1. Important Safety Information
Please read this manual carefully before assembly and use. Failure to follow these instructions may result in injury or damage to the product.
Warning:
The pavilion does not offer protection during storms or very bad weather conditions. Do not use the pavilion or leave it outdoors in such conditions to avoid damage.
Always ensure the pavilion is securely anchored to the ground using the provided ropes and pegs.
Do not use open flames or heating devices inside or near the pavilion.
Keep children and pets away from the assembly area.
2. Package Contents
Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, please contact tectake customer service.
- Pavilion frame with roof cover
- Tension ropes
- Ground pegs
- Assembly instructions (this manual)
Figure 2.1: Overview of included components, including frame connectors, velcro straps for securing the cover, ground pegs, and tension ropes for stability.
3. Assembly Instructions
Assembly is quick and requires no tools. It is recommended that two people assemble the pavilion for ease and safety.
3.1. Frame Setup
- Unpack all frame components and lay them out on a flat, clear surface.
- Connect the metal poles according to the diagram. The poles simply slide and click into place. Ensure all connections are secure.
- Once the base frame is assembled, attach the vertical support poles.
Figure 3.1: The pavilion frame fully assembled, ready for the roof cover.
3.2. Attaching the Roof Cover
- Carefully unfold the polyethylene roof cover.
- Drape the roof cover over the assembled frame, ensuring it is centered.
- Secure the roof cover to the frame using the integrated velcro straps. Ensure all straps are firmly attached to prevent the cover from shifting.
Figure 3.2: The pavilion with the roof cover installed, viewed from an angle.
3.3. Securing the Pavilion
- Attach the tension ropes to the designated loops on the pavilion corners.
- Drive the ground pegs into the soil at an angle, approximately 45 degrees, away from the pavilion legs.
- Tie the tension ropes to the ground pegs, ensuring they are taut to provide maximum stability.
Figure 3.3: The pavilion fully assembled and secured in a garden, demonstrating its use as a shaded area.
4. Operating Instructions
The tectake pavilion is designed for temporary outdoor use, providing shade and light rain protection.
- Usage Environment: Ideal for gardens, parties, camping trips, and festivals.
- Weather Conditions: This pavilion is intended for use in calm weather. It is not designed to withstand strong winds, heavy rain, or snow. In adverse weather, disassemble and store the pavilion to prevent damage.
- Stability: Always ensure the pavilion is properly anchored with all tension ropes and ground pegs.
5. Maintenance and Storage
Proper maintenance and storage will extend the lifespan of your pavilion.
- Cleaning: Clean the polyethylene cover with a damp cloth and mild soap. Do not use harsh chemicals or abrasive cleaners. Allow the cover to dry completely before storage to prevent mildew.
- Frame Care: Wipe down metal frame components with a dry cloth. If any rust appears, clean it and apply a rust-inhibiting paint.
- Disassembly: Disassemble the pavilion in reverse order of assembly.
- Storage: Store all components in a dry, cool place, away from direct sunlight and extreme temperatures. The compact design allows for space-saving storage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pavilion is unstable. | Not properly anchored; loose connections. | Ensure all tension ropes are taut and pegs are firmly in the ground. Check all frame connections are clicked into place. |
| Water pooling on roof. | Insufficient tension on roof cover; heavy rain. | Adjust roof cover tension. This pavilion is not designed for heavy rain; disassemble if significant rainfall is expected. |
| Frame components do not fit. | Incorrect orientation; minor manufacturing variance. | Double-check the assembly diagram. If a component is slightly bent, gently straighten it. Contact customer service if parts are severely damaged. |
7. Specifications
| Feature | Detail |
|---|---|
| Dimensions (L x W): | Approx. 3 x 3 m (9.8 x 9.8 ft) |
| Total Dimensions (L x W x H): | Approx. 3 x 3 x 2.50 m (9.8 x 9.8 x 8.2 ft) |
| Pole Diameter: | Approx. 2 cm (0.8 in) |
| Material (Cover): | Polyethylene |
| Material (Frame): | Coated Metal Pipe |
| Weight: | Approx. 5.2 kg (11.5 lbs) |
| Color: | White |
Figure 7.1: Detailed dimensions of the tectake pavilion.
8. Warranty and Support
For warranty information or technical support, please contact tectake customer service. Keep your proof of purchase for any warranty claims.
You can find more information and contact details on the official tectake website: www.tectake.de
