This owner's manual covers all models of your vehicle. You may find descriptions of equipment and features that are not on your particular model.
This owner's manual covers all models of your vehicle. You may find ... Warranty Coverages P. 275. Online Reference Owner's Manual. 2013 Fit.
This owner’s manual should be considered a permanent part of the vehicle and should ... This owner’s manual covers all models of your vehicle. You may find descriptions of...
Contents
2013 Fit
Online Reference Owner's Manual
This owner's manual should be considered a permanent part of the vehicle and should remain with the vehicle when it is sold.
This owner's manual covers all models of your vehicle. You may find descriptions of equipment and features that are not on your particular model.
Images throughout this owner's manual (including the front cover) represent features and equipment that are available on some, but not all, models. Your particular model may not have some of these features.
This owner's manual is for vehicles sold in the United States and Canada.
The information and specifications included in this publication were
in effect at the time of approval for printing. Honda Motor Co., Ltd.
reserves the right, however, to discontinue or change specifications
or design at any time without notice and without incurring any
obligation.
Navigation Key
QRG Quick Reference Guide
TOC Chapter Table of Contents
Index Index
Home Book Table of Contents
0031-TK6-6400 © American Honda Motor Co., Inc. - All Rights Reserved
2 Safe Driving P. 21
For Safe Driving P. 22
Seat Belts P. 26
Airbags P. 34
2 Instrument Panel P. 63
Indicators P. 64
Gauges and Displays P. 72
2 Controls P. 75
Setting the Clock P. 76 Locking and Unlocking the Doors P. 77 Opening and Closing the Windows P. 92 Adjusting the Seats P. 103
2 Features P. 121
Audio System P. 122 Bluetooth® HandsFreeLink®* P. 140
Audio System Basic Operation P. 125
2 Driving P. 153
Before Driving P. 154 Refueling P. 186
Towing a Trailer P. 159 Fuel Economy P. 189
2 Maintenance P. 191
Before Performing Maintenance P. 192 Maintenance MinderTM P. 195 Checking and Maintaining Wiper Blades P. 218 Heating and Cooling* System Maintenance P. 233
2 Handling the Unexpected P. 237
Tools P. 238
If a Tire Goes Flat P. 239
Overheating P. 254
Indicator, Coming On/Blinking P. 256
2 Information P. 267
Specifications P. 268 Emissions Testing P. 273
Identification Numbers P. 270 Warranty Coverages P. 275
* Not available on all models
Child Safety P. 49
Exhaust Gas Hazard P. 61
Safety Labels P. 62
Opening and Closing the Tailgate P. 88 Operating the Switches Around the Steering Wheel P. 94 Interior Lights/Interior Convenience Items P. 111
Security System P. 90 Adjusting the Mirrors P. 102 Heating and Cooling* P. 118
Audio Error Messages P. 135
General Information on the Audio System P. 137
When Driving P. 161 Accessories and Modifications P. 190
Braking P. 181
Parking Your Vehicle P. 185
Maintenance Under the Hood P. 199 Checking and Maintaining Tires P. 222 Cleaning P. 234
Replacing Light Bulbs P. 212 Battery P. 231
Remote Transmitter Care* P. 232
Engine Does Not Start P. 250 Fuses P. 260
Jump Starting P. 251 Emergency Towing P. 264
Shift Lever Does Not Move P. 253
Devices that Emit Radio Waves P. 271 Authorized Manuals P. 277
Reporting Safety Defects P. 272 Customer Service Information P. 278
Contents
2013 Fit
Quick Reference Guide P. 2 Safe Driving P. 21
Instrument Panel P. 63 Controls P. 75 Features P. 121 Driving P. 153
Maintenance P. 191 Handling the Unexpected P. 237
Information P. 267 Index P. 279
* Not available on all models
Quick Reference Guide - 2013 Fit
Quick Reference Guide
Visual Index
QRG
Index Home
2
Door Mirror Controls (P102)
System Indicators (P64) Gauges (P72) Information Display (P73) Hazard Warning Button
Audio System (P122) Navigation System*
() See Navigation System Manual
Rear Window Defogger (P100) Heated Mirror Button* (P100)
Heating and Cooling* System
(P118)
Ignition Switch (P94) Steering Wheel Adjustments
(P101)
(Vehicle Stability Assist (VSA®)
System OFF) Button (P176)
* Not available on all models
Quick Reference Guide - 2013 Fit
QRG
Headlights/Turn Signals (P95) Fog Lights* (P96)
Paddle Shifter (Shift Down)* (P 170)
(Select/Reset) Knob (P73) Brightness Control (P99)
Paddle Shifter (Shift Up)* (P170)
Wipers/Washers (P97)
Cruise Control Buttons* (P173) Horn (Press an area around .) Bluetooth® HandsFreeLink® System*
(P140)
Navigation System Voice Control Buttons*
() See Navigation System Manual
Audio Remote Control Buttons*
() See Navigation System Manual
Index
Home
* Not available on all models 3
Quick Reference Guide - 2013 Fit
Visual Index
QRG
Power Window Switches (P92) Power Door Lock Master Switch* (P82)
Interior Fuse Box (P261)
Driver's Front Airbag (P37)
Rearview Mirror (P102) Accessory Power Socket
(P115)
Passenger's Front Airbag
(P37)
Auxiliary Input Jack (P123) Glove Box (P113)
Index
Home
4
Shift Lever
Automatic Transmission
(P164)
Manual Transmission
(P171)
Parking Brake (P181)
Hood Release Handle (P200)
* Not available on all models
Quick Reference Guide - 2013 Fit
Seat Belt with Detachable Anchor (P31)
QRG
Seat Belt (Installing a Child Seat) (P56)
Seat Belt to Secure a Child Seat (P57) Side Curtain Airbags (P44) Coat Hook (P116) Grab Handle
Seat Belts (P26) Ceiling Light (P111) Map Lights* (P111)
Sun Visors Vanity Mirrors
USB Adapter Cable*
(P123)
Side Airbags (P41)
Rear Side Pocket (Right Side) Cargo Area Light (P112) Cargo Floor Box* (P115)
Rear Seat (P108) LATCH to Secure a
Child Seat (P54)
Front Seat (P103)
Index
Home
* Not available on all models 5
Quick Reference Guide - 2013 Fit
Visual Index
QRG
Index Home
6
Maintenance Under the Hood (P199) Audio Antenna (P124)
Windshield Wipers (P97) (P218) Power Door Mirrors (P102) Door Lock/Unlock Control (P79) Headlights (P95) (P212) Front Turn Signal/Parking/Side Marker Lights
(P95, ) (P213) (P214)
Tires (P222) (P239) Fog Lights* (P96) (P214)
How to Refuel (P187) High-Mount Brake Light (P217)
Rear Wiper (P98) (P2. 20)
Opening/Closing the Tailgate
(P88)
Tailgate Open Handle (P89) Brake/Taillights (P216) Back-Up Lights (P216) Rear Turn Signal Lights (P216)
* Not available on all models
Quick Reference Guide - 2013 Fit
Safe Driving (P 21)
QRG
Airbags (P34)
Your vehicle is fitted with airbags to help protect you and your passengers during a moderate-to-severe collision.
Child Safety (P49)
All children 12 and younger should be seated in the rear seat. Smaller children should be properly restrained in a forward-facing child seat. Infants must be properly restrained in a rear-facing child seat.
Exhaust Gas Hazard (P61)
Your vehicle emits dangerous exhaust gases that contain carbon monoxide. Do not run the engine in confined spaces where carbon monoxide gas can accumulate.
Seat Belts (P26)
Before Driving Checklist (P154)
Fasten your seat belt and sit upright well back in the seat.
Check that your passengers are wearing their seat belts correctly.
Before driving, check that the front seats, head restraints, steering wheel, and mirrors have been properly adjusted.
Fasten your lap belt as low as possible.
Index
Home
7
Instrument Panel (P63)
QRG
Gauges (P72)/Information Display (P73)/System Indicators (P64)
Quick Reference Guide - 2013 Fit
Index
Home
8
Lights Reminders
Fog Light Indicator*
High Beam Indicator
Lights On Indicator
System Indicators
Malfunction Indicator Lamp
Charging System Indicator
Low Oil Pressure Indicator
High Temperature Indicator
Low Temperature Indicator Vehicle Stability Assist (VSA®) System Indicator
VSA® OFF Indicator
Electric Power Steering (EPS) Indicator
Security System Alarm Indicator*
System Indicators
Fuel Gauge
Speedometer
Tachometer
System Indicators
Daytime Running Lights Indicator*
Maintenance Minder Indicator
Turn Signal and Hazard Warning Indicators
Shift Lever Position Indicator*
System Indicators
CRUISE MAIN Indicator *
CRUISE CONTROL Indicator *
U.S. models only
Low Tire Pressure Indicator
U.S. Canada
Side Airbag Off Indicator
U.S. models only
TPMS Indicator
Supplemental Restraint System Indicator
Immobilizer System Indicator
Seat Belt Reminder Indicator
Door and Tailgate Open Indicator
Washer Level Indicator *
Anti-lock Brake System (ABS) Indicator
U.S. Canada
Parking Brake and Brake System Indicator
Low Fuel Indicator
* Not available on all models
Controls (P75)
Turn Signals (P95)
Turn Signal Control Lever Right
Left
Lights (P95)
Light Control Switches High Beam
Low Beam
Flashing
Quick Reference Guide - 2013 Fit
Wipers and Washers
QRG
(P97)
Wiper/Washer Control Lever
Pull toward you to spray washer fluid.
MIST OFF INT: Low speed with intermittent LO: Low speed wipe HI: High speed wipe
Index
Home
9
Quick Reference Guide - 2013 Fit
Steering Wheel (P101)
Power Door Mirrors
QRG
To adjust, pull the adjustment lever towards you, adjust to the desired position, then lock the lever back in place.
(P102)
With the ignition switch in ON (w, move the selector switch to L or R.
Push the appropriate edge of the adjustment switch to adjust the mirror.
Selector Switch
Power Windows (P92)
With the ignition switch in ON (w, open and close the power windows.
If the power window lock button is in the off position, each passenger's window can be opened and closed with its own switch.
If the power window lock button is in the on position, each passenger's window switch is disabled.
Power Window Lock Button
Tailgate (P88)
Adjustment Switch
Window Switch
Index
To open the tailgate, pull the tailgate open handle, and lift up.
Home
10
Heating and Cooling* System (P118)
Rotate the fan control dial to adjust the fan speed. Rotate the Mode control dial ( / / / / ) to select the vents air flows
from. Rotate the temperature control dial to adjust the temperature. Rotate the fan control dial to OFF to turn the system off. Rotate the mode to defrost the windshield.
Fan Control Dial
Temperature Control Dial Mode Control Dial
(Rear Window Defogger/ Heated Mirror*) Button Fresh Air/Recirculation Lever
Quick Reference Guide - 2013 Fit
Clock (P76)
Models without navigation system
a Press the CLOCK button until the
displayed time begins flashing.
b Press the (1 (Hour) or (2 (Minute)
button to set the time. Press the (3 (Reset) button to set the time to the nearest hour.
c Press the CLOCK button again to set
the time.
QRG
Models with navigation system
The navigation system receives signals from GPS satellites, updating the clock automatically.
A/C (Air Conditioning) Button*
Air flows from dashboard vents.
Air flows from floor and dashboard vents.
Air flows from floor vents.
Air flows from floor and windshield defroster vents.
Air flows from windshield defroster vents.
Index
Home
* Not available on all models 11
Features (P121)
QRG
Audio System (P125) For navigation system operation () See Navigation System Manual
Quick Reference Guide - 2013 Fit
Audio Display CD Button
(Power) Button
Index
Home
12
Preset Buttons (1-6) FM/AM Button TITLE Button
(Sound) Button
(Seek) Button
Button
Button Selector Knob AUX Button
(CD Eject) Button RDM/A.SEL Button Auxiliary Input Jack RPT Button SCAN Button
(Seek) Button
Driving (P153)
Manual Transmission (P171)
Automatic Transmission (P165)
Shift to (P and depress the brake pedal when starting the engine.
Shifting
Models with Models without paddle shifter paddle shifter
Depress the brake pedal and press the release button to move out of (P. Move the shift lever without pressing the release button.
Press the release button to move the shift lever.
Shift Lever
Park Turn off or start the engine. Transmission is locked.
Paddle Shifters* (P169)
Paddle shifters allow you to shift gears much like a manual transmission (1st through 5th). This is useful for engine braking.
D-paddle shift mode: The transmission will shift back to automatic mode once the system detects that the vehicle
is cruising. Sequential shift mode: Holds the selected gear, and the M
indicator comes on.
(M Indicator
Selected Gear Number The selected gear position is shown in the instrument panel.
Paddle
Paddle
Shifter (- Shifter (+
Reverse Used when reversing.
Neutral Transmission is not locked.
Models without paddle shifter
Drive (D3) Used when: ·Going up or down hills
Release Button
Drive Normal driving. On models with paddle shifter, D-paddle shift mode can be used.
Models with paddle shifter
S Position Sequential shift mode can be used.
Second Used to increase engine braking (the transmission is locked in 2nd gear)
First Used to further increase engine braking (the transmission is locked in 1st gear)
Quick Reference Guide - 2013 Fit
QRG
Index Home
* Not available on all models 13
Quick Reference Guide - 2013 Fit
QRG
VSA® OFF Button (P177)
The vehicle stability assist (VSA®) system helps stabilize the vehicle during cornering, and helps maintain traction while accelerating on loose or slippery road surfaces.
VSA® comes on automatically every time you start the engine.
To turn VSA® on or off, press and hold the button until you hear a beep.
Cruise Control* (P173)
Cruise control allows you to maintain a set speed without keeping your foot on the accelerator pedal.
To use cruise control, press the CRUISE button, then press DECEL/SET once you have achieved the desired speed (above 25 mph or 40 km/h).
Tire Pressure Monitoring System (TPMS) (P178)
Refueling (P186)
Fuel recommendation: Unleaded gasoline with a pump octane number 87 or higher required
Fuel tank capacity: 10.6 US gal (40 L)
a Press on the edge of the
fuel fill door to make it pop up slightly.
b Turn the fuel fill cap
slowly to remove the cap.
c Place the cap in the
holder on the fuel fill door.
d After refueling, screw
the cap back on until it clicks at least once.
U.S. models only
TPMS monitors tire pressure. TPMS is turned on automatically every
time you start the engine.
Index
Home
14
* Not available on all models
Quick Reference Guide - 2013 Fit
Maintenance (P191)
Under the Hood (P199)
QRG
Check engine oil, engine coolant, and windshield washer fluid. Add when necessary.
Check brake fluid and clutch fluid. Check the battery condition monthly.
Wiper Blades (P218)
Replace blades if they leave streaks across the windshield.
a Pull the hood release handle under the corner of the
dashboard.
b Locate the hood latch lever, pull the lever up, and lift up
the hood.
Tires (P222)
Inspect tires and wheels regularly. Check tire pressures regularly. Install snow tires for winter
driving.
Lights (P212)
Inspect all lights regularly.
c When finished, close the hood and make sure it is firmly
locked in place.
Index
Home
15
Quick Reference Guide - 2013 Fit
Handling the Unexpected (P237)
QRG Flat Tire (P239)
Engine Won't Start (P250) Overheating (P254)
Park in a safe location and repair the flat tire with the compact spare tire*, or using the tire repair kit* in the cargo area.
If the battery is dead, jump start using a booster battery.
Park in a safe location. If you do not see steam under the hood, open the hood, and let the engine cool down.
Indicators Come On
(P256) Identify the indicator and consult the
owner's manual.
Blown Fuse (P260)
Check for a blown fuse if an electrical device does not operate.
Emergency Towing (P264)
Call a professional towing service if you need to tow your vehicle.
Index
Home
16
* Not available on all models
Quick Reference Guide - 2013 Fit
What to Do If
QRG
The ignition switch does not turn from (0 to (q. Why?
The steering wheel may be locked. Try to turn the steering wheel left and right
while turning the ignition key.
The ignition switch does not turn from (q to (0 and I cannot remove the key. Why?
The shift lever should be moved to (P.
Why does the brake pedal pulsate slightly when applying the brakes?
The rear door cannot be opened from inside the vehicle. Why?
This can occur when the ABS activates, and does not indicate a problem. Apply firm, steady pressure on the brake pedal. Never pump the brake pedal.
Check if the childproof lock is in the lock position. If so, open the rear door with the outside door handle. To cancel this function, push the lever to the unlock position.
Index
Home
17
Quick Reference Guide - 2013 Fit
Models with remote transmitter
QRG
Why do the doors lock
after I unlocked the doors
using a remote
transmitter?
If you do not open the doors within 30 seconds, the doors are relocked automatically for security.
Why does the beeper sound when I open the driver's door?
The beeper sounds when: The key is left in the ignition switch. The exterior lights are left on.
Why does the beeper sound when I start driving?
The beeper sounds when: Driver and/or front passenger are not wearing their seat belts. The parking brake lever is not fully released.
Why do I hear a screeching sound when I apply the brake pedal?
The brake pads may need to be replaced. Have your vehicle inspected by a dealer.
Index
Home
18
California Proposition 65 Warning
WARNING: This product contains or emits chemicals known to the state of California to cause cancer and birth defects or other reproductive harm.
Event Data Recorders
This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle's systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as: · How various systems in your vehicle were operating;
· Whether or not the driver and passenger safety belts were buckled/fastened;
· How far (if at all) the driver was depressing the accelerator
and/or brake pedal; and, · How fast the vehicle was traveling.
These data can help provide a better understanding of the circumstances in which crashes and injuries occur. NOTE: EDR data are recorded by your vehicle only if a non-trivial crash situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (e.g., name, gender, age, and crash location) are recorded. However, other parties, such as law enforcement, could combine the EDR data with the type of personally identifying data routinely acquired during a crash investigation.
To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that QRG have the special equipment, can read the information if they have access to the vehicle or the EDR.
The data belongs to the vehicle owner and may not be accessed by anyone else except as legally required or with the permission of the vehicle owner.
Service Diagnostic Recorders This vehicle is equipped with service-related devices that record information about powertrain performance. The data can be used to verify emissions law requirements and/or help technicians diagnose and solve service problems. It may also be combined with data from other sources for research purposes, but it remains confidential.
California Perchlorate Contamination Prevention Act The airbags, seat belt tensioners, and CR type batteries in this vehicle may contain perchlorate materials - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/
As you read this manual, you will find information that is preceded by a NOTICE symbol. This information is intended to help you avoid damage to your vehicle, other property, or the environment.
Index
Home
19
Quick Reference Guide - 2013 Fit
Quick Reference Guide - 2013 Fit
A Few Words About Safety
You will find this important safety information in a variety of forms,
including:
2013 Fit
QRG Your safety, and the safety of others, is very important. And operating this vehicle safely is an important responsibility.
Safety Labels - on the vehicle.
Safety Messages - preceded by a safety alert symbol 3 and
To help you make informed decisions about safety, we have provided operating procedures and other information on labels and
one of three signal words: DANGER, WARNING, or CAUTION. These signal words mean:
in this manual. This information alerts you to potential hazards that could hurt you or others.
3 DANGER
You WILL be KILLED or SERIOUSLY HURT if you don't follow instructions.
Of course, it is not practical or possible to warn you about all the hazards associated with operating or maintaining your vehicle. You must use your own good judgement.
3 WARNING 3 CAUTION
You CAN be KILLED or SERIOUSLY HURT if you don't follow instructions.
You CAN be HURT if you don't follow instructions.
Safety Headings - such as Important Safety Precautions. Safety Section - such as Safe Driving. Instructions - how to use this vehicle correctly and safely.
This entire book is filled with important safety information - please read it carefully.
Index
Home
20
2013 Fit
QRG
Safe Driving
You can find many safety recommendations throughout this chapter, and throughout this manual.
For Safe Driving Important Safety Precautions ............. 22 Your Vehicle's Safety Features............ 24
Seat Belts About Your Seat Belts........................ 26 Fastening a Seat Belt.......................... 29 Seat Belt Inspection............................ 33
Airbags Airbag System Components............... 34 Types of Airbags ................................ 37 Front Airbags (SRS) ............................ 37 Side Airbags....................................... 41
Side Curtain Airbags .......................... 44 Airbag System Indicators.................... 45 Airbag Care ....................................... 48 Child Safety Protecting Child Passengers ............... 49 Safety of Infants and Small Children .. 51 Safety of Larger Children ................... 59 Exhaust Gas Hazard Carbon Monoxide Gas....................... 61 Safety Labels Label Locations .................................. 62
Index
Home
21
For Safe Driving
QRG The following pages explain your vehicle's safety features and how to use them properly. The safety precautions below are ones that we consider to be among the
TOC most important.
2013 Fit
Safe Driving
Important Safety Precautions
Always wear your seat belt A seat belt is your best protection in all types of collisions. Airbags are designed to supplement seat belts, not replace them. So even though your vehicle is equipped with airbags, make sure you and your passengers always wear your seat belts, and wear them properly.
1Important Safety Precautions
Some states, provinces and territories prohibit the use of cell phones other than hands-free devices by the driver while driving.
Restrain all children Children age 12 and under should ride properly restrained in a back seat, not the front seat. Infants and small children should be restrained in a child seat. Larger children should use a booster seat and a lap/shoulder seat belt until they can use the belt properly without a booster seat.
Be aware of airbag hazards While airbags can save lives, they can cause serious or fatal injuries to occupants who sit too close to them, or are not properly restrained. Infants, young children, and short adults are at the greatest risk. Be sure to follow all instructions and warnings in this manual.
Index Home
Don't drink and drive Alcohol and driving don't mix. Even one drink can reduce your ability to respond to changing conditions, and your reaction time gets worse with every additional drink. So don't drink and drive, and don't let your friends drink and drive, either.
22
Pay appropriate attention to the task of driving safely Engaging in cell phone conversation or other activities that keep you from paying close attention to the road, other vehicles, and pedestrians could lead to a crash. Remember, situations can change quickly, and only you can decide when it is safe to divert some attention away from driving.
Control your speed Excessive speed is a major factor in crash injuries and deaths. Generally, the higher the speed, the greater the risk, but serious injuries can also occur at lower speeds. Never drive faster than is safe for current conditions, regardless of the maximum speed posted.
