Honda 08T22-T5A-001B

Honda Fit Wiper Blade Set (Model 08T22-T5A-001B) Instruction Manual

For Honda Fit models from 2017.6 and later specifications.

1. Product Overview

This manual provides essential instructions for the installation, operation, and maintenance of your Honda Fit Wiper Blade Set, model 08T22-T5A-001B. This set is designed to provide clear visibility in various weather conditions for compatible Honda Fit vehicles.

Image showing three Honda Fit wiper blades: one long for the driver's side, one medium for the passenger's side, and one short for the rear window.

Figure 1: Components of the Honda Fit Wiper Blade Set. The image displays three distinct wiper blades: a longer blade for the driver's side, a medium-sized blade for the passenger's side, and a shorter blade specifically for the rear window.

2. Setup and Installation

Proper installation ensures optimal performance and safety. Follow these steps carefully:

  1. Prepare the Vehicle: Park the vehicle on a level surface, turn off the ignition, and engage the parking brake. Lift the wiper arms away from the windshield until they lock into the upright position.
  2. Remove Old Blades: Locate the small tab or button on the wiper blade connector. Press it and slide the old blade off the wiper arm hook. Some models may require a slight twist or specific release mechanism. Refer to your vehicle's owner's manual if unsure.
  3. Identify New Blades: The Honda Fit Wiper Blade Set (08T22-T5A-001B) includes specific blades for the driver's side, passenger's side, and rear window. Match each new blade to its corresponding position. The driver's side blade is typically longer than the passenger's side blade.
  4. Install New Blades: Slide the new wiper blade onto the wiper arm hook until it clicks securely into place. Ensure the blade is firmly attached and cannot be easily pulled off.
  5. Lower Wiper Arms: Gently lower the wiper arms back onto the windshield. Do not let them snap down, as this can damage the windshield.
  6. Test Functionality: Turn on the ignition and test the wipers on a wet windshield to ensure they operate smoothly and clear the glass effectively.

Note: Always ensure the windshield is wet before operating wipers to prevent damage to the blades or windshield.

3. Operating Instructions

Once installed, operate the wiper blades using your vehicle's standard wiper controls. Refer to your Honda Fit owner's manual for specific instructions on operating the intermittent, low, high, and mist settings.

  • Regular Use: Use wipers as needed during rain, snow, or when the windshield is dirty to maintain clear visibility.
  • Windshield Washer Fluid: Always use windshield washer fluid in conjunction with wipers to clean stubborn dirt or debris.

4. Maintenance

Regular maintenance extends the life of your wiper blades and ensures optimal performance:

  • Clean Blades Regularly: Wipe the rubber edge of the wiper blades with a damp cloth or paper towel to remove dirt, grime, and road film. This helps prevent streaking.
  • Inspect for Damage: Periodically check the rubber blades for cracks, tears, or hardening. Damaged blades should be replaced immediately.
  • Avoid Ice Scrapers: Do not use ice scrapers on the rubber portion of the wiper blades, as this can cause damage.
  • Winter Care: In freezing conditions, ensure blades are not frozen to the windshield before operating them. Gently lift them away from the glass if frozen.

5. Troubleshooting

If you experience issues with your wiper blades, consider the following:

  • Streaking:
    • Clean the wiper blades and windshield thoroughly.
    • Inspect blades for wear or damage; replace if necessary.
    • Ensure proper installation and contact pressure.
  • Chattering or Skipping:
    • Clean blades and windshield.
    • Check if the wiper arm is bent or if the blade is not sitting correctly.
    • Replace blades if the rubber is hardened or worn.
  • Noise (Squeaking/Screeching):
    • Ensure the windshield is sufficiently wet.
    • Clean blades and windshield.
    • Check for proper blade angle and arm tension.

If problems persist after troubleshooting, consult a qualified automotive technician.

6. Specifications

FeatureDetail
BrandHonda
Model Number08T22-T5A-001B
Mounting TypePinch Tab
CompatibilityHonda Fit (2017.6-Specification Changes)
ManufacturerHONDA
ASINB073Q619VM

7. Warranty and Support

For warranty information and customer support regarding your Honda Fit Wiper Blade Set, please refer to the documentation provided with your purchase or contact your authorized Honda dealer or the seller directly. Keep your proof of purchase for any warranty claims.

Related Documents - 08T22-T5A-001B

Preview 2013 Honda Fit Owner's Manual - Comprehensive Guide to Operation and Features
The official owner's manual for the 2013 Honda Fit. This guide provides detailed information on vehicle operation, safety features, controls, audio system, driving, maintenance, and troubleshooting for your Honda Fit.
Preview 2017 Honda Fit Owner's Manual
Comprehensive owner's manual for the 2017 Honda Fit, covering safety features, driving instructions, controls, audio system operation, maintenance, and handling unexpected situations.
Preview 2006-2011 Honda Civic Brake, Reverse, and Side Light Bulb Replacement Guide
A step-by-step guide from iFixit on how to replace the brake, reverse, and side light bulbs for the 8th generation 2006-2011 Honda Civic.
Preview Honda Odyssey Wiper and Washer Controls: A Comprehensive Guide
Learn how to operate the front and rear wipers and washers on your Honda Odyssey. This guide covers automatic intermittent wipers, sensitivity settings, washer functions, and reverse operation.
Preview 2011 Honda Fit Owner's Manual
Comprehensive owner's manual for the 2011 Honda Fit, covering vehicle operation, safety features, maintenance, controls, and technical specifications. Includes important safety warnings and information.
Preview 1999-2004 Honda Odyssey Thermostat Replacement Guide
Step-by-step instructions for replacing the thermostat in a 1999-2004 Honda Odyssey 3.5L V6. This guide details the necessary tools and parts for the repair.