchase or visit the official Franke website. For technical support, replacement parts, or further assistance, please contact Franke customer service directly.

Franke Official Website: www.franke.com