Keep your vehicle in safe condition Having a tire blowout or a mechanical failure can be extremely hazardous. To reduce the possibility of such problems, check your tire pressures and condition frequently, and perform all regularly scheduled maintenance.
uuFor Safe DrivinguImportant Safety Precautions
2013 Fit
QRG
TOC
Safe Driving
Index
Home
23
uuFor Safe DrivinguYour Vehicle's Safety Features
QRG Your Vehicle's Safety Features
TOC
9
8 12
9
Safe Driving
6 10 7
8 10
11
Index
Safety Cage
Crush Zones
7
Seats and Seat-Backs
Head Restraints
Collapsible Steering Column
6 Seat Belts
7 Front Airbags
8 Side Airbags
9 Side Curtain Airbags
10 Door Locks
11 Seat Belt Tensioners
12 Occupant Position Detection
System (OPDS) Sensor
The following checklist will help you take an active role in protecting yourself and your passengers.
Home
24
2013 Fit
1Your Vehicle's Safety Features Your vehicle is equipped with many features that work together to help protect you and your passengers during a crash.
Some features do not require any action on your part. These include a strong steel framework that forms a safety cage around the passenger compartment, front and rear crush zones, a collapsible steering column, and tensioners that tighten the front seat belts in a sufficient crash.
However, you and your passengers cannot take full advantage of these features unless you remain seated in the correct position and always wear your seat belts. In fact, some safety features can contribute to injuries if they are not used properly.
uuFor Safe DrivinguYour Vehicle's Safety Features
Safety Checklist
For the safety of you and your passengers, make a habit of checking these items each time before you drive. · After everyone has entered the vehicle, be sure all doors and the tailgate are
closed and locked. Locking the doors and the tailgate helps prevent an occupant from being ejected and an outsider from unexpectedly opening a door or the tailgate.
2 Locking/Unlocking the Doors from the Inside P. 82
· Adjust your seat to a position suitable for driving. Be sure the front seats are adjusted as far to the rear as possible while allowing the driver to control the vehicle. Sitting too close to a front airbag can result in serious or fatal injury in a crash.
2 Adjusting the Seats P. 103
· Adjust head restraints to the proper position. Head restraints are most effective when the center of the head restraint aligns with the center of your head. Taller persons should adjust their head restraint to the highest position.
2 Adjusting the Head Restraints P. 105
· Always wear your seat belt, and make sure you wear it properly. Confirm that any passengers are properly belted as well.
2 Fastening a Seat Belt P. 29
· Protect children by using seat belts or child seats according to a child's age, height and weight.
2 Child Safety P. 49
2013 Fit
1Safety Checklist If the door and tailgate open indicator is on, a door and/or the tailgate is not completely closed. Close all doors and the tailgate tightly until the indicator goes off. 2 Door and Tailgate Open Indicator P. 68
QRG TOC
Safe Driving
Index
Home
25
Seat Belts
QRG About Your Seat Belts
2013 Fit
Seat belts are the single most effective safety device because they keep you
1About Your Seat Belts
connected to the vehicle so that you can take advantage of many built-in safety TOC features. They also help keep you from being thrown against the inside of the
3 WARNING
Safe Driving
vehicle, against other passengers, or out of the vehicle. When worn properly, seat
Not wearing a seat belt properly increases
belts also keep your body properly positioned in a crash so that you can take full advantage of the additional protection provided by the airbags.
the chance of serious injury or death in a crash, even though your vehicle has
In addition, seat belts help protect you in almost every type of crash, including: - frontal impacts - side impacts
airbags.
Be sure you and your passengers always wear seat belts and wear them properly.
- rear impacts
- rollovers
Seat belts cannot completely protect you in every
crash. But in most cases, seat belts can reduce your
Lap/shoulder seat belts
risk of serious injury.
All five seating positions are equipped with lap/shoulder seat belts with emergency locking retractors. In normal driving the retractor lets you move freely while keeping some tension on the belt. During a collision or sudden stop the retractor locks to
Most states and all Canadian provinces and territories require you to wear seat belts.
restrain your body. The rear seat belts also have a lockable retractor for use with
child seats.
2 Installing a Child Seat with a Lap/Shoulder Seat Belt P. 56
Index
Home
26
uuSeat BeltsuAbout Your Seat Belts
Proper use of seat belts Follow these guidelines for proper use: · All occupants should sit upright, well back in the seat, and remain in that position
for the duration of the trip. Slouching and leaning reduces the effectiveness of the belt and can increase the chance of serious injury in a crash.
· Never place the shoulder part of a lap/shoulder seat belt under your arm or behind your back. This could cause very serious injuries in a crash.
· Two people should never use the same seat belt. If they do, they could be very seriously injured in a crash.
· Do not put any accessories on the seat belts. Devices intended to improve comfort or reposition the shoulder part of a seat belt can reduce the protective capability and increase the chance of serious injury in a crash.
2013 Fit
1About Your Seat Belts If a rear seat passenger moves around and extends the seat belt, the lockable retractor may activate. If this happens, release the retractor by unfastening the seat belt and allow the belt to retract completely. Then refasten the belt.
Safe Driving
QRG TOC
Seat Belt Reminder
Your vehicle monitors front seat belt use. If the ignition switch is turned to ON (w before the driver's seat belt is fastened, a beeper will sound and the indicator will blink. If the driver does not fasten the belt before the beeper stops, the indicator will remain on.
The beeper will also periodically sound and the indicator will blink while driving until the driver's and front passenger's seat belts are fastened.
1Seat Belt Reminder
The indicator will also come on if a front passenger does not fasten their seat belt within 6 seconds after the ignition switch is turned to ON (w. When no one is sitting in the front passenger's seat, or a child or small adult is riding there, the indicator will not come on. This is because the weight sensors in the seat cannot detect their presence.
Index
Continued
Home
27
uuSeat BeltsuAbout Your Seat Belts
QRG TOC
2013 Fit
Automatic Seat Belt Tensioners
The front seats are equipped with automatic seat belt tensioners to enhance safety.
The tensioners automatically tighten the front seat belts during a moderate-tosevere frontal collision, sometimes even if the collision is not severe enough to inflate the front airbags.
1Automatic Seat Belt Tensioners
The seat belt tensioners can only operate once. If a tensioner is activated, the SRS indicator will come on. Have a dealer replace the tensioner and thoroughly inspect the seat belt system as it may not offer protection in a subsequent crash.
Safe Driving
Index
Home
28
uuSeat BeltsuFastening a Seat Belt
Fastening a Seat Belt
After adjusting a front seat to the proper position, and while sitting upright and well
back in the seat:
2 Adjusting the Seats P. 103
Pull out slowly.
1. Pull the seat belt out slowly.
Correct Seated Posture.
2013 Fit
1Fastening a Seat Belt No one should sit in a seat with an inoperative seat belt or one that does not appear to be working correctly. Using a seat belt that is not working properly may not protect the occupant in a crash. Have a dealer check the belt as soon as possible.
Never insert any foreign objects into the buckle or retractor mechanism.
Safe Driving
QRG TOC
Latch Plate
Buckle
2. Insert the latch plate into the buckle, then tug on the belt to make sure the buckle is secure. u Make sure that the belt is not twisted or caught on anything.
Continued
Index
Home
29
uuSeat BeltsuFastening a Seat Belt
Safe Driving
QRG TOC
Lap belt as low as possible
2013 Fit
3. Position the lap part of the belt as low as possible across your hips, then pull up on the shoulder part of the belt so the lap part fits snugly. This lets your strong pelvic bones take the force of a crash and reduces the chance of internal injuries.
4. If necessary, pull up on the belt again to remove any slack, then check that the belt rests across the center of your chest and over your shoulder. This spreads the forces of a crash over the strongest bones in your upper body.
1Fastening a Seat Belt
3 WARNING
Improperly positioning the seat belts can cause serious injury or death in a crash.
Make sure all seat belts are properly positioned before driving.
To release the belt, push the red PRESS button then guide the belt by hand until it has retracted completely. When exiting the vehicle, be sure the belt is out of the way and will not get caught by closing the door.
Adjusting the Shoulder Anchor
The front seats have adjustable shoulder anchors to accommodate taller and shorter occupants.
1. Move the anchor up and down while holding the release button.
Push
2. Position the anchor so that the belt rests
across the center of your chest and over
your shoulder.
1Adjusting the Shoulder Anchor The shoulder anchor height can be adjusted to four levels. If the belt contacts your neck, lower the height one level at a time.
After an adjustment, make sure that the shoulder anchor position is secure.
Index
Home
30
uuSeat BeltsuFastening a Seat Belt
2013 Fit
QRG
Seat Belt with Detachable Anchor
1Seat Belt with Detachable Anchor
Small Latch
1. Pull out the seat belt's small latch plate and
3 WARNING
TOC
Plate
the latch plate from each holding slot in the ceiling.
Using the seat belt with the detachable anchor unlatched increases the chance of
serious injury or death in a crash.
Safe Driving
Before using the seat belt, make sure the detachable anchor is correctly latched.
Small Latch Plate
Latch Plate
2. Line up the triangle marks on the small latch plate and anchor buckle. Make sure the seat belt is not twisted. Attach the belt to the anchor buckle.
To unlatch the detachable anchor, insert the latch plate into the slot on the side of the anchor buckle.
Anchor Buckle
Latch Plate
Anchor Buckle
3. Insert the latch plate into the buckle. Properly fasten the seat belt the same way you fasten the lap/shoulder seat belt.
Buckle
Continued
Latch Plate
Index
Home
31
uuSeat BeltsuFastening a Seat Belt
Safe Driving
QRG TOC
Advice for Pregnant Women
If you are pregnant, the best way to protect yourself and your unborn child when driving or riding in a vehicle is to always wear a seat belt and keep the lap part of the belt as low as possible across the hips.
Wear the shoulder belt across the chest avoiding the abdomen.
2013 Fit
1Advice for Pregnant Women Each time you have a checkup, ask your doctor if it is okay for you to drive.
To reduce the risk of injuries to both you and your unborn child that can be caused by an inflating front airbag:
· When driving, sit upright and adjust the seat as far
back as possible while allowing full control of the vehicle.
· When sitting in the front passenger's seat, adjust
the seat as far back as possible.
Wear the lap part of the belt as low as possible across the hips.
Index
Home
32
uuSeat BeltsuSeat Belt Inspection
Seat Belt Inspection
Regularly check the condition of your seat belts as follows:
1Seat Belt Inspection
2013 Fit
QRG
· Pull each belt out fully, and look for frays, cuts, burns, and wear.
3 WARNING
TOC
Safe Driving
· Check that the latches work smoothly and the belts retract easily. u If a belt does not retract easily, cleaning the belt may correct the problem. Only use a mild soap and warm water. Do not use bleach or cleaning solvents. Make
Not checking or maintaining seat belts can result in serious injury or death if the seat belts do not work properly when needed.
sure the belt is completely dry before allowing it to retract.
Check your seat belts regularly and have
Any belt that is not in good condition or working properly will not provide proper
any problem corrected as soon as possible.
protection and should be replaced as soon as possible.
A belt that has been worn during a crash may not provide the same level of
protection in a subsequent crash. Have your seat belts inspected by a dealer after
any collision.
Index
Home
33
Airbags
QRG Airbag System Components
TOC
8
11 12 9
8
7 10 10
Safe Driving
6 8
8
8
Index
Home
34
2013 Fit
8
uuAirbagsuAirbag System Components
2013 Fit
QRG
The front, front side, and side curtain
d An electronic control unit that continually h Impact sensors that can detect a
airbags are deployed according to the
monitors and records information about
moderate-to-severe front or side
direction and severity of impact. The airbag
the sensors, the airbag activators, the
collision.
TOC
Safe Driving
system includes:
seat belt tensioners, and driver and front
passenger seat belt use when the ignition i An indicator on the dashboard that alerts
a Two SRS (Supplemental Restraint System)
switch is in ON (w.
you that the front passenger's front
front airbags. The driver's airbag is stored
airbag has been turned off.
in the center of the steering wheel; the e Automatic front seat belt tensioners. The
front passenger's airbag is stored in the
driver's and front passenger's seat belts j Sensors that can detect if a child or small
dashboard. Both are marked SRS
incorporate sensors that detect whether
statured adult is in the deployment path
AIRBAG.
or not they are fastened.
of the front passenger's side airbag.
b Two side airbags, one for the driver and one for a front passenger. The airbags are stored in the outer edges of the seatbacks. Both are marked SIDE AIRBAG.
c Two side curtain airbags, one for each side of the vehicle. The airbags are stored in the ceiling, above the side windows. The front and rear pillars are marked SIDE CURTAIN AIRBAG.
f A driver's seat position sensor. If the seat is too far forward, the airbag will inflate with less force.
g Weight sensors in the front passenger's seat. The front passenger's airbag will be turned off if the weight on the seat is 65 lbs (29 kg) or less (the weight of an infant or small child).
k An indicator on the instrument panel that alerts you to a possible problem with your airbag system or seat belt tensioners.
l An indicator on the instrument panel that alerts you that the front passenger's side airbag has been turned off.
Index
Home
Continued 35
uuAirbagsuAirbag System Components
2013 Fit
QRG
Important facts about your airbags
1Important facts about your airbags
TOC Airbags can pose serious hazards. To do their job, airbags must inflate with
Do not attempt to deactivate your airbags. Together, airbags and seat belts provide the best protection.
tremendous force. So, while airbags help save lives, they can cause burns, bruises,
Safe Driving
and other minor injuries, and sometimes even fatal ones if occupants are not
When driving, keep hands and arms out of the
wearing their seat belts properly and sitting correctly.
deployment path of the front airbag by holding each side of the steering wheel. Do not cross an arm over
What you should do: Always wear your seat belt properly, and sit upright and as
the airbag cover.
far back from the steering wheel as possible while allowing full control of the
vehicle. A front passenger should move their seat as far back from the dashboard as
possible.
Remember, however, that no safety system can prevent all injuries or deaths that can occur in a severe crash, even when seat belts are properly worn and the airbags deploy.
Do not place hard or sharp objects between yourself and a front airbag. Carrying hard or sharp objects on your lap, or driving with a pipe or other sharp object in your mouth, can result in injuries if your front airbag inflates.
Do not attach or place objects on the front airbag covers. Objects on the covers marked SRS AIRBAG could interfere with the proper operation of the airbags or be propelled inside the vehicle and hurt someone if the airbags inflate.
Index
Home
36
Types of Airbags
Your vehicle is equipped with three types of airbags: · Front airbags: Airbags in front of the driver's and front passenger's seats. · Side airbags: Airbags in the driver's and front passenger's seat-backs. · Side curtain airbags: Airbags above the side windows. Each is discussed in the following pages.
uuAirbagsuTypes of Airbags
2013 Fit
1Types of Airbags The airbags can inflate whenever the ignition switch is in ON (w.
QRG TOC
Safe Driving
Front Airbags (SRS)
The front SRS airbags inflate in a moderate-to-severe frontal collision to help protect the head and chest of the driver and/or front passenger.
SRS (Supplemental Restraint System) indicates that the airbags are designed to supplement seat belts, not replace them. Seat belts are the occupant's primary restraint system.
Housing Locations
The front airbags are housed in the center of the steering wheel for the driver, an.d in the dashboard for the front passenger. Both airbags are marked SRS AIRBAG
1Front Airbags (SRS)
Dual-Stage, Multiple-Threshold Front Airbags (SRS) Your vehicle is equipped with dual-stage, multiplethreshold front airbags (SRS).
During a frontal crash severe enough to cause one or both front airbags to deploy, the airbags can inflate at different rates, depending on the severity of the crash, whether or not the seat belts are latched, and/ or other factors. Frontal airbags are designed to supplement the seat belts to help reduce the likelihood of head and chest injuries in frontal crashes.
Continued
Index
Home
37
uuAirbagsuFront Airbags (SRS)
QRG
Operation
TOC Front airbags are designed to inflate during moderate-to-severe frontal collisions. When the vehicle decelerates suddenly, the sensors send information to the control unit which signals one or both front airbags to inflate.
2013 Fit
Safe Driving
A frontal collision can be either head-on or angled between two vehicles, or when a vehicle crashes into a stationary object, such as a concrete wall.
How the Front Airbags Work
While your seat belt restrains your torso, the front airbag provides supplemental protection for your head and chest.
The front airbags deflate immediately so that they won't interfere with the driver's visibility or the ability to steer or operate other controls.
The total time for inflation and deflation is so fast that most occupants are not aware that the airbags deployed until they see them lying in front of them.
1How the Front Airbags Work
After a front airbag inflates in a crash, you may see what looks like smoke. This is actually powder from the airbag's surface. Although the powder is not harmful, people with respiratory problems may experience some temporary discomfort. If this occurs, get out of the vehicle as soon as it is safe to do so.
Although the driver's and front passenger's airbags normally inflate within a split second of each other, it is possible for only one airbag to deploy. This can happen if the severity of a collision is at the margin, or threshold, that determines whether or not the airbags will deploy. In such cases, the seat belt will provide sufficient protection, and the supplemental protection offered by the airbag would be minimal.
Index
Home
38
When front airbags should not deploy Minor frontal crashes: Front airbags were designed to supplement seat belts and help save lives, not to prevent minor scrapes, or even broken bones that might occur during a less than moderate-to-severe frontal crash. Side impacts: Front airbags can provide protection when a sudden deceleration causes a driver or front passenger to move towards the front of the vehicle. Side airbags and side curtain airbags have been specifically designed to help reduce the severity of injuries that can occur during a moderate-to-severe side impact which can cause the driver or passenger to move towards the side of the vehicle. Rear impacts: Head restraints and seat belts are your best protection during a rear impact. Front airbags cannot provide any significant protection and are not designed to deploy in such collisions. Rollovers: Seat belts and, in vehicles equipped with a rollover sensor, side airbags and side curtain airbags offer the best protection in a rollover. Because front airbags could provide little if any protection, they are not designed to deploy during a rollover. When front airbags deploy with little or no visible damage Because the airbag system senses sudden deceleration, a strong impact to the vehicle framework or suspension might cause one or more of the airbags to deploy. Examples include running into a curb, the edge of a hole, or other low fixed object that causes a sudden deceleration in the vehicle chassis. Since the impact is underneath the vehicle, damage may not be readily apparent. When front airbags may not deploy, even though exterior damage
appears severe Since crushable body parts absorb crash energy during an impact, the amount of visible damage does not always indicate proper airbag operation. In fact, some collisions can result in severe damage but no airbag deployment because the airbags would not have been needed or would not have provided protection even if they had deployed.
Continued
uuAirbagsuFront Airbags (SRS)
2013 Fit
QRG TOC
Index Home
39
Safe Driving
uuAirbagsuFront Airbags (SRS)
Safe Driving
QRG TOC
Advanced Airbags
Your front airbags have advanced features to help reduce the likelihood of airbag related injuries to smaller occupants.
The driver's advanced front airbag system includes a seat position sensor.
Driver's Seat Position Sensor
If the seat is too far forward, the airbag inflates with less force, regardless of the severity of the impact.
The passenger's advanced front airbag system has weight sensors.
2013 Fit
1Advanced Airbags
If there is a problem with the driver's seat position sensor, the SRS indicator will come on and the airbag will inflate with full (normal) force, regardless of the driver's seating position.
For both advanced front airbags to work properly:
· Do not spill any liquid on or under the seats. · Do not put any object under the passenger's seat. · Make sure any objects are positioned properly on
the floor. Improperly positioned objects can interfere with the advanced airbag sensors.
· All occupants should sit upright and wear their seat
belts properly.
· Do not place any cover over the passenger side
dashboard.
Passenger's Seat Weight Sensors
Although Honda recommends against carrying an infant or small child in front, if the sensors detect the weight of a child (up to about 65 lbs or 29 kg), the system will automatically turn off the passenger's front airbag.
Index
Home
40
Side Airbags
The side airbags help protect the upper torso of the driver or a front passenger during a moderate-to-severe side impact.
Housing Locations
The side airbags are housed in the outside edge of the driver's and passenger's seatbacks.
Both are marked SIDE AIRBAG.
Housing Location
uuAirbagsuSide Airbags
2013 Fit
1Side Airbags Do not attach accessories on or near the side airbags. They can interfere with the proper operation of the airbags, or hurt someone if an airbag inflates.
QRG TOC
Safe Driving
If the impact is on the passenger side, the airbag deploys even if there is no passenger in the passenger seat.
Do not cover or replace the front seat-back covers without consulting a dealer. Improperly replacing or covering front seat-back covers can prevent your side airbags from properly deploying during a side impact.
Operation
When inflated
When the sensors detect a moderate-tosevere side impact, the control unit signals the side airbag on the impact side to immediately inflate.
Side Airbag
Continued
Index
Home
41
Safe Driving
uuAirbagsuSide Airbags
QRG
When a side airbag deploys with little or no visible damage Because the airbag systems senses sudden acceleration, a strong impact to the side TOC of the vehicle's framework can cause a side airbag to deploy. In such cases, there may be little or no damage, but the side impact sensors detected a severe enough impact to deploy the airbag. When a side airbag may not deploy, even though visible damage appears
severe It is possible for a side airbag to not deploy during an impact that results in apparently severe damage. This can occur when the point of impact was towards the far front or rear of the vehicle, or when the vehicle's crushable body parts absorbed most of the crash energy. In either case, the side airbag would not have been needed nor provided protection even if it had deployed.
Index
Home
42
2013 Fit
uuAirbagsuSide Airbags
Side Airbag Cutoff System
To reduce the likelihood that a front passenger may be injured by an inflating side airbag, the passenger side airbag is automatically turned off when: · The height sensors detect a child or short-statured adult is seated in the front
passenger seat.
· The position sensor detects that the front passenger is leaning into the deployment path of the side airbag.
When the side airbag cutoff system is activated, the side airbag off indicator comes on.
2 Side Airbag Off Indicator P. 47
Side Airbag Off Indicator
If the side airbag off indicator comes on, have the passenger sit upright. A few seconds after the passenger is sitting properly, the side airbag will automatically be turned on, and the indicator will go off.
1Side Airbag Cutoff System
Sensor that monitor the passenger's height.
2013 Fit
Sensor that monitor the passenger's position.
The sensors that monitor the front passenger's height and body position may not work if:
· The seat-back is wet · The passenger is touching a metal or other
electrical conductive object
· A seat cushion is on the seat · The passenger is wearing excessively thick clothing
Safe Driving
QRG TOC
If the front passenger is a child, stop when it is safe to do so, and have the child sit properly restrained in a rear seat.
Index
Home
43
Safe Driving
QRG TOC
uuAirbagsuSide Curtain Airbags
Side Curtain Airbags
The side curtain airbags help protect the heads of the driver and passengers in outer seating positions during a moderate-to-severe side impact.
Housing Locations
The side curtain airbags are located in the ceiling above the side windows on both sides of the vehicle.
2013 Fit
1Side Curtain Airbags The side curtain airbags are most effective when an occupant is wearing their seat belt properly and sitting upright, well back in their seat.
Do not attach any objects to the side windows or roof pillars as they can interfere with the proper operation of the side curtain airbags.
Side Curtain Airbag Storage
Operation
The side curtain airbag is designed to deploy in a moderate-to-severe side impact.
Deployed Side Curtain Airbag
Index
Home
44
When side curtain airbags deploy in a frontal collision One or both side curtain airbags may inflate in a moderate-to-severe angled frontal collision.
In this case, the side curtain airbags will deploy slightly after the front airbags.
Airbag System Indicators
If a problem occurs in the airbag system, the SRS indicator will come on.
SRS (Supplemental Restraint System) Indicator
When the ignition switch is turned to ON (w
The indicator comes on for a few seconds, then goes off. This tells you the system is working properly.
uuAirbagsuAirbag System Indicators
1SRS (Supplemental Restraint System) Indicator
2013 Fit
QRG
3 WARNING
TOC
Ignoring the SRS indicator can result in serious injury or death if the airbag systems or tensioners do not work properly.
Safe Driving
Have your vehicle checked by a dealer as soon as possible if the SRS indicator alerts you to a possible problem.
If the indicator comes on at any other time, or does not come on at all, have the system checked by a dealer as soon as possible. If you don't, your airbags and seat belt tensioners may not work properly when they are needed.
Continued
Index
Home
45
uuAirbagsuAirbag System Indicators
Safe Driving
QRG TOC
Passenger Airbag Off Indicator
Models with navigation system
U.S.
When the passenger airbag off indicator comes on
The indicator comes on to alert you that the passenger's front airbag has been turned off. This occurs when the weight sensors detect 65 lbs (29 kg) or less, the weight of an infant or small child, on the seat.
Models without navigation system
U.S. Canada
2013 Fit
1Passenger Airbag Off Indicator If the indicator comes on with no front passenger and no objects on the passenger's seat, or with an adult riding there, something may be interfering with the weight sensors. Such as:
· An object hanging on the seat or in the seat-back
pocket.
· A child seat or other object pressing against the
rear of the seat-back.
· A rear passenger pushing or pulling on the back of
the front passenger's seat.
· The front seat or seat-back is forced back against
an object on the seat or floor behind it.
· An object placed under the front passenger's seat.
If none of these conditions exist, have your vehicle checked by a dealer as soon as possible.
The passenger airbag off indicator may come on and goes off repeatedly if the total weight on the seat is near the airbag cutoff threshold.
Infants and small children should always ride properly restrained in a back seat.
2 Child Safety P. 49
Objects placed on the seat can also cause the indicator to come on.
Index If the front passenger seat is empty, the passenger's front airbag will not deploy and the indicator will not come on.
Home
46
uuAirbagsuAirbag System Indicators
Side Airbag Off Indicator
When the side airbag off indicator
U.S.
Canada
comes on
This indicator comes on if the passenger's side
airbag has been turned off because the
passenger is too small to be sitting in the front
seat, is slouching or not sitting upright, or has
leaned into the airbag's deployment path.
2013 Fit
1Side Airbag Off Indicator When you turn the ignition switch to ON (w, the indicator should come on for a few seconds and then go out. If it doesn't come on, stays on, or comes on while driving without a passenger in the front seat, have the system checked by a dealer as soon as possible.
Safe Driving
QRG TOC
Unless the passenger is a smaller statured adult or a child, the indicator should go off when the passenger returns to a proper upright sitting position.
Index
Home
47
Safe Driving
QRG TOC
uuAirbagsuAirbag Care
Airbag Care
You do not need to, and should not, perform any maintenance on or replace any airbag system components yourself. However, you should have your vehicle inspected by a dealer in the following situations:
When the airbags have deployed If an airbag has inflated, the control unit and other related parts must be replaced. Similarly, once an automatic seat belt tensioner has been activated, it must be replaced.
2013 Fit
1Airbag Care We recommend against the use of salvaged airbag system components, including the airbag, tensioners, sensors, and control unit.
When the vehicle has been in a moderate-to-severe collision Even if the airbags did not inflate, have your dealer inspect the following: the driver's seat position sensor, weight sensors in the passenger's seat, front seat belt tensioners, and each seat belt that was worn during the crash.
Do not remove or modify a front seat without consulting a dealer This would likely disable the driver's seat position sensor or the passenger's weight sensors. If it is necessary to remove or modify a front seat to accommodate a person with disabilities, contact a Honda dealer, or for U.S. vehicles, American Honda Automobile Customer Service at 800-999-1009 and for Canadian vehicles, Honda Canada Customer Relations at 888-9-HONDA-9.
Index
Home
48
Child Safety
Protecting Child Passengers
2013 Fit
QRG
Each year, many children are injured or killed in vehicle crashes because they are
1Protecting Child Passengers
either unrestrained or not properly restrained. In fact, vehicle accidents are the number one cause of death of children age 12 and under.
3 WARNING
TOC
Safe Driving
To reduce the number of child deaths and injuries, every state, Canadian province and territory requires that infants and children be properly restrained when they ride in a vehicle.
Children who are unrestrained or improperly restrained can be seriously injured or killed in a crash.
Any child too small for a seat belt should be
Children should sit properly restrained in a rear seat. This is because: · An inflating front or side airbag can injure or kill a child sitting in the front seat.
properly restrained in a child seat. A larger child should be properly restrained with a seat belt, using a booster seat if necessary.
· A child in the front seat is more likely to interfere with the driver's ability to safely control the vehicle.
· Statistics show that children of all sizes and ages are safer when they are properly restrained in a rear seat.
The National Highway Traffic Safety Administration and Transport Canada recommend that all children age 12 and under be properly restrained in a rear seat. Some states or provinces/ territories have laws restricting where children may ride.
Continued
Index
Home
49
Safe Driving
QRG TOC
uuChild SafetyuProtecting Child Passengers
2013 Fit
· Any child who is too small to wear a seat belt correctly must be restrained in an approved child seat that is properly secured to the vehicle using either the lap belt portion of the lap/shoulder belt or the lower anchors of the LATCH system.
· Never hold a child on your lap because it is impossible to protect them in the event of a collision.
1Protecting Child Passengers
3 WARNING
Allowing a child to play with a seat belt or wrap one around their neck can result in serious injury or death.
· Never put a seat belt over yourself and a child. During a crash, the belt would likely press deep into the child and cause serious or fatal injuries.
· Never let two children use the same seat belt. Both children could be very seriously injured in a crash.
· Do not allow children to operate the doors, windows or seat adjustments.
Instruct children not to play with any seat belt and make sure any unused seat belt a child can reach is buckled, fully retracted, and locked.
To deactivate a lockable retractor, release the buckle and allow the seat belt to wind up all the way.
· Do not leave children in the vehicle unattended, especially in hot weather when the inside of the vehicle can get hot enough to kill them. They could also activate vehicle controls causing it to move unexpectedly.
To remind you of the passenger's front airbag hazards and child safety, your vehicle has warning labels on the dashboard (U.S. models) and on the front visors. Please read and follow the instructions on these labels.
2 Safety Labels P. 62
Index
Home
50
uuChild SafetyuSafety of Infants and Small Children
Safety of Infants and Small Children
2013 Fit
QRG
Protecting Infants
1Protecting Infants
An infant must be properly restrained in a rear-facing, reclining child seat until the
3 WARNING
TOC
Safe Driving
infant reaches the seat maker's weight or height limit for the seat, and the infant is at least one year old.
Positioning a rear-facing child seat Child seats must be placed and secured in a
Placing a rear-facing child seat in the front seat can result in serious injury or death during a crash.
rear seating position.
Always place a rear-facing child seat in the
rear seat, not the front.
When properly installed, a rear-facing child seat may prevent the driver or a front passenger from moving their seat all the way back, or from locking their seat-back in the desired position.
It can also interfere with proper operation of the passenger's advanced front airbag system.
2 Airbags P. 34
If this occurs, we recommend that you install the child seat directly behind the front passenger's seat, move the seat as far forward as needed, and leave it unoccupied. Or, you may wish to get a smaller rear-facing child seat.
Rear-facing child seats should never be installed in a forward facing position.
Always refer to the child seat manufacturer's instructions before installation.
Index
Continued
Home
51
uuChild SafetyuSafety of Infants and Small Children
2013 Fit
QRG
Protecting Smaller Children
1Protecting Smaller Children
Safe Driving
TOC If a child is at least one year old and within the weight range indicated by the child seat manufacturer, the child should be properly restrained in a firmly secured forward-facing child seat. Forward-facing child seat placement We strongly recommend placing a forwardfacing child seat in a rear seating position.
3 WARNING
Placing a forward-facing child seat in the front seat can result in serious injury or death if the front airbag inflates.
If you must place a forward-facing child seat in front, move the vehicle seat as far back as possible, and properly restrain the child.
Placing a forward-facing child seat in the front seat can be hazardous, even with advanced front airbags that automatically turn the passenger's front airbag off. A rear seat is the safest place for a child.
Educate yourself about the laws and regulations regarding child seat use where you are driving, and follow the child seat manufacturer's instructions.
Many experts recommend use of a rear-facing seat up to age two, if the child's height and weight are appropriate for a rear-facing seat.
Index
Home
52
uuChild SafetyuSafety of Infants and Small Children
Selecting a Child Seat
Most child seats are LATCH-compatible (Lower Anchors and Tethers for CHildren). Some have a rigid-type connector, while others have a flexible-type connector. Both are equally easy to use. Some existing and previously owned child seats can only be installed using the seat belt. Whichever type you choose, follow the child seat manufacturer's use and care instructions as well as the instructions in this manual. Proper installation is key to maximizing your child's safety.
2013 Fit
1Selecting a Child Seat Installation of a LATCH-compatible child seat is simple.
LATCH-compatible child seats have been developed to simplify the installation process and reduce the likelihood of injuries caused by incorrect installation.
Safe Driving
QRG TOC
In seating positions and vehicles not equipped with LATCH, a LATCH compatible child seat can be installed using the seat belt and a top tether for added security. This is because all child seats are required to be designed so that they can be secured with a lap belt or the lap part of a lap/shoulder belt. In addition, the child seat manufacturer may advise that a seat belt be used to attach a LATCH-compatible seat once a child reaches a specified weight. Please read the child seat owner's manual for proper installation instructions.
Important consideration when selecting a child seat Make sure the child seat meets the following three requirements: · The child seat is the correct type and size for the child. · The child seat is the correct type for the seating position. · The child seat is compliant with Federal Motor Vehicle Safety Standard 213 or
Canadian Motor Vehicle Safety Standard 213.
Index
Continued
Home
53
uuChild SafetyuSafety of Infants and Small Children
QRG
Installing a LATCH-Compatible Child Seat
TOC A LATCH-compatible child seat can be installed in either of the two outer rear seats. A child seat is attached to the lower anchors with either the rigid or flexible type of connectors. 1. Locate the lower anchors under the marks.
Marks
Safe Driving
Index
Home
54
Lower Anchors Rigid Type
2. Place the child seat on the vehicle seat then attach the child seat to the lower anchors according to the instructions that came with the child seat. u When installing the child seat, make sure that the lower anchors are not obstructed by the seat belt or any other object.
2013 Fit
Flexible Type
uuChild SafetyuSafety of Infants and Small Children
2013 Fit
1Installing a LATCH-Compatible Child Seat For your child's safety, when using a child seat installed using the LATCH system, make sure that the seat is properly secured to the vehicle. A child seat that is not properly secured will not adequately protect a child in a crash and may cause injury to the child or other vehicle occupants.
QRG TOC
Safe Driving
Anchor Tether Strap Hook
3. Put the head restraint to its upright, then route the tether strap between the head restraint legs, and secure the tether strap hook onto the anchor.
4. Tighten the tether strap as instructed by the child seat maker.
5. Make sure the child seat is firmly secured by rocking it forward and back and side to side; little movement should be felt.
6. Make sure any unused seat belt that a child can reach is buckled, the lockable retractor is activated, and the belt is fully retracted and locked.
Continued
Index
Home
55
QRG TOC
uuChild SafetyuSafety of Infants and Small Children
Installing a Child Seat with a Lap/Shoulder Seat Belt
1. Place the child seat on the vehicle seat. 2. Route the seat belt through the child seat
according to the seat maker's instructions, and insert the latch plate into the buckle. u Insert the latch plate fully until it clicks.
2013 Fit
1Installing a Child Seat with a Lap/Shoulder Seat Belt A child seat that is not properly secured will not adequately protect a child in a crash and may cause injury to the child or other vehicle occupants.
Safe Driving
Index
Home
56
3. Slowly pull the shoulder part of the belt all the way out until it stops. This activates the lockable retractor.
4. Let the seat belt completely wind up into the retractor, then try to pull it out to make sure the retractor is locked. u If you are able to pull the shoulder belt out, the lockable retractor is not activated. Pull the seat belt all the way out, and repeat steps 3 4.
5. Grab the shoulder part of the seat belt near the buckle, and pull up to remove any slack from the lap part of the belt. u When doing this, place your weight on the child seat and push it into the vehicle seat.
uuChild SafetyuSafety of Infants and Small Children
6. Make sure the child seat is firmly secured by rocking it forward and back and side to side; little movement should be felt.
7. Make sure any unused seat belt that a child can reach is buckled, the lockable retractor is activated, and the belt is fully retracted and locked.
2013 Fit
1Installing a Child Seat with a Lap/Shoulder Seat Belt To deactivate a lockable retractor, release the buckle and allow the seat belt to wind up all the way.
QRG TOC
Safe Driving
Adding Security with a Tether
Two tether anchorage points are provided behind the rear outer seating positions and one in the ceiling for the rear center. A child seat that is installed with a seat belt and comes with a tether can use the tether for additional security.
1Adding Security with a Tether
Since a tether can provide additional security to the lap/shoulder seat belt installation, we recommend using a tether whenever one is available.
Tether Anchorage Points
Continued
Index
Home
57
uuChild SafetyuSafety of Infants and Small Children
QRG
Anchor Using an outer anchor
1. Put the head restraint to its upright, then
TOC
route the tether strap through the head
restraint legs. Make sure the strap is not
twisted.
Safe Driving
2. Secure the tether strap hook onto the anchor.
Tether Strap Hook 3. Tighten the tether strap as instructed by the child seat manufacturer.
Anchor Cover
Anchor
Using the center anchor 1. Lower the head restraint to its lowest
position.
2. Open the anchor cover.
3. Route the tether strap over the head restraint. Make sure the strap is not twisted.
4. Secure the tether strap hook onto the anchor.
5. Tighten the tether strap as instructed by the child seat manufacturer.
Index
Home
58
2013 Fit
uuChild SafetyuSafety of Larger Children
Safety of Larger Children
2013 Fit
QRG
Protecting Larger Children
1Safety of Larger Children
The following pages give instructions on how to check proper seat belt fit, what kind
3 WARNING
TOC
Safe Driving
of booster seat to use if one is needed, and important precautions for a child who must sit in front.
Allowing a child age 12 or under to sit in front can result in injury or death if the
passenger's front airbag inflates.
Checking Seat Belt Fit
If a larger child must ride in front, move the
When a child is too big for a child seat, secure the child in a rear seat using the lap/ vehicle seat as far to the rear as possible,
shoulder seat belt. Have the child sit upright and all the way back, then answer the following questions.
Checklist
have the child sit up properly and wear the seat belt properly, using a booster seat if needed.
· Do the child's knees bend comfortably over
the edge of the seat?
· Does the shoulder belt cross between the child's neck and arm?
· Is the lap part of the seat belt as low as possible, touching the child's thighs?
· Will the child be able to stay seated like this for the whole trip?
If you answer yes to all these questions, the child is ready to wear the lap/shoulder seat belt correctly. If you answer no to any question, the child needs to ride on a booster seat until the seat belt fits properly without a booster seat.
Index
Continued
Home
59
Safe Driving
QRG TOC
uuChild SafetyuSafety of Larger Children
2013 Fit
Booster Seats
If a lap/shoulder seat belt cannot be used properly, position the child in a booster seat in a rear seating position. For the child's safety, check that the child meets the booster seat manufacturer's recommendations.
Protecting Larger Children-Final Checks
Your vehicle has a rear seat where children can be properly restrained. If you ever have to carry a group of children, and a child must ride in front: · Make sure you read and fully understand the instructions and safety information
in this manual.
· Move the front passenger seat as far back as possible.
· Have the child sit upright and well back in the seat.
· Check that the seat belt is properly positioned so that the child is secure in the seat.
1Booster Seats
When installing a booster seat, make sure to read the instructions that came with it, and install the seat accordingly. There are high- and low-type booster seats. Choose a booster seat that allows the child to wear the seat belt correctly.
Some U.S. states and Canadian provinces and territories require children to use a booster seat until they reach a given age or weight (e.g. 6 years or 60 lbs). Be sure to check current laws in the state or province, or territory where you intend to drive.
Index Home
Monitoring child passengers We strongly recommend that you keep an eye on child passengers. Even older, more mature children sometimes need to be reminded to fasten their seat belts and sit up properly.
60
Exhaust Gas Hazard
Carbon Monoxide Gas
2013 Fit
QRG
The engine exhaust from this vehicle contains carbon monoxide, a colorless,
1Carbon Monoxide Gas
odorless, and highly toxic gas. As long as you properly maintain your vehicle, carbon monoxide gas will not get into the interior.
3 WARNING
TOC
Have the exhaust system inspected for leaks whenever · The exhaust system is making an unusual noise.
Carbon monoxide gas is toxic. Breathing it can cause unconsciousness and even kill you.
Safe Driving
· The exhaust system may have been damaged. · The vehicle is raised for an oil change.
Avoid any enclosed areas or activities that expose you to carbon monoxide.
When you operate a vehicle with the tailgate open, airflow can pull exhaust gas into the interior and create a hazardous condition. If you must drive with the tailgate open, open all the windows and set the heating and cooling* system as shown below.
1. Select the fresh air mode.
2. Select the mode. 3. Set the fan speed to high. 4. Set the temperature control to a comfortable setting.
An enclosed area such as a garage can quickly fill up with carbon monoxide gas. Do not run the engine with the garage door closed. Even when the garage door is open, drive out of the garage immediately after starting the engine.
Adjust the heating and cooling *system in the same manner if you sit in your parked vehicle with the engine running.
* Not available on all models
Index
Home
61
Safety Labels
QRG Label Locations
2013 Fit
These labels are in the locations shown. They warn you of potential hazards that can cause serious injury or death. Read these labels
carefully. TOC
If a label comes off or becomes hard to read (except for the U.S. dashboard label which may be removed by the owner), contact a dealer for a replacement.
Sun Visor
Safe Driving
U.S. models
Canadian models
Doorjambs U.S. models
Dashboard U.S. models only
Index
Home
62
Radiator Cap
Doorjambs Canadian models
2013 Fit
QRG
Instrument Panel
This chapter describes the buttons, indicators, and gauges that are used while driving.
Indicators ............................................ 64 Gauges and Displays
Gauges.............................................. 72 Information Display............................ 73
Index Home
63
Indicators
2013 Fit
QRG
Indicator
Name
On/Blinking
Explanation
Comes on for a few seconds when you Comes on while driving - Make sure the parking
turn the ignition switch to ON (w, then brake is released. Check the brake fluid level.
U.S. TOC
goes off. Comes on when the parking brake is
2 What to do when the indicator comes on while driving P. 258
Instrument Panel
Canada
Parking Brake and Brake System Indicator
applied, and goes off when it is released. Comes on along with the ABS indicator - Have
Comes on when the brake fluid level is the vehicle checked by a dealer.
low.
2 If the Brake System Indicator Comes On P. 258
Comes on if there is a problem with the
brake system.
The beeper sounds and the indicator
comes on if you drive with the parking
brake not fully released.
Low Oil Pressure Indicator
Comes on when you turn the ignition switch to ON (w, and goes off when the engine starts.
Comes on when the engine oil pressure is low.
Comes on while driving - Immediately stop in a safe place.
2 If the Low Oil Pressure Indicator Comes On P. 256
Index
Home
64
Indicator
Name
Malfunction Indicator Lamp
Charging System Indicator
uu Indicators u
2013 Fit
QRG
On/Blinking
Explanation
Comes on when you turn the ignition Readiness codes are part of the on board diagnostics
switch to ON (w, and goes off either
for the emissions control systems.
when the engine starts or after several
2 Testing of Readiness Codes P. 273
seconds if the engine is not started. If Comes on while driving - Have the vehicle
TOC
Instrument Panel
"readiness codes" have not been set, it checked by a dealer.
blinks five times before it goes off.
Blinks while driving - Stop in a safe place where
Comes on if there is a problem with the there are no flammable objects. Stop the engine for
emissions control system.
10 minutes or more, and wait for it to cool down.
Blinks when a misfire in the engine's
Then, take the vehicle to a dealer.
cylinders is detected.
2 If the Malfunction Indicator Lamp Comes On or
Blinks P. 257
Comes on when you turn the ignition switch to ON (w, and goes off when the engine starts.
Comes on when the battery is not charging.
Comes on while driving - Turn off the heating and cooling* system and rear defogger in order to reduce electricity consumption.
2 If the Charging System Indicator Comes On P. 256
Shift Position Indicator *
Indicates the current shift lever position.
2 Shifting P. 165
* Not available on all models
Index
Home
Continued 65
uu Indicators u
Instrument Panel
QRG TOC
Index
2013 Fit
Indicator
Name
On/Blinking
Explanation
Transmission Indicator *
Comes on for a few seconds when you turn the ignition switch to ON (w, then goes off.
Blinks if the transmission system has a problem.
Blinks while driving - Avoid sudden starts and acceleration and have the vehicle checked by a dealer immediately.
M (sequential shift mode) Indicator/ Gear Position Indicator *
Comes on when the manual sequential shift mode is applied.
Blinks if the transmission system has a problem.
2 Sequential Shift Mode P. 169
Seat Belt Reminder Indicator
Comes on and the beeper sounds if you are not wearing a seat belt when you turn the ignition switch to ON (w.
If the front passenger is not wearing a seat belt, the indicator comes on a few seconds later.
Blinks while driving if either you or the front passenger has not fastened a seat belt. The beeper sounds and the indicator blinks at regular intervals.
The beeper stops and the indicator goes off when you and the front passenger fasten their seat belts.
Stays on after you or the front passenger has fastened the seat belt - A detection error may have occurred in the sensor. Have the vehicle checked by a dealer.
2 Seat Belt Reminder P. 27
Low Fuel Indicator
Comes on when the fuel reserve is running low (approximately 1.64 U.S. gal./6.2 Liter left).
Blinks if there is a problem with the fuel gauge.
Comes on - Refuel your vehicle as soon as possible. Blinks - Have the vehicle checked by a dealer.
Home
66 * Not available on all models
Indicator
Name
ABS (Anti-lock Brake System) Indicator
Supplemental Restraint System Indicator
High Temperature Indicator
Low Temperature Indicator
uu Indicators u
2013 Fit
QRG
On/Blinking
Explanation
Comes on for a few seconds when you Stays on constantly - Have the vehicle checked by
turn the ignition switch to ON (w, then a dealer. With this indicator on, your vehicle still has
goes off.
normal braking ability but no anti-lock function.
If it comes on at any other time, there is
2 ABS (Anti-lock Brake System) P. 183
TOC
a problem with the ABS.
Instrument Panel
Comes on for a few seconds when you turn the ignition switch to ON (w, then goes off.
Comes on if a problem with any of the following is detected: - Supplemental restraint system - Side airbag system - Side curtain airbag system - Seat belt tensioner
Stays on constantly or does not come on at all - Have the vehicle checked by a dealer.
Comes on for a few seconds when you turn the ignition switch to ON (w, then goes off.
Blinks when the engine coolant temperature goes up, and stays on if the temperature continues to rise.
Blinks while driving - Drive slowly to prevent overheating.
Stays on while driving - Immediately stop in a safe place and allow the engine to cool.
2 Overheating P. 254
Comes on for a few seconds when you turn the ignition switch to ON (w.
Comes on when the engine coolant temperature is low.
If the indicator stays on after the engine has reached normal operating temperature, there may be a problem with the temperature sensors. Have the vehicle inspected by a dealer.
Index
Home
Continued 67
uu Indicators u
2013 Fit
QRG
Indicator
Name
On/Blinking
Explanation
Comes on for a few seconds when you Stays on constantly - Have the vehicle checked by
TOC
VSA® (Vehicle Stability Assist) System Indicator
turn the ignition switch to ON (w, then goes off. Blinks when VSA® is active. Comes on if there is a problem with the
a dealer.
2 VSA® (Vehicle Stability Assist), aka ESC (Electronic Stability Control), System P. 176
VSA® system.
Instrument Panel
VSA® (Vehicle Stability Assist) OFF Indicator
Comes on for a few seconds when you turn the ignition switch to ON (w, then goes off.
Comes on when you deactivate VSA®.
2 VSA® On and Off P. 177
Door and Tailgate Open Indicator
Comes on for a few seconds if you turn the ignition switch to ON (w, then goes off.
Comes on if any door or the tailgate is not completely closed.
Goes off when all doors and the tailgate are closed.
EPS (Electric Power Steering) System Indicator
Comes on when you turn the ignition switch to ON (w, and goes off when the engine starts.
Comes on if there is a problem with the EPS (Electric Power Steering) System.
Stays on constantly or does not come on at all - Have the vehicle checked by a dealer.
2 If the EPS System Indicator Comes On P. 258
Index
Home
68
Indicator
Name
U.S. models only
TPMS Indicator
U.S. models only
Low Tire Pressure Indicator
U.S.
Canada
Side Airbag Off Indicator
uu Indicators u
2013 Fit
QRG
On/Blinking
Explanation
Comes on for a few seconds when you Stays on constantly or does not come on at all
turn the ignition switch to ON (w.
- Have the vehicle checked by a dealer. If the vehicle
Comes on if there is a problem with the is fitted with a compact spare, get your regular tire
TPMS, or when a compact spare tire* is repaired or replaced and put back on your vehicle as TOC
temporarily installed.
soon as you can.
Instrument Panel
Comes on for a few seconds when you turn the ignition switch to ON (w.
Comes on if the tire pressure of any of the tires becomes significantly low.
Comes on for a while and then goes off when a compact spare tire is temporarily installed.
Comes on while driving - Stop in a safe place, check tire pressures, and inflate the tire(s) if necessary.
Comes on for a few seconds when you turn the ignition switch to ON (w, then goes off.
Comes on when the passenger side airbag system is automatically shut off.
It does not mean there is a problem with your side airbags.
Comes on when nobody is sitting in the passenger seat - Have the vehicle checked by a dealer.
Comes on when someone is sitting in the seat - Have the passenger sit properly.
* Not available on all models
Index
Home
Continued 69
uu Indicators u
2013 Fit
QRG
Indicator
Name
On/Blinking
Explanation
The turn signal indicators blink when you Does not blink or blinks rapidly - A turn signal
TOC
Turn Signal Indicators
operate the turn signal lever. If you press the hazard warning button,
both indicators and all turn signals blink
light bulb has blown. Change the bulb immediately.
2 Replacing Light Bulbs P. 213 P. 216
at the same time.
Instrument Panel
Comes on when the high beam
High Beam Indicator
headlights are on. Comes on with reduced brightness when
--
DRL (daytime running lights) are on.
Lights On Indicator
Comes on whenever the light switch is on when the exterior lights are on.
If you remove the key from the ignition switch while the lights are on, a chime sounds when the driver's door is opened.
Comes on when the fog lights are on.
Fog Light Indicator*
--
Index
Immobilizer System Indicator
Comes on briefly when you turn the Blinks - You cannot start the engine. Turn the
ignition switch to ON (w, then goes off. ignition switch to LOCK (0, pull the key out, and
Comes on if the immobilizer system
then insert the key and turn it to ON (w again.
cannot recognize the key information. Repeatedly blinks - The system may be
malfunctioning. Have the vehicle checked by a
dealer.
Do not attempt to alter this system or add other
devices to it. Electrical problems can occur.
Home
70 * Not available on all models
uu Indicators u
Indicator
Name
Indicator
Security System Alarm Indicator*
CRUISE MAIN Indicator *
On/Blinking Blinks when the security system alarm
has been set.
Comes on when you press the CRUISE button.
Explanation
2 Security System Alarm* P. 90 2 Cruise Control* P. 173
2013 Fit
QRG
TOC
Instrument Panel
CRUISE CONTROL Comes on if you have set a speed for
Indicator *
cruise control.
2 Cruise Control* P. 173
Washer Level Indicator *
Refill washer fluid.
Comes on when the washer fluid is low.
2 Refilling Window Washer Fluid P. 211
Maintenance Minder Indicator
Daytime Running Lights Indicator
Comes on when the scheduled maintenance is due soon.
2 Maintenance MinderTM P. 195
Comes on for a few seconds when you turn the ignition switch to ON (w, then goes off.
Comes on if there is a problem with the DRL system.
Have your vehicle checked by a dealer.
2 Daytime Running Lights P. 96
* Not available on all models
Index
Home
71
Gauges and Displays
QRG Gauges
Gauges include the speedometer, tachometer, fuel gauge, and related indicators. They are displayed when the ignition switch is in ON (w.
Speedometer
TOC Displays your driving speed in mph (U.S.) or km/h (Canada).
2013 Fit
Instrument Panel
Tachometer
Shows the number of engine revolutions per minute.
Fuel Gauge
Displays the amount of fuel left in the fuel tank.
Index Home
72
1Fuel Gauge
NOTICE You should refuel when the reading approaches E . Running out of fuel can cause the engine to misfire, damaging the catalytic converter.
The actual amount of remaining fuel may differ from the fuel gauge reading.
Information Display
The information display shows the odometer, trip meter, engine oil life and maintenance service item codes, and other gauges.
Switching the Display
Press the (select/reset) knob to change the display.
uuGauges and DisplaysuInformation Display
2013 Fit
1Switching the Display Each time you press the knob, the information display changes as follows:
QRG
Instant Fuel Economy,
Trip Meter
TOC
Instrument Panel
Instant Fuel Economy, Average Fuel Economy
Engine Oil Life
Odometer
Shows the total number of miles or kilometers that your vehicle has accumulated.
Trip Meter
Shows the total number of miles or kilometers driven since the last reset.
Resetting a trip meter To reset a trip meter, display it, then press and hold the reset to 0.0.
knob. The trip meter is
Instant Fuel Economy, Odometer
Continued
Index
Home
73
Instrument Panel
uuGauges and DisplaysuInformation Display
QRG
Average Fuel Economy
Shows the estimated average fuel economy of the trip meter in mpg (U.S.) or l/100 km (Canada). The display is updated at set intervals. When a trip meter is reset, the average fuel economy is also reset. TOC
Engine Oil Life
Shows the remaining oil life and Maintenance MinderTM.
2 Maintenance MinderTM P. 195
Instant Fuel Economy
Shows the instant fuel economy as a bar graph in mpg or l/100 km.
Check Fuel Cap
Appears when the fuel fill cap is loose or is not installed.
2 Check/Tighten Fuel Cap Message P. 257
Index
Home
74
2013 Fit
2013 Fit
QRG
Controls
This chapter explains how to operate the various controls necessary for driving.
Setting the Clock ................................ 76 Locking and Unlocking the Doors
Key Types and Functions .................... 77 Locking/Unlocking the Doors from the Outside ............................................ 79 Locking/Unlocking the Doors from the Inside ............................................... 82 Childproof Door Locks ....................... 83 Auto Door Locking/Unlocking* .......... 84 Opening and Closing the Tailgate Using the Key*................................... 88 Using the Tailgate Open Handle ......... 89 Security System .................................. 90 Immobilizer System ............................ 90
* Not available on all models
Security System Alarm*...................... 90 Opening and Closing the Windows .. 92 Operating the Switches Around the Steering Wheel
Ignition Switch................................... 94 Turn Signals ....................................... 95 Light Switches.................................... 95 Fog Lights* ........................................ 96 Daytime Running Lights ..................... 96 Wipers and Washers .......................... 97 Brightness Control ............................. 99 Rear Defogger/Heated Door Mirror*
Button ........................................... 100 Adjusting the Steering Wheel........... 101
Adjusting the Mirrors....................... 102 Interior Rearview Mirror ................... 102 Power Door Mirrors ......................... 102
Adjusting the Seats .......................... 103 Adjusting the Seat Positions............. 103
Interior Lights/Interior Convenience Items ................................................ 111 Interior Lights .................................. 111 Interior Convenience Items .............. 113
Heating and Cooling*....................... 118 Using Vents, Heating and A/C*........ 118
Index
Home
75
Setting the Clock
QRG Clock
Models without navigation system
You can adjust the time in the clock display, using the CLOCK button with the ignition switch in ACCESSORY (q or ON (w.
Adjusting the Time
(2 Button TOC
(1 Button
Clock Display
Controls
CLOCK Button
2013 Fit
1Clock
Models without navigation system
Press and hold the CLOCK button until the clock display begins to blink, then press the (3 (Reset) button.
Depending on the displayed time, the clock sets forward or backward. Example: 1:06 will reset to 1:00 1:53 will reset to 2:00
Models with navigation system
The clock is automatically updated through the navigation system, so the time does not need to be adjusted.
(3 Button
1. Press and hold the CLOCK button until the clock display begins to blink. 2. Press the (1 (Hour) button to change the hours. 3. Press the (2 (Minute) button to change the minutes. 4. Press the CLOCK button to go back to the normal display.
Index
Home
76
Locking and Unlocking the Doors
Key Types and Functions
This vehicle comes with the following keys:
Keys
Ignition Keys with Remote Transmitter*
Use the keys to start and stop the engine, and to lock and unlock all the doors, and tailgate. You can also use the remote transmitter* to lock and unlock the doors, and tailgate.
Ignition Keys*
2013 Fit
1Key Types and Functions
All of the keys have an immobilizer system. The immobilizer system helps to protect against vehicle theft.
2 Immobilizer System P. 90
The keys contain precision electronics. Adhere to the following advice to prevent damage to the electronics:
· Do not leave the keys in direct sunlight, or in
locations with high temperature or high humidity.
· Do not drop the keys or set heavy objects on them. · Keep the keys away from liquids. · Do not take the keys apart except for replacing the
battery. If the circuits in the keys are damaged, the engine may not start, and the remote transmitter may not work. If the keys do not work properly, have them inspected by a dealer.
Controls
QRG TOC
* Not available on all models
Continued
Index
Home
77
uuLocking and Unlocking the DoorsuKey Types and Functions
QRG
Key Number Tag
Contains a number that you will need if you purchase a replacement key.
TOC
2013 Fit
1Key Number Tag Keep the key number tag separate from the key in a safe place outside of a vehicle. If you wish to purchase an additional key, contact a dealer.
If you lose your key and you cannot start the engine, contact a dealer.
Controls
Index
Home
78
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside
Locking/Unlocking the Doors from the Outside
2013 Fit
Using the Remote Transmitter*
Locking the doors Press the lock button.
LED
Unlock Button
Lock Button
Once: uSome exterior lights flash, all the doors and tailgate lock, and the security system sets.
Twice (within five seconds after the first push):
uA beeper sounds and verifies the security system is set.
Unlocking the doors Press the unlock button.
Once: uSome exterior lights flash twice, and the driver's door unlocks.
Twice: uThe remaining doors and tailgate unlock.
1Using the Remote Transmitter* If you do not open a door within 30 seconds of unlocking the vehicle with the remote transmitter, the doors will automatically relock.
If the interior light switch is in the door activated position, the interior light comes on when you press the unlock button. No doors opened: The light fades out after 30 seconds. Doors relocked with the remote: The light goes off immediately.
The remote transmitter uses low-power signals, so the operating range may vary depending on the surroundings.
The remote will not lock the vehicle when a door or tailgate is open.
If the distance at which it works varies, the battery is probably low. If the LED does not come on when you press a button, the battery is dead.
2 Replacing the Battery P. 232
Controls
QRG TOC
* Not available on all models
Continued
Index
Home
79
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside
QRG
Locking/Unlocking the Doors Using a Key
Models with remote transmitter
When you lock the driver's door with a key, all
of the other doors and tailgate lock at the
Unlock same time. When unlocking, the driver's door
Lock
unlocks first. Turn the key a second time
within a few seconds to unlock the remaining
TOC
doors and the tailgate.
Controls
Lock
Models without remote transmitter
Fully insert the key and turn it.
Unlock
Index
Home
80
2013 Fit
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside
Locking a Door Without Using a Key
Locking the driver's door
Models with remote transmitter
Pull the lock tab rearward a or push the master door lock switch in the lock direction b, and close the door.
2013 Fit
1Locking a Door Without Using a Key
Models with remote transmitter
When you lock the driver's door, all the other doors and tailgate lock at the same time. Make sure you have the key in your hand before locking the door to prevent it from being locked in the vehicle.
QRG
Controls
Models without remote transmitter
TOC
Pull and hold the outside door handle, then pull the lock tab rearward a. Release the handle, then close the door.
Locking the passenger's doors Pull the lock tab rearward and close the door.
Models with remote transmitter
Lockout prevention system The doors and the tailgate cannot be locked when the key is in the ignition switch, and any door or the tailgate is open.
Index
Home
81
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Inside
QRG Locking/Unlocking the Doors from the Inside
Using the Lock Tab
To Lock
Lock Tab
Locking a door Pull the lock tab rearward.
Unlocking a door Push the lock tab forward.
TOC To Unlock
2013 Fit
1Using the Lock Tab
Models with remote transmitter
When you lock the door using the lock tab on the driver's door, all of the other doors and tailgate lock at the same time.
When you unlock the door using the lock tab on the driver's door, only the driver's door will unlock.
Controls
Using the Master Door Lock Switch*
To Lock
Press the master door lock switch in as shown to lock or unlock all doors and the tailgate.
1Using the Master Door Lock Switch*
When you lock/unlock the driver's door and tailgate using the master lock switch, all the other doors lock/ unlock at the same time.
To Unlock
Master Door Lock Switch
Index
Home
82 * Not available on all models
uuLocking and Unlocking the DoorsuChildproof Door Locks
Childproof Door Locks
2013 Fit
QRG
The childproof door locks prevent the rear doors from being opened from the inside 1Childproof Door Locks
regardless of the position of the lock tab.
Setting the Childproof Door Locks
Slide the lever in the rear door to the lock
To open the door from the inside when the childproof door lock is on, put the lock tab in the unlock position, lower the rear window, put your hand out of the window, and pull the outside door handle.
Unlock
position, and close the door.
When opening the door
TOC
Open the door using the outside door handle.
Lock
Controls
Index
Home
83
uuLocking and Unlocking the DoorsuAuto Door Locking/Unlocking*
QRG Auto Door Locking/Unlocking*
Your vehicle locks all doors and unlocks the driver's door automatically when a certain condition is met.
Auto Door Locking
Drive lock mode All doors lock when the vehicle's speed reaches about 10 mph (15 km/h).
2013 Fit
1Auto Door Locking/Unlocking* You can turn off or change to another auto door locking/unlocking setting using the master door lock switch. 2 Customizing the Auto Door Locking/ Unlocking Setting* P. 85
Controls
TOC Auto Door Unlocking
Models with automatic transmission
Park unlock mode The driver's door unlocks when the shift lever is moved into (P with the brake pedal depressed.
Models with manual transmission
Ignition switch unlock mode The driver's door unlocks when the ignition switch is moved out of ON (w.
The settings can be changed to unlock all doors.
Index
Home
84 * Not available on all models
uuLocking and Unlocking the DoorsuCustomizing the Auto Door Locking/Unlocking Setting*
Customizing the Auto Door Locking/Unlocking Setting*
You can customize the auto door locking/unlocking setting to your liking using the master door lock switch.
2013 Fit
QRG
List of the Auto Door Locking/Unlocking Customizable Options
Auto door locking
Mode
Description
Drive Lock Mode*1
All doors lock when the vehicle's speed reaches about 10 mph (15 km/h).
Models with
TOC
automatic transmission All doors lock when the shift lever is moved out of (P with the brake pedal depressed.
Park Lock Mode
Controls
Off
The auto door locking is deactivated all the time.
Auto door unlocking
Mode
Description
Models with automatic transmission
Park Unlock Mode
Driver's door unlocks*2
All doors unlock
When the shift lever is moved into (P with the brake pedal depressed.
Ignition Switch Unlock Driver's door unlocks*3
Mode
When the ignition switch is moved out of ON (w.
All doors unlock
Off
The auto door unlocking is deactivated all the time.
*1: Default setting *2: Default setting for automatic transmission models *3: Default setting for manual transmission models
* Not available on all models
Index
Home
Continued 85
uuLocking and Unlocking the DoorsuCustomizing the Auto Door Locking/Unlocking Setting*
QRG
Customizing Flow for Auto Door Locking Options
2013 Fit
Steps
Drive Lock Mode*1
Models with automatic transmission
Park Lock Mode
Off
1 TOC
Apply the parking brake.
Models with automatic transmission
Move the shift lever out of (P with the brake pedal depressed.
Apply the parking brake. Move the shift lever to (P.
Apply the parking brake.
Models with automatic transmission
Move the shift lever to (P.
Controls
2 The driver's door must be closed at this stage.
Open the driver's door.
3
Turn the ignition switch to ON (w.
Turn the ignition switch to ON (w.
Press and hold the front of the master door lock switch on the driver's door for more than five seconds. Release the switch after you hear a click twice.
Press and hold the front of the master
4
door lock switch on the driver's door for more than five seconds. Release the switch
after you hear one click.
Index
5
Turn the ignition switch to ACCESSORY (q within 20 seconds. uCustomization is completed.
*1: Default setting
Home
86
* Not available on all models
uuLocking and Unlocking the DoorsuCustomizing the Auto Door Locking/Unlocking Setting*
Customizing Flow for Auto Door Unlocking Options
2013 Fit
QRG
Ignition Switch Unlock Mode
Models with automatic transmission
Park Unlock Mode
Steps
Off
To unlock driver's door*1
To unlock all doors
To unlock driver's door*2
To unlock all doors
Controls
Apply the parking brake.
1
Models with automatic transmission
Apply the parking brake.
Move the shift lever out of (P with the brake Move the shift lever to (P.
pedal depressed.
Apply the parking brake.
TOC
Models with automatic transmission
Move the shift lever to (P.
2
The driver's door must be closed at this stage.
Open the driver's door.
3
Turn the ignition switch to ON (w.
Turn the ignition switch to ON (w.
Press and hold the rear of the master door lock switch on the driver's door for more than five seconds. You will hear a click twice.
4
Keep pressing the switch
5
Release the switch. for another five seconds Release the switch.
to hear one more click.
6
Turn the ignition switch to ACCESSORY (q within 20 seconds. uCustomization is completed.
*1: Default setting for manual transmission models *2: Default setting for automatic transmission models
* Not available on all models
Keep pressing the switch for another five seconds Release the switch. to hear one more click.
Index
Home
87
Opening and Closing the Tailgate
Controls
QRG TOC
Precautions for Opening/Closing the Tailgate
Always make sure individuals and objects are clear of the tailgate before opening or closing it.
Opening the tailgate · Open the tailgate all the way.
uIf it is not fully opened, the tailgate may begin to close under its own weight.
· Be careful when it is windy. The wind may cause the tailgate to close.
Closing the tailgate Keep the tailgate closed while driving to:
uAvoid possible damage. uPrevent exhaust gas from leaking into the vehicle.
2 Carbon Monoxide Gas P. 61
2013 Fit
1Precautions for Opening/Closing the Tailgate Be careful not to put your hands between the tailgate and the cargo area when closing the tailgate.
When you are storing or picking up luggage from the cargo area while the engine is idling, do not stand in front of the exhaust pipe. You may get burned.
Do not allow any passenger in the cargo space. They may get hurt during hard braking, a sudden acceleration, or a crash.
Using the Key*
Insert the key in the cylinder to lock and unlock the tailgate.
Index
Lock
Key Unlock
Home
88 * Not available on all models
uuOpening and Closing the TailgateuUsing the Tailgate Open Handle
Using the Tailgate Open Handle
Models with remote transmitter
When all the doors are unlocked, the tailgate is unlocked.
2013 Fit
QRG
All models
Pull up the tailgate open handle and lift open the tailgate.
Tailgate Open
Handle
TOC
Controls
To close the tailgate, grab the inner handle,
pull the tailgate down, and push it closed
from outside.
Inner Handle
Index
Home
89
Security System
QRG Immobilizer System
The immobilizer system prevents a key that has not been pre-registered from starting the engine. Each key contains electronic transmitters that use electronic signals to verify the key.
Pay attention to the following when inserting the key into the ignition switch: · Do not allow objects that emit strong radio waves near the ignition switch. · Make sure the key is not covered by or touching a metal object. TOC · Do not bring a key from another vehicle's immobilizer system near the ignition
switch.
2013 Fit
1Immobilizer System
NOTICE Leaving the ignition key in the vehicle can result in theft or accidental movement of the vehicle. Always take the ignition key with you whenever you leave the vehicle unattended.
Do not alter the system or add other devices to it. Doing so may damage the system and make your vehicle inoperable.
Controls
Security System Alarm*
The security system alarm activates when the doors, tailgate, or hood are opened without the key, or remote transmitter.
1Security System Alarm*
The security alarm continues for a maximum of two minutes until the security system deactivates.
When the security system alarm activates The horn sounds intermittently and all of the exterior lights flash.
To deactivate the security system alarm Unlock the vehicle using the key, or remote transmitter. The system, along with the horn and flashing lights, is deactivated.
Index
Home
90 * Not available on all models
uuSecurity SystemuSecurity System Alarm*
Setting the security system alarm The security system alarm automatically sets when the following conditions have been met: · The ignition switch is in LOCK (0, and the key has been removed from the
ignition switch.
· The hood is closed.
· All doors and the tailgate are locked with the key or the remote transmitter.
When the security system alarm sets The security system alarm indicator in the instrument panel blinks. When the blinking interval changes after about 15 seconds, the security system alarm is set.
To cancel the security system alarm The security system alarm is canceled when the vehicle is unlocked using the key or remote transmitter. The security system alarm indicator goes off at the same time.
2013 Fit
1Security System Alarm* Do not set the security system alarm when someone is in the vehicle or a window is open. The system can accidentally activate when:
· Unlocking the door with the lock tab or the master
door lock switch.
If the battery goes dead after you have set the security system alarm, the security alarm may go off once the battery is recharged or replaced. If this occurs, deactivate the security system alarm by unlocking a door using the key or remote transmitter.
Do not attempt to alter this system or add another device to it.
Controls
QRG TOC
Panic Mode*
PANIC Button
The PANIC button on the remote transmitter
If you press the PANIC button for approximately one second, the following will occur for about 30 seconds: · The horn sounds.
· Some exterior lights flash.
Canceling panic mode Press any button on the remote transmitter, or turn the ignition switch to ON (w.
* Not available on all models
Index
Home
91
Controls
QRG TOC
Index
Opening and Closing the Windows
Opening/Closing the Power Windows
The power windows can be opened and closed when the ignition switch is in ON (w, using the switches on the doors. The driver's side switches can be used to open and close all of the windows.
The power window lock button on the driver's side must be switched off (not pushed in) to open and close the windows from anywhere other than the driver's seat.
When the power window lock button is pushed in, you can only operate the driver's window. Turn the power window lock button on when children are in the vehicle.
Opening/Closing Windows with Auto-Open/Close Function
On
Off Power Window Lock Button
Driver's Window Switch
Automatic operation To open: Push the switch down firmly.
To close: Pull the switch up firmly.
The window opens or closes completely. To stop the window at any time, push or pull the switch briefly.
Manual operation To open: Push the switch down lightly.
To close: Pull the switch up lightly.
Release the switch when the window reaches the desired position.
2013 Fit
1Opening/Closing the Power Windows
3 WARNING
Closing a power window on someone's hands or fingers can cause serious injury.
Make sure your passengers are away from the windows before closing them.
The power windows can be operated for up to 10 minutes after you turn the ignition switch off. Opening either front door cancels this function.
Auto Reverse If a power window senses resistance when closing automatically, it will stop closing and reverse direction.
The driver's window auto reverse function is disabled when you continuously pull up the switch.
The auto reverse function stops sensing when the window is almost closed to ensure that it fully closes.
Home
92
uuOpening and Closing the WindowsuOpening/Closing the Power Windows
Opening/Closing Windows without Auto-Open/Close
Function
Close
To open: Push the switch down. To close: Pull the switch up.
Open
Release the switch when the window reaches the desired position.
2013 Fit
QRG
TOC
Controls
Index
Home
93
Controls
QRG TOC
Operating the Switches Around the Steering Wheel
Ignition Switch
(0 LOCK: Insert and remove the key in this position. (q ACCESSORY: Operate the audio system and other accessories in this position. (w ON: This is the position when driving.
(e START: This position is for starting the engine. The switch returns to ON (w when you let go of the key.
2013 Fit
1Ignition Switch
Manual transmission models
3 WARNING
Removing the key from the ignition switch while driving locks the steering. This can cause you to lose control of the vehicle.
Remove the key from the ignition switch only when parked.
Automatic transmission models
You cannot take the key out unless the shift lever is in (P.
All models
If you open the driver's door when the key is in LOCK (0 or ACCESSORY (q, a warning buzzer will sound to remind you to take the key out. If the key won't turn from LOCK (0 to ACCESSORY (q, turn the key while moving the steering wheel left and right. The steering wheel will unlock, allowing the key to turn.
Index
Home
94
Turn Signals
Right Turn
uuOperating the Switches Around the Steering WheeluTurn Signals
The turn signals can be used when the ignition switch is in ON (w.
2013 Fit
QRG
Left Turn TOC
Controls
Light Switches
High Beams
Flashing the high beams Low Beams
Turns on parking, side marker, tail, and rear license plate lights Turns on headlights, parking, side marker, tail, and rear license plate lights
Rotating the light switch turns the lights on and off, regardless of the position of the ignition switch.
High beams Push the lever forward until you hear a click.
Low beams When in high beams, pull the lever back to return to low beams.
Flashing the high beams Pull the lever back, and release it.
1Light Switches If you remove the key from the ignition switch while the lights are on, a chime sounds when the driver's door is opened.
Do not leave the lights on when the engine is off because it will cause the battery to discharge.
Index
Home
95
uuOperating the Switches Around the Steering WheeluFog Lights*
QRG Fog Lights*
When the low beam headlights are on, turn the fog light switch on to use the fog lights.
2013 Fit
1Fog Lights* When the fog lights are on, the indicator in the instrument panel will be on. 2 Fog Light Indicator* P. 70
Controls
Fog Light Switch TOC
Daytime Running Lights
The high beam headlights come on slightly dimmer than normal when the following conditions have been met: · The ignition switch is in ON (w. · The headlight switch is off, or in . · The parking brake is released.
The lights remain on even if you set the parking brake. Turning off the ignition switch will turn off the daytime running lights.
The high beam headlights return to the original brightness once the headlight switch is turned on.
Index
Home
96 * Not available on all models
Wipers and Washers Front Wiper/Washer
Pull to use washer.
MIST OFF INT: Low speed with intermittent LO: Low speed wipe HI: High speed wipe
uuOperating the Switches Around the Steering WheeluWipers and Washers
The windshield wipers and washers can be used when the ignition switch is in ON (w.
MIST The wipers run at high speed until you release the lever.
Wiper switch (OFF, INT, LO, HI) Change the wiper switch setting according to the amount of rain.
Washer Sprays while you pull the lever toward you. When you release the lever, the wipers make two or three more sweeps before stopping.
2013 Fit
1Wipers and Washers
NOTICE Do not use the wipers when the windshield is dry. The windshield will get scratched, or the rubber blades will get damaged.
NOTICE In cold weather, the blades may freeze to the windshield, becoming stuck. Operating the wipers in this condition may damage the wipers. Use the defroster to warm the windshield, then turn the wipers on.
Turn the washers off if no washer fluid comes out. The pump may get damaged.
Controls
QRG TOC
Continued
Index
Home
97
Controls
QRG TOC
uuOperating the Switches Around the Steering WheeluWipers and Washers
2013 Fit
Rear Wiper/Washer
ON: Intermittent OFF Washer
The rear wiper and washer can be used when the ignition switch is in ON (w.
1Wipers and Washers
If the wiper stops operating due to any obstacle such as the build-up of snow, park the vehicle in a safe place.
Wiper switch (OFF, ON) The wiper operates intermittently after completing a few sweeps.
Washer ( ) Sprays while you rotate the switch to this position.
Hold it to activate the wiper and to spray the washer. Once released, it stops operating after a few more sweeps.
Rotate the wiper switch to OFF, and turn the ignition switch to ACCESSORY (q or LOCK (0, then remove the obstacle.
The wiper motor is equipped with a breaker that may stop motor operation temporarily to prevent an overload. Wiper operation will return to normal within a few minutes, once the circuit has returned to normal.
Operating in reverse When you shift the transmission to (R with the front wiper activated, the rear wiper operates automatically as follows even if its switch is off.
Front Wiper Position
Rear Wiper Operation
INT (Intermittent)
Intermittent
Index
LO (Low speed wipe) HI (High speed wipe)
Continuous
Home
98
uuOperating the Switches Around the Steering WheeluBrightness Control
Brightness Control
Select/Reset Knob
When the parking lights are turned on and the ignition switch is in ON (w, you can use the
(select/reset) knob to adjust instrument panel brightness.
Brighten: Turn the knob to the right.
Dim: Turn the knob to the left.
You will hear a beep when the brightness reaches minimum or maximum. The information display will return to its original state several seconds after you adjust the brightness.
2013 Fit
1Brightness Control Pressing the knob switches the display.
If you turn the knob to the right until the brightness display is up to max, the beeper sounds. This cancels the reduced instrument panel brightness when the exterior lights are on.
The brightness can be set differently for when the exterior lights are on, and when they are off.
Controls
QRG TOC
Brightness level indicator The brightness level is shown on the information display while you are adjusting it.
Index
Home
99
QRG TOC
uuOperating the Switches Around the Steering WheeluRear Defogger/Heated Door Mirror* Button
Rear Defogger/Heated Door Mirror* Button
Models with navigation system
Press the rear defogger and heated door mirror button to defog the rear window and mirrors when the ignition switch is in ON (w.
2013 Fit
1Rear Defogger/Heated Door Mirror* Button
NOTICE When cleaning the inside of the rear window, be careful not to damage the heating wires. It is critical to wipe the window from side to side along the defogger heating wires.
Models without navigation system
This system consumes a lot of power, so turn it off when the window has been defogged. Also, do not use the system for a long period when the engine is idling. This may weaken the battery, making it difficult to start the engine.
Controls
Index
Home
100 * Not available on all models
uuOperating the Switches Around the Steering WheeluAdjusting the Steering Wheel
Adjusting the Steering Wheel
2013 Fit
QRG
The steering wheel height and distance from your body can be adjusted so that you can comfortably grip the steering wheel in an appropriate driving posture.
To adjust
1. Pull the steering wheel adjustment lever up. u The steering wheel adjustment lever is under the steering column.
2. Move the steering wheel up or down, and
1Adjusting the Steering Wheel
3 WARNING
Adjusting the steering wheel position while driving may cause you to lose control of the vehicle and be seriously injured in a crash.
in or out.
Adjust the steering wheel only when the
u Make sure you can see the instrument
vehicle is stopped.
TOC
panel gauges and indicators.
Controls
To lock
3. Push the steering wheel adjustment lever down to lock the steering wheel in position. u After adjusting the position, make sure
Make any steering wheel adjustments before you start driving.
you have securely locked the steering
wheel in place by trying to move it up,
down, in, and out.
Index
Home
101
Adjusting the Mirrors
QRG Interior Rearview Mirror
2013 Fit
Adjust the angle of the rearview mirror when you are sitting in the correct driving 1Adjusting the Mirrors
position.
Keep the inside and outside mirrors clean and
adjusted for best visibility.
Rearview Mirror with Day and Night Positions
Tab
Flip the tab to switch the position.
Up
The night position will help to reduce the glare
Adjust the mirrors before you start driving. 2 Adjusting the Seat Positions P. 103
from headlights behind you when driving
TOC
after dark.
Controls
Daytime Position
Down Night Position
Power Door Mirrors
Selector Switch
Index
Adjustment Switch
Home
102
You can adjust the door mirrors when the ignition switch is in ON (w.
Mirror position adjustment L/R selector switch: Select the left or right mirror. After adjusting the mirror, return the switch to the center position.
Mirror position adjustment switch: Press the switch left, right, up, or down to move the mirror.
Adjusting the Seats
Adjusting the Seat Positions
2013 Fit
QRG
Allow sufficient space.
Adjust the driver's seat as far back as possible while allowing you to maintain full control of the vehicle. You should be able to sit upright,
1Adjusting the Seats
3 WARNING
well back in the seat and be able to
Sitting too close to a front airbag can result
adequately press the pedals without leaning
in serious injury or death if the front
forward, and grip the steering wheel
airbags inflate.
comfortably. The passenger's seat should be
adjusted in a similar manner, so that it is as far Always sit as far back from the front
Move back. back from the front airbag in the dashboard
airbags as possible while maintaining
TOC
as possible.
control of the vehicle.
Adjusting the front seat
Controls
The National Highway Traffic Safety Administration and Transport Canada recommend that drivers allow at least 10 inches (25 cm) between the center of the steering wheel and the chest.
Always make seat adjustments before driving.
1Adjusting the front seat
Once a seat is adjusted correctly, rock it back and forth to make sure it is locked in position.
Horizontal Position Adjustment Pull up on the bar to move the seat, then release the bar.
Driver's seat is shown.
Seat-back Angle Adjustment Pull up the lever to change the angle.
Continued
Index
Home
103
Controls
QRG TOC
uuAdjusting the SeatsuAdjusting the Seat Positions
2013 Fit
Adjusting the Seat-Backs
Adjust the driver's seat-back to a comfortable, upright position, leaving ample space between your chest and the airbag cover in the center of the steering wheel.
The front seat passenger should also adjust their seat-back to a comfortable, upright position.
1Adjusting the Seat-Backs
3 WARNING
Reclining the seat-back too far can result in serious injury or death in a crash.
Adjust the seat-back to an upright position, and sit well back in the seat.
Do not put a cushion, or other object, between the seat-back and your back.
Reclining a seat-back so that the shoulder part of the belt no longer rests against the occupant's chest reduces the protective capability of the belt. It also increases the chance of sliding under the belt in a crash and being seriously injured. The farther a seat-back is reclined, the greater the risk of injury.
Doing so may interfere with proper seat belt or airbag operation.
If you cannot get far enough away from the steering wheel and still reach the controls, we recommend that you investigate whether some type of adaptive equipment may help.
Index
Home
104
uuAdjusting the SeatsuAdjusting the Seat Positions
2013 Fit
QRG
Adjusting the Head Restraints
1Adjusting the Head Restraints
Your vehicle is equipped with head restraints
3 WARNING
in all seating positions.
Improperly positioning head restraints
Head restraints are most effective for protection against whiplash and other rear-
reduces their effectiveness and increases the likelihood of serious injury in a crash.
impact crash injuries when the center of the
Make sure head restraints are in place and
Controls
back of the occupant's head rests against the positioned properly before driving.
TOC
Position head in the center
center of the restraint. The tops of the
of the head restraint.
occupant's ears should be level with the
The driver's and front passenger's seats have active
center height of the restraint.
head restraints.
2 Active Head Restraints P. 107
Adjusting the front head restraint positions To raise the head restraint: Pull it upward.
To lower the head restraint: Push it down while pressing the release button.
Continued
Index
Home
105
uuAdjusting the SeatsuAdjusting the Seat Positions
QRG
Changing the Rear Seat Head Restraint Positions
A passenger sitting in a back seating position should adjust the height of their head restraint to an appropriate position before the vehicle begins moving. To raise the head restraint: Pull it upward. TOC To lower the head restraint: Push it down while pressing the release button.
2013 Fit
Controls
Removing and Reinstalling the Head Restraints
Head restraints can be removed for cleaning or repair.
To remove a head restraint: Pull the restraint up as far as it will go. Then push the release button, and pull the restraint up and out.
To reinstall a head restraint: Insert the legs back in place, then adjust the head restraint to an appropriate height while pressing the release button. Pull up on the restraint to make sure it is locked in position.
WARNING 3 1Removing and Reinstalling the Head Restraints
Failure to reinstall, or correctly reinstall, the head restraints can result in severe injury during a crash.
Always replace the head restraints before driving.
Index
Home
106
uuAdjusting the SeatsuAdjusting the Seat Positions
Active Head Restraints
The driver's and front passenger's seats have active head restraints. In a rear impact, an occupant properly secured by a seat belt will be pushed against the seat-back and the head restraint will move forward. This reduces the distance between the restraint and the occupant's head, which helps reduce the likelihood of whiplash and injuries to the neck and upper spine.
2013 Fit
1Active Head Restraints In order for the active head restraints to operate properly:
· Do not hang any items on the head restraints, or
from the restraint legs.
· Do not place any objects between an occupant and
the seat-back.
· Install each restraint in its proper location.
After a collision, the activated restraint should return to its normal position. If the restraint does not return to its normal position, or in the event of a severe collision, have the vehicle inspected by a dealer.
QRG TOC
Controls
Maintain a Proper Sitting Position
After all occupants have adjusted their seats and head restraints, and put on their seat belts, it is very important that they continue to sit upright, well back in their seats, with their feet on the floor, until the vehicle is safely parked and the engine is off. Sitting improperly can increase the chance of injury during a crash. For example, if an occupant slouches, lies down, turns sideways, sits forward, leans forward or sideways, or puts one or both feet up, the chance of injury during a crash is greatly increased. In addition, an occupant who is out of position in the front seat can be seriously or fatally injured in a crash by striking interior parts of the vehicle or being struck by an inflating front airbag.
1Maintain a Proper Sitting Position
3 WARNING
Sitting improperly or out of position can result in serious injury or death in a crash.
Always sit upright, well back in the seat, with your feet on the floor.
Index
Home
107
uuAdjusting the SeatsuRear Seats
QRG Rear Seats Adjusting the Rear Seat-Backs
Pull the lever on the right to change the angle of the right half of the seat-back, and left for the left half.
2013 Fit
TOC Release Lever
Controls
Folding Down the Rear Seats
Anchor Buckle
1. Unlatch the detachable anchor from the anchor buckle and store the detachable anchor in the retractor housing.
Index
Home
108
Latch Plate
2. Pull the release lever and fold down the seat-back.
Release Lever
1Folding Down the Rear Seats The rear seat-backs can be folded down to accommodate bulkier items in the cargo area.
Never drive with a seat-back folded down and the tailgate open.
2 Exhaust Gas Hazard P. 61
To lock a seat-back upright, push it backwards until it locks. When returning a seat-back to it's original position, push it firmly back. Also, make sure all rear shoulder belts are positioned in front of the seatback, and the center shoulder belt is re-positioned in the guide.
Make sure that the folded seat-back does not press against the front passenger seat, as this can cause the front passenger seat weight sensor to work improperly.
2 Side Airbag Off Indicator P. 47
uuAdjusting the SeatsuRear Seats
Folding the Rear Seat Up
Separately lift up the left and right halves of the rear seat cushions to make room for cargo area.
Lifting up the seat cushion 1. Make sure the seat belt buckles are in their
loops on the seat.
2013 Fit
1Folding the Rear Seat Up After you fold the seat up, or put it back in the original position, make sure the seat is firmly secured by rocking it forward and back.
Check if there are any items on the seat before you pull the seat cushion up. Check if there are any obstacles around the floor guide before you put the seat back in the original position.
QRG TOC
Controls
Loop
2. Pull up the rear seat cushion.
3. Fold the seat leg down. 4. Push the seat cushion firmly against the
seat-back to lock it.
Seat Leg Seat Leg
Latch Floor Guide
Putting the seat in the original position 1. Hold the seat cushion in the upright
position, and pull up the seat leg fully. u The seat cushion can abruptly fall down
once you pull up the seat leg.
2. Slowly put down the seat cushion and set the seat leg in the floor guide. u A latch comes out when the leg is set properly.
Index
Home
109
Controls
uuAdjusting the SeatsuArmrest
QRG Armrest Using the Driver's Seat Armrest*
Pull down the armrest.
TOC
Index Home
110 * Not available on all models
2013 Fit
Interior Lights/Interior Convenience Items
Interior Lights Interior Light Switch
Door Activated Position On
Off
ON The interior light comes on regardless of whether the doors are open or closed.
Door activated The interior light comes on in the following situations: · When any of the doors are opened. · You unlock the driver's door. · You remove the key from the ignition
switch.
OFF The interior light remains off regardless of whether the doors are open or closed.
Map Lights*
The map lights can be turned on and off by pressing the lenses.
2013 Fit
1Interior Light Switch In the door activated position, the interior light fades out and goes off about 30 seconds after the doors are closed. The light goes off after 30 seconds in the following situations:
· When you unlock the driver's door but do not open
it.
· When you remove the key from the ignition switch
but do not open a door.
QRG TOC
Controls
The interior light goes off immediately in the following situations:
· When you lock the driver's door. · When you close the driver's door with the key in
the ignition switch.
· When you turn the ignition switch to ON (w.
If you leave any of the doors open without the key in the ignition switch, the interior light goes off after about 15 minutes.
* Not available on all models
Continued
Index
Home
111
uuInterior Lights/Interior Convenience ItemsuInterior Lights
QRG
Cargo Area Light
The light comes on when you open the tailgate.
TOC
2013 Fit
Controls
Index
Home
112
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items
Interior Convenience Items
Glove Box
Pull the handle to open the glove box.
1Glove Box
2013 Fit
QRG
3 WARNING
An open glove box can cause serious injury to your passenger in a crash, even if the passenger is wearing the seat belt.
Always keep the glove boxes closed while
driving.
TOC
Controls
Upper Glove Box
Pull up on the lever to open the upper glove box.
Continued
Index
Home
113
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items
QRG
Beverage Holders
Front seat beverage holders
TOC
2013 Fit
1Beverage Holders NOTICE Spilled liquids can damage the upholstery, carpeting, and electrical components in the interior.
Be careful when you are using the beverage holders. Hot liquid can scald you.
Controls
Index
Home
114
Rear seat beverage holders
Cargo Floor Box*
Cargo Floor Box
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items
2013 Fit
QRG
Pull up the strap and open the cargo area floor lid.
TOC Strap
Controls
Accessory Power Socket
The accessory power socket can be used when the ignition switch is in ACCESSORY (q or ON (w.
Open the cover to use it.
1Accessory Power Socket
NOTICE Do not insert an automotive type cigarette lighter element. This can overheat the power socket.
The accessory power socket is designed to supply power for 12 volt DC accessories that are rated 120 watts or less (10 amps).
To prevent battery drain, only use the power socket with the engine running.
* Not available on all models
Continued
Index
Home
115
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items
QRG
Coat Hook
There is a coat hook on the rear left grab handle. Pull it down to use it.
2013 Fit
1Coat Hook The coat hook is not designed for large or heavy items.
Controls
TOC
Seat Under Box
Located at the back of the driver's side rear seat cushion. 1. Fold up the driver's side rear seat.
2 Folding the Rear Seat Up P. 109
2. Turn the knobs to open the box. Align the dot marks on the knobs and the box cover when closing the box.
Index
Home
116
Cargo Hooks*
Hook
Hook
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items
Use floor cargo hooks to secure luggage in the cargo area.
2013 Fit
1Cargo Hooks*
NOTICE Do not hang a large object or an object that weighs more than 2.2 lbs (1 kg) on the side cargo hooks. Hanging heavy or large objects may damage the hooks.
QRG
TOC
Controls
There are also hooks on both sides of the cargo area.
Hook
* Not available on all models
Index
Home
117
Heating and Cooling*
QRG Using Vents, Heating and A/C*
2013 Fit
Controls
TOC
Dashboard vents
Dashboard and floor vents
Floor vents
Floor and defroster vents
Defroster vents
Fan Control Dial Adjusts the fan speed. Rotate the dial all the way to OFF to turn everything off.
Temperature Control Dial Adjusts the interior temperature.
Mode Control Dial Change airflow.
A/C Button* Press to cool the interior or dehumidify while heating.
Index
Home
118 * Not available on all models
Fresh Air/Recirculation Lever This lever controls the source of the air going into the system.
(Recirculation) Mode: Recirculates air from the vehicle's interior through the system.
(Fresh Air) Mode: Maintains outside ventilation. Keep the system in fresh air mode in normal situations.
Heating
uuHeating and Cooling*uUsing Vents, Heating and A/C*
2013 Fit
QRG
The heater uses heat from the engine coolant to warm the air.
1. Adjust the fan speed using the fan control dial.
2. Select and .
3. Adjust the temperature using the
TOC
temperature control dial.
Controls
To rapidly warm up the interior 1. Set the fan to the maximum speed. 2. Select . 3. Set the temperature to maximum heat. 4. Select .
1To rapidly warm up the interior
Change to fresh air mode as soon as the interior gets warm enough. The windows may fog up if kept in recirculation mode.
To dehumidify the interior* When used in combination with the heater, the air conditioning system makes the interior warm and dry and can prevent the windows from fogging up. 1. Turn the fan on.
2. Press the A/C button to turn on the air conditioning.
3. Select and . Adjust the temperature to your preference.
Index
* Not available on all models
Continued
Home
119
uuHeating and Cooling*uUsing Vents, Heating and A/C*
QRG
Cooling*
TOC
2013 Fit
1. Adjust the fan speed using the fan control dial.
2. Select and . 3. Adjust the temperature using the
temperature control dial.
4. Press the A/C button (the indicator on).
1To rapidly cool down the interior
If the interior is very warm, you can cool it down more rapidly by partially opening the windows.
Controls
To rapidly cool down the interior 1. Set the fan to the maximum speed. 2. Set the temperature to maximum cool. 3. Select .
Defrosting the Windshield and Windows*
1. Select turns the air conditioning system on.
2. Select .
Index
Home
120 * Not available on all models
To rapidly defrost the windows 1. Set the fan to the maximum speed.
2. Select . 3. Select . 4. Set the temperature to maximum heat.
1Defrosting the Windshield and Windows*
For your safety, make sure you have a clear view through all the windows before driving. Do not set the temperature near the upper or lower limit. When cold air hits the windshield, the outside of the windshield may fog up. If the side windows fog up, adjust the vents so that the air hits the side windows.
1To rapidly defrost the windows
After defrosting the windows, switch over to fresh air mode. If you keep the system in recirculation mode, the windows may fog up from humidity. This impedes visibility.
2013 Fit
QRG
Features
This chapter describes how to operate technology features.
* Not available on all models
Audio System About Your Audio System................ 122 USB Adapter Cable* ........................ 123 Auxiliary Input Jack .......................... 123 Audio Antenna ................................ 124 Audio System Theft Protection ......... 124
Audio System Basic Operation ........ 125 Adjusting the Sound ........................ 126 Playing the FM/AM Radio................. 127 Playing a CD .................................... 129 Playing an iPod®*............................. 131 Playing a USB Flash Drive* ............... 133
Audio Error Messages CD Player......................................... 135 iPod®/USB Flash Drive*..................... 136
General Information on the Audio System Recommended CDs ......................... 137 Compatible iPod® and USB Flash Drives* .139
Bluetooth® HandsFreeLink®* Using HFL ........................................ 140 HFL Menus ...................................... 142
Index
Home
121
Audio System
QRG About Your Audio System
2013 Fit
On models with navigation system, see the Navigation System Manual for operation 1About Your Audio System
of the audio system, and Bluetooth®HandsFreeLink®.
Video CDs, DVDs, and 3-inch (8-cm) mini CDs are not supported.
The audio system features FM/AM radio. It can also play audio CDs, WMA/MP3/AAC files, iPod®, and USB flash drives.
iPod® is a registered trademark owned by Apple Inc.
You can operate the audio system from the buttons and switches on the panel.
State or local laws may prohibit the operation of handheld electronic devices while operating a vehicle.
Features
TOC
Auxiliary Input Jack
iPod®
USB Flash Drive
Index
Home
122
uuAudio SystemuUSB Adapter Cable*
USB Adapter Cable*
1. Unclip the USB connector and loosen the adapter cable.
2. Install the iPod® dock connector or the USB flash drive to the USB connector.
2013 Fit
1USB Adapter Cable*
· Do not leave the iPod® or USB flash drive in the
vehicle. Direct sunlight and high temperatures may damage it.
· Do not use an extension cable with the USB
adapter cable.
· Do not connect the iPod® or USB flash drive using a
hub.
· Do not use a device such as a card reader or hard
disk drive, as the device or your files may be damaged.
· We recommend backing up your data before using
the device in your vehicle.
· Displayed messages may vary depending on the
device model and software version.
QRG TOC
Features
Auxiliary Input Jack
Use the jack to connect standard audio devices. 1. Open the AUX cover.
2. Connect a standard audio device to the input jack using a 1/8 inch (3.5 mm) stereo miniplug. u The audio system automatically switches to the AUX mode.
If the audio system does not recognize the iPod®, try reconnecting it a few times or reboot the device. To reboot, follow the manufacturer's instructions provided with the iPod® or visit www.apple.com/ ipod.
1Auxiliary Input Jack To switch the mode, press any of the audio mode buttons. You can return to the AUX mode by pressing the AUX button.
You cannot use the auxiliary input jack if you replace the audio system.
Index
* Not available on all models
Home
123
uuAudio SystemuAudio Antenna
QRG Audio Antenna
Your vehicle is equipped with a removable antenna at the rear of the roof.
2013 Fit
1Audio Antenna
NOTICE Before using a "drive-through" car wash, remove the antenna by unscrewing it by hand. This prevents the antenna from being damaged by the car wash brushes.
Features
TOC Index
Audio System Theft Protection
The audio system is disabled when it is disconnected from the power source, such as when the battery is disconnected or goes dead.
Entering the Audio Security Code ENTER CODE appears on the display when the power is reconnected.
1. Turn on the audio system.
2. Enter the security code using the preset buttons.
Models with navigation system
Touch the icon to enter the code, then touch the Done icon to set it. If you enter an incorrect digit, continue to the last digit, then try again. If you do not enter the code correctly after 10 tries, leave the system for one hour before trying again, or visit a dealer to have the system reset.
1Audio System Theft Protection Find the audio system's security code and serial number in your owner's manual kit.
We recommend that you write down the serial number in this owner's manual.
Do not store the label in your vehicle. If you lose the label, you must first retrieve the serial number, and then obtain the code.
You can find out about your serial number and security code from a dealer.
U.S. models
You can register the security code at Owner Link (owners.honda.com), and find information on how to retrieve the serial number and obtain the code at radio-navicode.honda.com.
Home
124
Audio System Basic Operation
To use the audio system function, the ignition switch must be in ACCESSORY (q or ON (w.
Use the selector knob to access some audio functions.
Button
Selector Knob
Selector knob: Rotate left or right to scroll
through the available choices. Press to set your selection.
button: Press to go back to the previous display.
2013 Fit
1Audio System Basic Operation These indications are used to show how to operate the selector knob. Rotate to select. Press to enter.
QRG TOC
Features
Index
Home
125
QRG TOC
uuAudio System Basic OperationuAdjusting the Sound
Adjusting the Sound
Selector Knob
2013 Fit
Press the
(sound) button, and rotate
to adjust the setting.
Each time you press the
button, a sound
mode switches as follows.
1Adjusting the Sound When the adjustment level reaches the center, you will see C in the display.
The SVC has four modes: OFF, LOW, MID, and HIGH. SVC adjusts the volume level based on the vehicle speed. As you go faster, audio volume increases. As you slow down, audio volume decreases.
Button
Features
BASS is selectable.
Speed-sensitive Volume Compensation
Index
Home
126
Playing the FM/AM Radio
/
Buttons
Press to display and select an
RDS category.
(Power) Button
Press to turn the audio system on and off.
FM/AM Button Press to select a band.
TITLE Button Press to switch the RDS name on and off.
/ (Seek) Buttons Press to change a station. Press and hold to search up and down
the selected band for a station with a strong signal.
uuAudio System Basic OperationuPlaying the FM/AM Radio
2013 Fit
QRG
A.SEL (Auto Select) Button Press to scan both bands and store the strongest station in each preset. To turn off auto select, press the button again. This restores the presets you originally set.
Preset Buttons (1-6)
To store a station:
1. Tune to the selected station.
TOC
Features
2. Pick a preset button and hold it
until you hear a beep.
To listen to a stored station, select a band, then press the preset button.
Selector Knob Turn to adjust the volume. Press and turn to tune the radio frequency.
SCAN Button
Press to sample each of the strongest stations on the selected band for 10 seconds. To turn off scan, press the button again.
Index
Home
Continued 127
QRG TOC
uuAudio System Basic OperationuPlaying the FM/AM Radio
2013 Fit
Radio Data System (RDS)
Provides text data information related to your selected RDS capable FM station.
RDS INFO ON Press the TITLE button while listening to an RDS capable station. RDS INFO ON appears, and the station name is displayed.
To find an RDS station from your selected program category
1. Press the /
button to display and
RDS Category
select an RDS category.
2. Use SEEK or SCAN function to select an RDS station.
1Playing the FM/AM Radio The ST indicator appears on the display indicating stereo FM broadcasts. Stereo reproduction in AM is not available.
You can store six AM stations and twelve FM stations into the preset button memory. FM1 and FM2 let you store six stations each.
A.SEL function scans and stores up to six AM stations and twelve FM stations with a strong signal into the preset button memory.
If you do not like the stations auto select has stored, you can manually store your preferred frequencies.
Features
Index
Home
128
Playing a CD
Your audio system supports audio CDs, CD-Rs, and CD-RWs in either MP3 or WMA format. With the CD loaded, press the CD button.
CD Slot Insert a CD about halfway into the CD slot.
Selector Knob Turn to adjust the volume. Press and turn to change tracks/files or select an item, then press to set your selection.
/
Buttons
Press to change folders (MP3 or WMA).
(Power) Button
Press to turn the audio system on and off.
TITLE Button Press to display the CD's text data if it was recorded. Each time you press the button, the text data information changes.
CD Button Press to play a CD.
/ (Seek) Buttons Press to change tracks (files in MP3 or WMA).
uuAudio System Basic OperationuPlaying a CD
2013 Fit
QRG
RPT (Repeat) Button Press to replay a track/file continuously. Press two times to replay all files in the
current folder. To turn off repeat, press and hold the
button.
RDM (Random) Button
Press to play all tracks/files on a disc in
random order.
TOC
Features
Press two times to play all files in the
current folder (MP3 or WMA) in random
order.
To turn off random, press and hold the
button.
(CD Eject) Button Press to eject a CD.
SCAN Button You will get a 10-second sampling of each song. Press to sample all tracks on the CD (all
files in the current folder in MP3 or WMA). Press two times to sample the first file in
each of the main folders (MP3 or WMA). To turn off scan, press and hold the
button.
Index Home
Continued 129
Features
QRG TOC
uuAudio System Basic OperationuPlaying a CD
2013 Fit
How to Select a File from a Folder with the Selector Knob
(MP3/WMA)
1. Press to switch the display to a folder list.
1Playing a CD
NOTICE Do not use CDs with adhesive labels. The label can cause the CD to jam in the unit.
WMA files protected by digital rights management (DRM) cannot be played. The audio system displays UNSUPPORTED, then skips to the next file.
Folder Selection
2. Rotate to select a folder.
Text data appears on the display under the following
circumstances:
· When you select a new folder, file, or track. · When you change the audio mode to CD. · When you insert a CD.
Track Selection
3. Press to change the display to a list of files in that folder.
4. Rotate to select a file, then press .
The display shows up to 31 characters of text data. Press and hold the TITLE button to see additional characters. indicates that the text data continues. The display goes back to the previous screen if you press and hold the button again.
If you eject the CD but do not remove it from the slot, the system reloads the CD automatically after several seconds.
Index
Home
130
Playing an iPod®*
Connect the iPod® using your dock connector to the USB adapter cable, then press the AUX button.
2 USB Adapter Cable* P. 123
uuAudio System Basic OperationuPlaying an iPod®*
2013 Fit
QRG
/
Buttons
Press
to go back to the
previous display.
Press
to set your
selection.
USB Indicator
Comes on when an iPod® is connected.
(Power) Button
Press to turn the audio system on and off.
TITLE Button Press to display the text data.
/ (Seek) Buttons Press to change songs.
* Not available on all models
AUX Button Press to select iPod® (if connected).
RDM (Random) Button
Press to play all available files in a
selected list (playlists, artists, albums
or songs) in random order.
TOC
Features
Press two times to play all available
albums in a selected list (playlists,
artists, albums or songs) in random
order.
To turn off shuffle mode, press and
hold the button.
Selector Knob Turn to adjust the volume. Press and turn to select an item, then press to set your selection.
RPT (Repeat) Button Press to replay a file continuously. To turn off repeat, press the
button again.
Index
Home
Continued 131
uuAudio System Basic OperationuPlaying an iPod®* QRG
How to Select a File from the iPod® Menu
1. Press to display the iPod® menu.
2. Rotate to select a menu. TOC
2013 Fit
1Playing an iPod®* Available operating functions vary on models or versions. Some functions may not be available on the vehicle's audio system.
If there is a problem, you may see an error message on the audio display.
2 iPod®/USB Flash Drive* P. 136
Features
3. Press to display the items on that menu. 4. Rotate to select an item, then press .
Index
Home
132 * Not available on all models
uuAudio System Basic OperationuPlaying a USB Flash Drive*
Playing a USB Flash Drive*
Your audio system reads and plays sound files on a USB flash drive in either MP3, WMA or AAC*1 format. Connect your USB flash drive to the USB adapter cable, then press the AUX button.
2 USB Adapter Cable* P. 123
2013 Fit
QRG
Selector Knob Turn to adjust the volume. Press and turn to select an item, then press to set your selection.
/
Buttons
Press
to skip to the next
folder, and
to skip to the
beginning of the previous
folder.
(Power) Button
Press to turn the audio system on and off.
USB Indicator
Comes on when a USB flash drive is connected.
/ (Seek) Buttons Press to change files.
*1:Only AAC format files recorded with iTunes® are playable on this unit.
* Not available on all models
AUX Button Press to select USB flash drive (if connected).
RPT (Repeat) Button Press to replay a file continuously. Press two times to replay all files in the
current folder. To turn off repeat, press and hold the
button.
RDM (Random) Button Press to play all files in random order. Press two times to play all files in the
current folder in random order. To turn off random, press and hold the
button.
SCAN Button You will get a 10-second sampling of each file. Press to sample all files in the current folder. Press two times to sample the first file in each
of the main folders. To turn off scan, press and hold the button.
Features
TOC Index
Home
Continued 133
QRG TOC
uuAudio System Basic OperationuPlaying a USB Flash Drive*
2013 Fit
How to Select a File from a Folder with the Selector Knob
1. Press to switch the display to a folder list.
1Playing a USB Flash Drive*
Use the recommended USB flash drives. 2 General Information on the Audio System P. 137
Folder Selection
2. Rotate to select a folder.
Files in WMA format protected by digital rights management (DRM) are not played. The audio system displays UNPLAYABLE FILE, and then skips to the next file.
If there is a problem, you may see an error message on the audio display.
2 iPod®/USB Flash Drive* P. 136
Features
Track Selection
3. Press to change the display to a list of files in that folder.
4. Rotate to select a file, then press .
Index
Home
134 * Not available on all models
Audio Error Messages
CD Player
If a disc error occurs, you may see the following error messages.
2013 Fit
QRG
Error Message
Cause
Solution
HEAT ERROR
High temperature
Turn the audio system off and allow the player to cool down until the error message is cleared.
UNSUPPORTED
Track/file format not supported
Current track/file will be skipped. The next supported track/file plays automatically.
BAD DISC PLEASE CHECK OWNERS MANUAL PUSH EJECT
Mechanical error
BAD DISC PLEASE CHECK OWNERS MANUAL
Servo error
Press the (eject) button and remove the disc, and check that the
error message is cleared.
Check that the disc is not damaged or deformed, and insert the
TOC
disc again.
Features
2 Protecting CDs P. 138
If the error message reappears, press the button, and pull out
the disc.
Insert a different disc.
If the new disc plays, there is a problem with the first disc.
If the error message repeats, or the disc cannot be removed,
contact a dealer.
Do not try to force the disc out of the player.
BAD DISC PLEASE CHECK OWNERS MANUAL
Disc error
Check that the disc is not damaged or deformed.
2 Protecting CDs P. 138
Index
Home
135
uuAudio Error MessagesuiPod®/USB Flash Drive*
QRG iPod®/USB Flash Drive*
If an error occurs while playing an iPod® or USB flash drive, you may see the following error messages. If you cannot clear the error message, contact a dealer.
2013 Fit
Error Message
Solution
USB ERROR
Appears when there is a problem with the USB adapter unit. Check if the device is compatible with the USB adapter unit.
BAD USB DEVICE PLEASE CHECK OWNERS MANUAL
Appears when an incompatible device is connected. Disconnect the device. Then turn the audio system off, and turn it on again. Do not reconnect the device that caused the error.
iPod NO SONG TOC
UNSUPPORTED VER.
Appears when the iPod® is empty. Check that compatible files are stored on the device.
Appears when an unsupported iPod® is connected. If it appears when a supported iPod® is connected, update the iPod® software to the newer version.
Features
CONNECT RETRY
Appears when the system does not acknowledge the iPod®. Reconnect the iPod®.
UNPLAYABLE FILE
Appears when the files in the USB flash drive are DRM or an unsupported format. This error message appears for about 3 seconds, then plays the next song.
USB NO SONG
Appears when the USB flash drive is empty or there are no MP3, WMA, or AAC files in the USB flash drive. Check that compatible files are stored on the device.
UNSUPPORTED
Appears when an unsupported device is connected. If it appears when a supported device is connected, reconnect the device.
Index
Home
136 * Not available on all models
General Information on the Audio System
Recommended CDs
· Use only high-quality CD-R or CD-RW discs labeled for audio use. · Use only CD-R or CD-RW discs on which the recordings are closed. · Play only standard round-shaped CDs.
The CD packages or jackets should have one of these marks.
2013 Fit
1Recommended CDs A Dual-disc cannot play on this audio unit. If recorded under certain conditions, a CD-R or CD-RW may not play either.
QRG
CDs with MP3 or WMA files
TOC
Features
· Some software files may not allow for audio play or text data display.
· Some versions of MP3 or WMA formats may be unsupported.
Continued
Index
Home
137
uuGeneral Information on the Audio SystemuRecommended CDs
QRG
Protecting CDs Follow these precautions when handling or storing CDs: · Store a CD in its case when it is not being played. · When wiping a CD, use a soft clean cloth from the center to the outside edge. · Handle a CD by its edge. Never touch either surface. · Never insert foreign objects into the CD player. · Keep CDs out of direct sunlight and extreme heat. · Do not place stabilizer rings or labels on the CD. TOC · Avoid fingerprints, liquids, and felt-tip pens on the CD.
2013 Fit
1Protecting CDs
NOTICE Do not insert a damaged CD. It may be stuck inside and damage the audio unit.
Examples: Bubbled, wrinkled, labeled, and
excessively thick CDs
Bubbled/ Wrinkled
With Label/ Sticker
Using Printer Label Kit
Sealed With Plastic Ring
Damaged CDs
Poor quality CDs
Features
Chipped/ Cracked Small CDs
Warped
Burrs
3-inch (8-cm) CD
Index
Home
138
uuGeneral Information on the Audio SystemuCompatible iPod® and USB Flash Drives*
Compatible iPod® and USB Flash Drives*
iPod® Model Compatibility
Model iPod classic® 80GB/160GB
iPod classic® 120GB iPod classic® 160GB (launch in 2009)
iPod® (5th generation) iPod nano® iPod touch®
2013 Fit
1iPod® Model Compatibility This system may not work with all software versions of these devices.
QRG
USB Flash Drives
· Use a recommended USB flash drive of 256 MB or higher. · Some digital audio players may not be compatible. · Some USB flash drives (e.g., a device with security lockout) may not work. · Some software files may not allow for audio play or text data display. · Some versions of MP3, WMA, or AAC formats may be unsupported.
1USB Flash Drives
TOC
Files on the USB flash drive are played in their stored order. This order may be different from the order displayed on your PC or device.
Features
* Not available on all models
Index
Home
139
Features
QRG TOC
Bluetooth® HandsFreeLink®*
2013 Fit
Models with navigation system
For models with the navigation system, see Navigation System Manual for how to operate the Bluetooth® HandsFreeLink®.
Models without navigation system
Bluetooth® HandsFreeLink® (HFL) allows you to place and receive phone calls using your vehicle's audio system, without handling your cell phone.
Using HFL
HFL Buttons
(HFL Talk) Button
Microphone
1Bluetooth® HandsFreeLink®*
To use HFL, you need a Bluetooth-compatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities:
· Canada: Visit www.handsfreelink.ca, or call
(888) 528 -7876.
Voice control tips
· Aim the vents away from the ceiling and close the
windows, as noise coming from them may interfere with the microphone.
· Press and release the button before giving a
command. Speak clearly and naturally after a beep.
· If the microphone picks up voices other than yours,
the command may be misinterpreted.
· A command that consists of several words can be
spoken together. For example, say "Call 123-456-7890" at once.
· To change the volume level, use the audio system's
volume knob.
(HFL Back) Button
Volume Knob
State or local laws may prohibit the operation of handheld electronic devices while operating a vehicle.
Index
(HFL Talk) button: Press to go directly to give a command or to answer an incoming call.
(HFL Back) button: Press to end a call or to cancel a command.
Home
140 * Not available on all models
uuBluetooth® HandsFreeLink®*uUsing HFL
2013 Fit
Help Features
· To hear general HFL information and help, say "Tutorial." · Say "Hands free help" or "Help" any time to get help or hear a list of commands.
1Bluetooth® HandsFreeLink®*
Bluetooth® Wireless Technology The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Honda Motors Co., Ltd., is under license. Other trademarks and trade names are those of their respective owners.
QRG
Information Display
Bluetooth Indicator comes on the audio
Bluetooth Indicator
display when your phone is connected to HFL.
TOC
Features
* Not available on all models
Index
Home
141
uuBluetooth® HandsFreeLink®*uHFL Menus
QRG HFL Menus
The ignition switch must be in ACCESSORY (q or ON (w to use HFL.
To use HFL, you must first pair your Bluetooth-compatible cell phone to the system while the vehicle is parked.
Press the (HFL Talk) button each time you give a command
"Phone setup"
"Pair"
Pair a phone to the system.
"Edit"
Edit the name of a paired phone.
"Delete"
Delete a paired phone from the system.
TOC
"List"
Hear a list of all phones paired to the system.
"Status"
Hear which paired phone is currently linked to the system.
Features
"Call"/"Dial"
"Next phone"
Search for another phone that has been paired.
"Set pairing code"
Set the pairing code to either "Fixed" or "Random."
e.g.: "123-456-####" Say a phone number.
e.g.: "Jim Smith"
Say a name after a phonebook entry is stored.
2013 Fit
"Redial"
Redial the last number called.
"Transfer"
Transfer a call from HFL to your phone or from your phone to HFL.
Index
"Mute" "Send"
Mute your voice to the person at the other end of the call. Send numbers or names during a call.
Home
142 * Not available on all models
uuBluetooth® HandsFreeLink®*uHFL Menus
2013 Fit
QRG
"Phonebook" "System setup"
"Store"
Store a phonebook entry.
"Edit"
Edit the number of an existing phonebook entry.
"Delete"
Delete a phonebook entry.
"List"
Hear a list of all stored phonebook entries.
"Receive contact"*
Transfer contacts from your phone to HFL.
TOC
"Security"
Apply a security passcode to the system that must be input at each key
cycle to access the system.
Features
"Change passcode" "Call notification" "Auto transfer"
Change your security passcode.
Set how you want to be notified of an incoming call.
Set to automatically transfer calls from your phone to HFL when you enter the vehicle.
"Clear"
Clear the system of all paired phones, phonebook entries, and security passcode.
"Change language" "Tutorial" "Hands-free help"
Switch the system language between English and French. Hear a tutorial for general rules on using the system. Hear a list of available commands and additional information describing each command.
* Not available on all models
Index
Home
Continued 143
uuBluetooth® HandsFreeLink®*uHFL Menus
QRG
Phone Setup
To pair a cell phone 1. If no phone has been paired to the system before, HFL gives you information
about how to pair the first phone. If a phone has already been paired: say "Phone Setup" and "Pair" after the HFL prompts.
2. Follow the HFL prompts and put your phone in discovery or search mode. u HFL gives you a four-digit code and begins searching for your phone.
3. When your phone finds a Bluetooth® device, select HFL from the options and
TOC
enter the four-digit code.
4. Follow the HFL prompts and name the newly paired phone.
Features
To rename a paired phone 1. Say "Phone Setup."
2. Say "Edit" after the prompts.
3. Follow the HFL prompts and rename the phone. u If there is more than one phone paired to the system, HFL will ask you which phone's name you want to change.
To delete a paired phone 1. Say "Phone Setup."
Index Home
2. Say "Delete" after the prompts.
3. Follow the HFL prompts. u HFL will ask you which phone you want to delete.
144
2013 Fit
1Phone Setup Press the button and wait for a beep before giving a command.
Your Bluetooth-compatible phone must be paired to HFL before you can make and receive hands-free calls.
Phone Pairing Tips:
· You cannot pair your phone while the vehicle is
moving.
· Up to six phones can be paired. · Your phone's battery may drain faster when it is
paired to HFL.
· If your phone is not ready for pairing or not found
by the system within three minutes, the system will time out and returns to idle.
uuBluetooth® HandsFreeLink®*uHFL Menus
To hear the name of all paired phones 1. Say "Phone Setup." 2. Say "List" after the prompts. 3. HFL reads out all the paired phones' names.
To hear which paired phone is currently linked 1. Say "Phone Setup." 2. Say "Status" after the prompts. 3. HFL will tell you which phone is linked with the system.
To change the currently linked phone 1. Say "Phone Setup." 2. Say "Next Phone" after the prompts. 3. HFL disconnects the current phone, and searches for another paired phone. 4. Once another phone is found, it is connected to the system. HFL will inform you
which phone is now linked.
2013 Fit
1Phone Setup If no other phones are found or paired when trying to switch to another phone, HFL will inform you that the original phone is linked again.
The "Status" and "Next Phone" commands use: Only one paired phone at a time can be linked to HFL. When there are two or more paired phones in the vehicle, the first paired phone that the system finds is linked.
Features
QRG TOC
To change the pairing code setting 1. Say "Phone Setup." 2. Say "Set Pairing Code" after the prompts. 3. If you want HFL to create a random code each time you pair a phone, say
"Random." If you want to create your own four-digit code, say "Fixed." 4. Follow the HFL prompts.
Continued
Index
Home
145
uuBluetooth® HandsFreeLink®*uHFL Menus
QRG
2013 Fit
Making a Call
You can make calls using any phone number or a name in the HFL phonebook, and redial the last number called.
Direct dialing a phone number 1. Say "Call" or "Dial." 2. Say the number you want to dial after the prompts. 3. Say "Call" or "Dial" after the prompts.
1Making a Call Press the button and follow the prompts.
HFL uses a Class 2 Bluetooth, with has a maximum range of about 30 feet (10 meters).
HFL allows you to talk up to 30 minutes after you remove the key from the ignition switch. However, this may weaken the vehicle's battery.
Features
TOC From the HFL phonebook 1. Say "Call" or "Dial."
2. Say the name stored in the HFL phonebook after the prompts.
3. Follow the HFL prompts.
To redial the last number called by HFL Say "Redial."
To end a call Press the (HFL back) button.
Index
Home
146
uuBluetooth® HandsFreeLink®*uHFL Menus
2013 Fit
Receiving a Call
Press the button to answer the call, or the button to hang up. When there is an incoming call, a call notification (if activated) sounds and a message appears on the display.
Transferring a Call
You can transfer a call from HFL to your phone, or from your phone to HFL. Press the button and say "Transfer."
Muting a Call
To mute or unmute your voice during a call, press and release the say "Mute."
button and
Sending Numbers or Names During a Call
You can send numbers and names during a call. This is useful when calling a menudriven phone system.
1Receiving a Call
Call Waiting Press the button and put the original call on hold to answer the incoming call.
Press the call.
button again to return to the original
Ignore the incoming call if you do not want to answer it.
Press the button if you want to hang up the original and answer the incoming call.
1Sending Numbers or Names During a Call Press the button before a command.
To send a # , say "Pound." To send a * , say "Star."
Features
QRG TOC
To send a number or name during a call 1. Say "Send."
2. Say the number or name you want to send after the prompts.
3. Follow the HFL prompts.
Index
* Not available on all models
Continued
Home
147
QRG TOC
uuBluetooth® HandsFreeLink®*uHFL Menus
HFL Phonebook
You can store up to 50 names with their associated numbers in HFL. The numbers you store can be account numbers or passwords. These numbers can be sent to an automated phone system.
To store a phonebook entry 1. Say "Phonebook." 2. Say "Store" after the prompts. 3. Say a name you want to list as your phonebook entry. 4. Say the number you want to store for the name entry. 5. Follow the HFL prompts and say "Enter" to store the entry.
2013 Fit
1HFL Phonebook
· Avoid using duplicate name entries. · Avoid using "home" as a name entry. · It is easier for HFL to recognize a multisyllabic or
longer name. For example, use "Peter" instead of "Pete," or "John Smith" instead of "John."
Features
To edit the number stored for a name 1. Say "Phonebook." 2. Say "Edit" after the prompts. 3. Say a name you want to edit. When asked, say the new number for that name. 4. Follow the HFL prompts and say "Enter" to store the entry.
Index
Home
148 * Not available on all models
To delete a name 1. Say "Phonebook." 2. Say "Delete" after the prompts. 3. Say a name you want to delete. 4. Say "Yes," and follow the HFL prompts.
To list all names in the phonebook 1. Say "Phonebook." 2. Say "List" after the prompts. 3. HFL begins reading the names in the order they were stored. 4. When you hear a name you want to call, say "Call."
To store a specific phone number from your cell phone directly to the HFL phonebook *
1. Say "Phonebook." 2. Say "Receive Contact" after the prompts. 3. Follow the HFL prompts, select a number from your cell phone, and send it to HFL. 4. Follow the HFL prompts and name the number, or say "Discard" if it is not the
number you want to store. 5. Follow the HFL prompts to continue.
* Not available on all models
Continued
uuBluetooth® HandsFreeLink®*uHFL Menus
2013 Fit
QRG
TOC
Index Home
149
Features
Features
uuBluetooth® HandsFreeLink®*uHFL Menus
QRG
System Setup
This command group allows you to change or customize HFL basic settings.
To set a four-digit passcode to lock the HFL system for security 1. Say "System Setup." 2. Say "Security." 3. Follow the HFL prompts and say the four-digit number of your choice. 4. Follow the HFL prompts and confirm the number. TOC To change the security passcode 1. Say "System Setup." 2. Say "Change Passcode" after the prompts. 3. Say the new four-digit passcode after the HFL prompts. 4. Follow the HFL prompts.
2013 Fit
1System Setup Press the button before a command.
Once a passcode is set, you are required to enter the passcode with every new key cycle to use HFL. If you forget the code, go to your dealer to have the passcode reset. You can also cancel the passcode by clearing all the data stored in the HFL system.
2 To clear the system P. 151
The default setting of the incoming notification is a ring tone.
To select a ring tone or a prompt as the incoming call notification 1. Say "System Setup."
2. Say "Call Notification" after the prompts.
3. Say "Ring Tone" or "Prompt" after the prompts. For no audible notification, say "Off."
Index
Home
150
To activate or deactivate the auto transfer function The call on your cell phone can be automatically transferred to HFL when you get into the vehicle and turn on the ignition switch. 1. Say "System Setup."
2. Say "Auto Transfer" after the prompts. HFL lets you know the current status.
3. Follow the HFL prompts to change the setting.
uuBluetooth® HandsFreeLink®*uHFL Menus
2013 Fit
1System Setup Press the button before a command.
QRG
You can clear the system when you have forgotten the passcode and cannot access HFL. When HFL asks you for the passcode, say "System Clear."
To clear the system
Paired phones, all stored or imported phonebook data, and any passcodes are
erased.
1. Say "System Setup."
TOC
2. Say "Clear" after the prompts.
3. Follow the HFL prompts.
Features
Change Language
You can set the system language to French or English. 1. Say "Change Language."
2. Follow the HFL prompts.
1Change Language Press the button before a command.
If you have not named your paired phone in the selected language, HFL will ask you to name it in that language.
Index
Home
151
QRG
Index Home
152
2013 Fit
2013 Fit
QRG
Driving
This chapter discusses driving, refueling, and information on items such as accessories.
Before Driving Driving Preparation .......................... 154 Maximum Load Limit........................ 157
Towing a Trailer Towing Your Vehicle ........................ 159
When Driving Starting the Engine .......................... 161 Precautions While Driving................. 163 Automatic Transmission ................... 164
Models with 7 positions AT
Shifting ............................................ 165
Models with 5 positions AT
Shifting ............................................ 167
* Not available on all models
Manual transmission models
Shifting............................................ 171 Cruise Control* ............................... 173 VSA® (Vehicle Stability Assist), aka ESC
(Electronic Stability Control), System ...... 176 TPMS (Tire Pressure Monitoring System) .. 178 Tire Pressure Monitoring System (TPMS) -
Required Federal Explanation ......... 179 Braking
Brake System ................................... 181 ABS (Anti-lock Brake System) ........... 183 Brake Assist System.......................... 184
Parking Your Vehicle When Stopped ................................ 185
Refueling Fuel Information .............................. 186 How to Refuel ................................. 187
Fuel Economy.................................... 189 Improving Fuel Economy.................. 189
Accessories and Modifications Accessories ...................................... 190 Modifications................................... 190
Index
Home
153
Before Driving
QRG Driving Preparation
Check the following items before you start driving.
2013 Fit
Exterior Checks
1Exterior Checks
· Make sure there are no obstructions on the windows, door mirrors, exterior lights, or other parts of the vehicle. u Remove any frost, snow, or ice. u Remove any snow on the roof, as this can slip down and obstruct your field of vision while driving. If frozen solid, remove ice once it has softened. u When removing ice from around the wheels, be sure not to damage the wheel or wheel components.
· Make sure the hood is securely closed. u If the hood opens while driving, your front view will be blocked.
NOTICE When doors are frozen shut, use warm water around the door edges to melt any ice. Do not try to force them open, as this can damage the rubber trim around the doors. When done, wipe dry to avoid further freezing.
Do not pour warm water into the key cylinder. You will be unable to insert key if the water freezes in the hole.
Driving
TOC · Make sure the tires are in good condition. u Check air pressure, check for damage and excessive wear.
2 Checking and Maintaining Tires P. 222
· Make sure there are no people or objects behind or around the vehicle. u There are blind spots from the inside.
Heat from the engine and exhaust can ignite flammable materials left under the hood, causing a fire. If you've parked your vehicle for an extended period, inspect and remove any debris that may have collected, such as dried grass and leaves that have fallen or have been carried in for use as a nest by a small animal. Also check under the hood for leftover flammable materials after you or someone else has performed maintenance on your vehicle.
Index
Home
154
uuBefore DrivinguDriving Preparation
Interior Checks
· Store or secure all items on board properly. u Carrying too much cargo, or improperly storing it, can affect your vehicle's handling, stability, stopping distance, and tires, and make it unsafe.
2 Maximum Load Limit P. 157
2013 Fit
1Interior Checks The headlight aim is set by the factory, and does not need to be adjusted. However, if you regularly carry heavy items in the cargo area, have the aiming readjusted at a dealer or by a qualified technician.
QRG
· Do not pile items higher than the seat height. u They can block your view and may be thrown forward in the event of sudden braking.
· Do not place anything in the front seat footwells. Make sure to secure the floor
mat *.
u An object or unsecured floor mat can interfere with your brake and accelerator
pedal operation while driving.
· If you have any animals on board, do not let them move around in the vehicle.
TOC
u They may interfere with driving and a crash could occur.
Driving
· Securely close and lock all doors and the tailgate.
2 Locking/Unlocking the Doors from the Inside P. 82
· Adjust your seating position properly. u Adjust the head restraint, too.
2 Adjusting the Seats P. 103 2 Adjusting the Head Restraints P. 105
· Adjust the mirrors and steering wheel properly for your driving. u Adjust them while sitting in the proper driving position.
2 Adjusting the Mirrors P. 102 2 Adjusting the Steering Wheel P. 101
Index
* Not available on all models
Continued
Home
155
Driving
uuBefore DrivinguDriving Preparation
QRG · Be sure items placed on the floor behind the front seats cannot roll under the seats. u They can interfere with the driver's ability to operate the pedals, the operation of the seats, or the operation of the sensors under the seats. · Everyone in the vehicle must fasten their seat belt. 2 Fastening a Seat Belt P. 29 · Make sure that the indicators in the instrument panel come on when you start the vehicle, and go off soon after. u Always have a dealer check the vehicle if a problem is indicated. 2 Indicators P. 64
TOC
Index Home
156
2013 Fit
Maximum Load Limit
The maximum load for your vehicle is 850 lbs (385 kg). See Tire and Loading Information label attached to the driver's doorjamb.
Label Example
uuBefore DrivinguMaximum Load Limit
1Maximum Load Limit
2013 Fit
QRG
3 WARNING
Overloading or improper loading can affect handling and stability and cause a crash in which you can be hurt or killed.
Follow all load limits and other loading guidelines in this manual.
This figure includes the total weight of all occupants, cargo, and accessories, and the tongue load if you are towing a trailer.
Steps for Determining Correct Load Limit (1) Locate the statement "The combined weight of occupants and cargo
never exceed XXX kg or XXX lbs." on your vehicle's placard.
(2) Determine the combined weight of the driver and passengers that will be riding in your vehicle.
(3) Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs.
(4) The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the "XXX" amount equals 1,400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1,400 - 750 (5 x 150) = 650 lbs.)
Gross Vehicle Weight Rating (GVWR): The maximum allowable weight of the vehicle, all occupants, all accessories, all cargo, and the tongue load.
2 Specifications P. 268
Gross Axle Weight Rating (GAWR): The maximum allowable weight of the vehicle axle.
2 Specifications P. 268
Continued
Driving
TOC
Index Home
157
uuBefore DrivinguMaximum Load Limit
QRG (5) Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in step 4.
(6) If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.
In addition, the total weight of the vehicle, all occupants, accessories, cargo, and trailer tongue load must not exceed the Gross Vehicle Weight Rating (GVW R) or the Gross Axle Weight Rating (GAWR). Both are on a label on the driver's doorjamb.
Load Limits Example TOC
Example1
Driving
Example2
Max Load 850 lbs (385 kg)
Passenger Weight 150 lbs x 2 = 300 lbs (68 kg x 2 = 136 kg)
Cargo Weight 550 lbs (249 kg)
Index
Home
158
Max Load 850 lbs (385 kg)
Passenger Weight 150 lbs x 5 = 750 lbs (68 kg x 5 = 340 kg)
Cargo Weight 100 lbs (45 kg)
2013 Fit
Towing a Trailer
Your vehicle is not designed to tow a trailer. Attempting to do so can void your warranties.
Towing Your Vehicle
Your vehicle can be towed behind a motorhome.
When Your Vehicle is Towed Behind a Motorhome
Perform the following procedure before towing your vehicle.
Automatic transmission models
1. Check the transmission fluid level. u Make sure the fluid level is between the upper and lower marks.
2. Start the engine. 3. Depress the brake pedal. Move the shift lever through all its positions. 4. Shift to (D and hold for five seconds, then to (N. Let the engine run for three
minutes, then turn it off. 5. Release the parking brake. 6. Leave the ignition switch in ACCESSORY (q.
u Make sure the steering wheel does not lock. 7. Turn off all the electric devices. Do not use any accessory power sockets.
u This can prevent the battery from running down.
Manual transmission models
1. Shift to (N. 2. Release the parking brake. 3. Turn the ignition switch to ACCESSORY (q.
u Make sure the steering wheel does not lock. 4. Turn off all the electric devices. Do not use any accessory power sockets.
u This can prevent the battery from running down.
2013 Fit
1Towing Your Vehicle
NOTICE Automatic transmission models Failure to follow the recommended instructions exactly will result in severe automatic transmission damage. If you cannot shift the transmission or start the engine, your vehicle must be transported on a flat-bed truck or trailer.
QRG
Do not exceed 65 mph (100 km/h).
Consult your towing parts sales or rental agency if any other items are recommended or required for your towing situation.
Automatic transmission models
If you tow your vehicle behind a motorhome, the transmission fluid must be changed every 2 years or 30,000 miles (48,000 km), whichever comes first.
TOC
Driving
1When Your Vehicle is Towed Behind a Motorhome
NOTICE Automatic transmission models Severe transmission damage will occur if the vehicle is shifted from (R to (N and then towed with the drive wheels on the ground.
Index
Home
Continued
159
uuTowing a TraileruTowing Your Vehicle
QRG
Extended Towing
If you tow more than 8 hours in one day, you should repeat the "before towing your
vehicle procedure" at least every 8 hours.
You also need to perform the following procedure to prevent the battery from
running down.
Interior Fuse Box
1. Remove the 30 A accessory radio fuse. This fuse is located in the interior fuse box.
2 Interior Fuse Box P. 261
2. Store the fuse in a safe place so you do not lose it. u Make sure to reinstall the fuse before you start driving your vehicle.
TOC
Driving
Index
Home
160
Radio Fuse
2013 Fit
When Driving
Starting the Engine
Brake Pedal
Clutch Pedal Brake Pedal
* Not available on all models
1. Make sure the parking brake is applied.
2013 Fit
1Starting the Engine Keep your foot firmly on the brake pedal when starting the engine.
QRG
The engine is harder to start in cold weather and in thinner air found at altitudes above 8,000 feet (2,400 meters).
When starting the engine in cold weather, turn off all
electrical accessories such as the lights, heating and
Automatic transmission models
cooling* system, and rear defogger in order to reduce
2. Check that the shift lever is in (P, then
battery drain.
depress the brake pedal.
u Although it is possible to start the vehicle
If you live in a region where winter is extremely cold, an engine block heater will improve starting and
in (N, it is safer to start it in (P.
warming of the engine. If temperatures consistently
TOC
below -22°F (-30°C) are expected, the coolant
mixture should be changed to a higher concentration
to prevent freezing. Consult a dealer for details.
Driving
Manual transmission models
2. Check that the shift lever is in (N. Then depress the brake pedal with your right foot, and the clutch pedal with your left foot. u The clutch pedal must be fully depressed to start the engine.
If the exhaust system sounds abnormal or you can smell exhaust gas inside the vehicle, have your vehicle checked by a dealer. There may be a problem with the engine or exhaust system.
Index
Continued
Home
161
Driving
QRG TOC
uuWhen DrivinguStarting the Engine
2013 Fit
3. Turn the ignition switch to START (e without depressing the accelerator pedal.
1Starting the Engine
Do not hold the key in START (e for more than 15 seconds.
· If the engine does not start right away, wait for at
least 10 seconds before trying again.
· If the engine starts, but then immediately stops,
wait at least 10 seconds before repeating step 3 while gently depressing the accelerator pedal. Release the accelerator pedal once the engine starts.
Starting to Drive
Automatic transmission models
1. Keeping your right foot on the brake pedal, release the parking brake. Check that the brake system indicator has gone off.
2 Parking Brake P. 181
2. Put the shift lever in (D. Select (R when reversing.
3. Gradually release the brake pedal and gently depress the accelerator pedal to pull away.
The immobilizer system protects your vehicle from theft. If an improperly coded device is used, the engine's fuel system is disabled.
2 Immobilizer System P. 90
Index
Home
162
uuWhen DrivinguPrecautions While Driving
Precautions While Driving
In Rain
Avoid driving in deep water and on flooded roads. This can damage the engine, driveline, or cause electrical component failure.
2013 Fit
1Precautions While Driving NOTICE Do not operate the shift lever while pressing the accelerator pedal. You could damage the transmission.
QRG
Other Precautions
If there is a strong impact with something under the vehicle, stop in a safe location. Check the underside of the vehicle for damage or any fluid leaks.
If the ignition switch is turned to ACCESSORY (q or LOCK (0 while driving, the engine will shut down and all steering and brake power assist functions will stop, making it difficult to control the vehicle.
Do not put the shift lever in (N, as you will lose engine braking (and acceleration) performance.
During the first 600 miles (1,000 km) of operation,
avoid sudden acceleration or full throttle operation so
as to not damage the engine or powertrain.
TOC
Driving
Avoid hard braking for the first 200 miles (300 km). You should also follow this when the brake pads are replaced.
NOTICE
Sport Models
The following can damage the under spoiler:
· Parking the vehicle by a parking block · Parallel parking along the road shoulder · Driving towards the bottom of a hill · Driving up or down to a different surface level
(such as a road shoulder)
· Driving on a rutted or bumpy road · Driving on a road with potholes.
Index
Home
163
Driving
uuWhen DrivinguAutomatic Transmission
QRG Automatic Transmission Creeping
The engine may run at a higher idle speed and creeping increases: · Immediately after the engine starts. · When the heating and cooling system is in use. Keep the brake pedal firmly depressed when stopped.
Kickdown
Quickly depressing the accelerator pedal while driving uphill may cause the transmission to drop to a lower gear, unexpectedly increasing vehicle speed. Depress the accelerator pedal carefully, especially on slippery roads and curves. TOC
Index Home
164
2013 Fit
Shifting
Change the shift position in accordance with your driving needs.
Models with 7 positions AT
Shift lever positions
Release Button
Park Used when parking or starting the engine
Reverse Used when reversing
Neutral Used when idling
Drive Used for normal driving (gears change between 1st and 5th automatically)
Drive (D3) Used when: Going up or down hills
Second Used to increase engine braking (the transmission is locked in 2nd gear)
First Used to further increase engine braking (the transmission is locked in 1st gear)
uuWhen DrivinguShifting
2013 Fit
1Shifting You cannot turn the ignition switch to LOCK (0 and remove the key unless the shift lever is in (P.
QRG
The vehicle may move forward very slightly even in (N while the engine is cold. Depress the brake pedal firmly and, when necessary, apply the parking brake.
TOC
Driving
Index
Continued
Home
165
Driving
uuWhen DrivinguShifting QRG
Shift Lever Operation
TOC
Index Home
166
2013 Fit
Tachometer's red zone Shift Lever Position Indicator
Depress the brake pedal and press the shift lever release button to shift. Shift without pressing the shift lever release button. Press the shift lever release button and shift.
1Shift Lever Operation
NOTICE When you change the shift lever from (D to (R and vice versa, come to a complete stop and keep the brake pedal depressed. Operating the shift lever before the vehicle has come to a complete standstill can damage the transmission.
Use the shift lever position indicator to check the lever position before pulling away.
Whichever position the shift lever is in when driving, a blinking (D indicator indicates a transmission problem. Avoid sudden acceleration and have the transmission checked by a dealer as soon as possible.
The fuel supply may be cut off if you drive at engine speeds in or over the tachometer red zone (engine speed limit). If this happens, you may experience a slight jolt.
It may not be possible to operate the shift lever if the brake pedal is applied while the shift lever release button is held down. Depress the brake pedal first.
Shifting
Change the shift position in accordance with your driving needs
Models with 5 positions AT
Shift lever positions
Release Button
Park Used when parking or starting the engine Reverse Used when reversing
Neutral Used when idling
uuWhen DrivinguShifting
2013 Fit
1Shifting You cannot turn the ignition switch to LOCK (0 and remove the key unless the shift lever is in (P.
QRG
The vehicle may move forward very slightly even in (N while the engine is cold.
Depress the brake pedal firmly and, when necessary, apply the parking brake.
TOC
Driving
Drive Used: For normal driving (gears change
between 1st and 5th automatically) When temporarily driving in the
sequential mode
Drive (S) Used for: Automatically changing gears
between 1st and 4th (4th gear is used only at high speed) Driving in the sequential mode
Continued
Index
Home
167
Driving
uuWhen DrivinguShifting QRG
Shift Lever Operation
TOC
Index Home
168
2013 Fit
Tachometer's red zone Shift Lever Position Indicator
M (Sequential Shift Mode) Indicator/ Gear position Indicator
Depress the brake pedal and press the shift lever release button to shift. Shift without pressing the shift lever release button.
Press the shift lever release button and shift.
1Shift Lever Operation
NOTICE When you change the shift lever from (D to (R and vice versa, come to a complete stop and keep the brake pedal depressed. Operating the shift lever before the vehicle has come to a complete standstill can damage the transmission.
Use the shift lever position indicator to check the lever position before pulling away.
Whichever position the shift lever is in when driving, a blinking (D indicator indicates a transmission problem. Avoid sudden acceleration and have the transmission checked by a dealer as soon as possible.
The fuel supply may be cut off if you drive at engine speeds in or over the tachometer red zone (engine speed limit). If this happens, you may experience a slight jolt.
It may not be possible to operate the shift lever if the brake pedal is applied while the shift lever release button is pressed. Depress the brake pedal first.
Sequential Shift Mode
Use the paddle shifters to change between 1st and 5th gears without removing your hands from the steering wheel. The transmission will switch to the sequential shift mode.
When the shift lever is in (D: The vehicle will go into the sequential shift mode momentarily, and the gear position indicator will come on. Once you start traveling at a constant speed, the sequential shift mode will automatically switch off, and the gear position indicator will go off.
Hold the (+ paddle shifter for two seconds to return to normal drive.
When the shift lever is in (S: The vehicle will go into the sequential shift mode, and the M (sequential shift) indicator and gear position indicator will come on. At speeds of 6 mph (10 km/h) or less, the vehicle automatically shifts down into 1st gear. It will not automatically shift up, even if vehicle speed increases.
You can only pull away in 1st or 2nd gear.
When switching out of the sequential shift mode, move the shift lever from (S to (D. When the sequential shift mode is canceled, the M indicator and shift indicator go off.
Continued
uuWhen DrivinguShifting
2013 Fit
QRG
TOC
Index Home
169
Driving
uuWhen DrivinguShifting
QRG
Second gear lock mode If you pull the (+ paddle shifter while stopped or driving at 6 mph (10 km/h) or less, the gear position will be locked in 2nd gear. This makes it easier to pull away on slippery surfaces such as snow covered roads.
2013 Fit
To cancel the 2nd gear lock mode, pull the (- paddle shifter, or move the shift lever from (S to (D.
Sequential Shift Mode Operation
(- Paddle Shifter (Shift down)
TOC
Driving
Index
Home
170
Downshifting when pulling the (- paddle shifter (Changes to a higher gear)
(+ Paddle Shifter (Shift up)
Upshifting when pulling the (+ paddle shifter (Changes to a higher gear)
1Sequential Shift Mode Operation
Each paddle shift operation makes a single gear change. To change gears continuously, release the paddle shifter before pulling it again for the next gear.
Recommended Shift Points Use this table as a guideline for efficient fuel economy and effective emission control.
Shift Up 1st to 2nd 2nd to 3rd 3rd to 4th 4th to 5th
Normal Acceleration 15 mph (24 km/h) 25 mph (40 km/h) 40 mph (64 km/h) 47 mph (76 km/h)
If the gear position indicator blinks when you try to shift up or down, this means your vehicle speed is not in its allowable gear shifting range. Slightly accelerate to shift up and decelerate to shift down while the indicator is blinking.
uuWhen DrivinguShifting
Manual transmission models
Shifting
Shift Lever Operation
Fully depress the clutch pedal to operate the shift lever and change gears, then slowly release the pedal.
Depress the clutch pedal, and pause for a few seconds before shifting into (R, or shift into one of the forward gears for a moment. This stops the gears so they do not "grind."
2013 Fit
1Shifting
NOTICE Do not shift to (R before the vehicle comes to a complete stop. Shifting to (R before stopping can damage the transmission.
NOTICE Before downshifting, make sure the engine will not go into the tachometer's red zone. Should this occur, it can severely damage your engine.
QRG
TOC
Driving
Continued
Index
Home
171
uuWhen DrivinguShifting QRG
TOC
2013 Fit
When you are not shifting, do not rest your foot on the clutch pedal. This can cause your clutch to wear out faster.
1Shifting
Recommended Shift Points
Driving in the highest gear that allows the engine to run and accelerate smoothly helps to optimize fuel economy and effective emissions control. The following shift points are recommended:
Shift Up 1st to 2nd 2nd to 3rd 3rd to 4th 4th to 5th
Normal Acceleration 15 mph (24 km/h) 27 mph (44 km/h) 39 mph (63 km/h) 53 mph (85 km/h)
If you exceed the maximum speed for the gear you are in, the engine speed will enter into the tachometer's red zone. When this happens, you may experience a slight jolt.
Driving
Index
Home
172
uuWhen DrivinguCruise Control*
Cruise Control*
Maintains a constant vehicle speed without having to keep your foot on the accelerator. Use cruise control on freeways or open roads where you can travel at a constant speed with little acceleration or deceleration.
When to use
Vehicle speed for cruise control:
Desired speed in a range above roughly 25 mph (40 km/h) ~
Automatic transmission models
Shift positions for cruise control:
In (D, (d * or (S *
Always keep sufficient distance between you and the vehicle in front of you.
2013 Fit
1Cruise Control*
3 WARNING
Improper use of the cruise control can lead to a crash.
Use the cruise control only when traveling on open highways in good weather.
It may not be possible to maintain a constant speed when driving uphill or downhill.
QRG
How to use
Press the CRUISE button on
the steering wheel.
CRUISE MAIN is on in the instrument panel.
Cruise control is ready to use.
When not using cruise control: Turn off cruise control by pressing the CRUISE button.
TOC
Driving
* Not available on all models
Continued
Index
Home
173
uuWhen DrivinguCruise Control* QRG
To Set the Vehicle Speed
On
DECEL/SET Button
On On when cruise control begins
Press and release
Take your foot off the pedal and press the DECEL/SET button when you reach the TOC desired speed.
The moment you release the DECEL/SET button, the set speed is fixed, and cruise control begins. The CRUISE CONTROL indicator comes on.
Driving
Index
Home
174 * Not available on all models
2013 Fit
uuWhen DrivinguCruise Control*
2013 Fit
QRG
To Adjust the Vehicle Speed
Increase or decrease the vehicle speed using the RES/ACCEL or DECEL/SET buttons on the steering wheel.
1To Adjust the Vehicle Speed
You can set the vehicle speed using the DECEL/SET button on the steering wheel when adjusting the speed with the accelerator and brake pedals.
To increase speed
To decrease speed
· Each time you press the button, the vehicle speed is increased or decreased by about 1 mph (1.6 km/h).
· If you keep the button pressed, the vehicle speed increases or decreases until you release it. This speed is then set.
To Cancel
CANCEL Button
CRUISE Button
* Not available on all models
To cancel cruise control, do any of the following: · Press the CANCEL button. · Press the CRUISE button. · Depress the brake pedal. · Depress the clutch pedal. The CRUISE CONTROL indicator goes off.
1To Cancel Resuming the prior set speed: After cruise control has been canceled, you can still resume the prior set speed by pressing the RES/ ACCEL button while driving at a speed of at least 25 mph (40 km/h) or more.
You cannot set or resume in the following situations:
· When vehicle speed is less than 25 mph (40 km/h) · When the CRUISE button is turned off
At vehicle speeds of 22 mph (35 km/h) or less, cruise control is canceled automatically.
Driving
TOC
Index Home
175
Driving
QRG TOC
uuWhen DrivinguVSA® (Vehicle Stability Assist), aka ESC (Electronic Stability Control), System
VSA® (Vehicle Stability Assist), aka ESC (Electronic Stability Control), System
VSA® helps to stabilize the vehicle during cornering if the vehicle turns more or less than what was intended. It also assists in maintaining traction on slippery surfaces. It does so by regulating engine output and selectively applying the brakes.
2013 Fit
1VSA® (Vehicle Stability Assist), aka ESC (Electronic Stability Control), System The VSA® may not function properly if tire type and size are mixed. Make sure to use the same size and type of tire, and the air pressures as specified.
VSA® Operation
VSA® System Indicator
When VSA® activates, you may notice that the engine does not respond to the accelerator. You may also notice some noise from the hydraulic system. You will also see the indicator blink.
When the VSA® indicator comes on and stays on while driving, there may be a problem with the system. While this may not interfere with normal driving, have your vehicle checked by a dealer immediately.
VSA® cannot enhance stability in all driving situations and does not control the entire braking system. You still need to drive and corner at speeds appropriate for the conditions and always leave a sufficient margin of safety.
The main function of the VSA® system is generally known as Electronic Stability Control (ESC). The system also includes a traction control function.
Index
Home
176
uuWhen DrivinguVSA® (Vehicle Stability Assist), aka ESC (Electronic Stability Control), System
VSA® On and Off
VSA® OFF Indicator
This button is on the driver side control panel. To turn the VSA® system on and off, press and hold it until you hear a beep.
2013 Fit
1VSA® (Vehicle Stability Assist), aka ESC (Electronic Stability Control), System Without VSA®, your vehicle will have normal braking and cornering ability, but it will not have VSA® traction and stability enhancement.
QRG
VSA® will stop and the indicator will come on.
In certain unusual conditions when your vehicle gets stuck in shallow mud or fresh snow, it may be easier
To turn it on again, press the (VSA® OFF)
to free it with the VSA® temporarily switched off.
button until you hear a beep.
When the VSA® system is off, the traction control
VSA® is turned on every time you start the engine, even if you turned it off the last time
system is also off. You should only attempt to free your vehicle with the VSA® off if you are not able to free it when the VSA® is on.
you drove the vehicle.
Immediately after freeing your vehicle, be sure to
TOC
switch VSA® on again. We do not recommend driving
your vehicle with the VSA® and traction control
systems switched off.
Driving
If the low tire pressure* or TPMS indicator* comes on or blinks, the VSA® system comes on automatically. In this case, you cannot turn the system off by pressing
the button.
You may hear a motor sound coming from the engine compartment while system checks are being performed immediately after starting the engine or while driving. This is normal.
Index
Home
177
QRG
uuWhen DrivinguTPMS (Tire Pressure Monitoring System)
U.S. models only
TPMS (Tire Pressure Monitoring System)
Monitors the tire pressure while you are driving. If your vehicle's tire pressure becomes significantly low, the low tire pressure indicator comes on.
2013 Fit
1TPMS (Tire Pressure Monitoring System) Conditions such as low ambient temperature and altitude change directly affect tire pressure and can trigger the low tire pressure indicator to come on. 2 If the Low Tire Pressure Indicator Comes On P. 259
Tire pressure checked and inflated in:
· Warm weather can become under-inflated in
colder weather.
· Cold weather can become over-inflated in warmer
weather. The low tire pressure indicator will not come on as a result of over inflation.
TOC
Driving
Index
Home
178
uuWhen DrivinguTire Pressure Monitoring System (TPMS) - Required Federal Explanation
U.S. models
Tire Pressure Monitoring System (TPMS) - Required Federal Explanation
2013 Fit
QRG
Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.)
As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly
under-inflated.
TOC
Driving
Accordingly, when the low tire pressure tell tale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure.
Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability.
Continued
Index
Home
179
Driving
uuWhen DrivinguTire Pressure Monitoring System (TPMS) - Required Federal Explanation
QRG Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver 's responsibility to maintain correct tire pressure, even if underinflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.
Your vehicle has also been eq uipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is provided by a separate telltale, which displays the symbol"TPMS" when illuminated.
When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended.
TOC TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly.
Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly.
Index
Home
180
2013 Fit
Braking
Brake System
Parking Brake
Use the parking brake to keep the vehicle stationary when parking. To apply: Pull the lever fully up without pressing the release button.
2013 Fit
1Parking Brake NOTICE Release the parking brake fully before driving. The rear brakes and axle can be damaged if you drive with the parking brake applied.
QRG
If you start driving without fully releasing the parking brake, a buzzer sounds as a warning.
Always apply the parking brake when parking.
To release:
1. Pull the lever slightly, and press and hold
the release button.
TOC
2. Lower the lever down all the way, then release the button.
Driving
Continued
Index
Home
181
Driving
QRG TOC
uuBrakinguBrake System
2013 Fit
Foot Brake
Your vehicle is equipped with front disc brakes. The brakes on the rear wheels may be disc or drum, depending on the model. A vacuum power assist helps reduce the effort needed on the brake pedal. The brake assist system increases the stopping force when you depress the brake pedal hard in an emergency situation. The antilock brake system (ABS) helps you retain steering control when braking very hard.
2 Brake Assist System P. 184 2 ABS (Anti-lock Brake System) P. 183
1Foot Brake Check the brakes after driving through deep water, or if there is a buildup of road surface water. If necessary, dry the brakes by lightly depressing the pedal several times.
If you hear a continuous metallic friction sound when applying the brakes, the brake pads need to be replaced. Have the vehicle checked by a dealer.
Constantly using the brake pedal while going down a long hill builds up heat, which reduces the brake effectiveness. Apply engine braking by taking your foot off the accelerator pedal and downshifting to a lower gear. With manual transmission use a lower gear for greater engine braking.
Do not rest your foot on the brake pedal while driving, as it will lightly apply the brakes and cause them to lose effectiveness over time and reduce pad life. It will also confuse drivers behind you.
Index
Home
182
uuBrakinguABS (Anti-lock Brake System)
ABS (Anti-lock Brake System)
ABS
Helps prevent the wheels from locking up, and helps you retain steering control by pumping the brakes rapidly, much faster than you.
The electronic brake distribution (EBD) system, which is part of the ABS, also balances the front-to-rear braking distribution according to vehicle loading.
You should never pump the brake pedal. Let the ABS work for you by always keeping firm, steady pressure on the brake pedal. This is sometimes referred to as "stomp and steer."
ABS operation The brake pedal may pulsate slightly when the ABS is working. Keep holding the pedal firmly down. On dry pavement, you will need to press on the brake pedal very hard before the ABS activates. However, you may feel the ABS activate immediately if you are trying to stop on snow or ice.
When the vehicle speed goes under 6 mph (10 km/h), the ABS stops.
2013 Fit
1ABS (Anti-lock Brake System)
NOTICE The ABS may not function correctly if you use an incorrect tire type and size.
When the ABS indicator comes on while driving, there may be a problem with the system. While normal braking is not affected, there is a possibility of the ABS not operating. Have the vehicle checked by a dealer immediately.
The ABS does not reduce the time or distance it takes to stop the vehicle. It only helps with steering control during hard braking.
In the following cases, your vehicle may need more stopping distance than a vehicle without the ABS:
· When driving on rough road surfaces, including
when driving on uneven surfaces, such as gravel or snow.
· When tire chains are installed.
Driving
QRG TOC
You may hear a motor sound coming from the engine compartment while system checks are being performed immediately after starting the engine or while driving. This is normal.
Index
Home
183
Driving
uuBrakinguBrake Assist System
QRG Brake Assist System Brake Assist System
Designed to assist the driver by generating greater braking force when you depress the brake pedal hard during emergency braking. Brake assist system operation Press the brake pedal firmly for more powerful braking. When brake assist operates, the pedal may wiggle slightly and an operating noise may be heard. This is normal. Keep holding the brake pedal firmly down.
TOC
Index Home
184
2013 Fit
Parking Your Vehicle
When Stopped
1. Depress the brake pedal firmly. 2. Firmly apply the parking brake.
Automatic transmission models
3. Move the shift lever from (D to (P.
Manual transmission models
3. Move the shift lever to (R. 4. Turn off the engine.
Always set the parking brake firmly, in particular if you are parked on an incline.
2013 Fit
1Parking Your Vehicle Do not park your vehicle near flammable objects, such as dry grass, oil, or timber. Heat from the exhaust can cause a fire.
QRG
1When Stopped
NOTICE
Automatic transmission models
The following can damage the transmission:
· Depressing the accelerator and brake pedals
simultaneously.
· Holding the vehicle in place when facing uphill by
depressing the accelerator pedal.
· Moving the shift lever into (P before the vehicle
stops completely.
TOC
Raise the wiper arms when snow is expected.
Driving
Index
Home
185
Driving
QRG TOC
Refueling
Fuel Information
Fuel recommendation Unleaded gasoline, pump octane number 87 or higher
Use of lower octane gasoline can cause a persistent, heavy metallic knocking noise that can lead to engine damage.
Top tier detergent gasoline Because the level of detergency and additives in gasoline vary in the market, Honda endorses the use of "TOP TIER Detergent Gasoline" where available to help maintain the performance and reliability of your vehicle. TOP TIER Detergent Gasoline meets a new gasoline standard jointly established by leading automotive manufacturers to meet the needs of today's advanced engines.
Qualifying gasoline retailers will, in most cases, identify their gasoline as having met "TOP TIER Detergent Gasoline" standards at the retail location. This fuel is guaranteed to contain the proper level of detergent additives and be free of metallic additives. The proper level of detergent additives, and absence of harmful metallic additives in gasoline, help avoid build-up of deposits in your engine and emission control system.
2013 Fit
1Fuel Information
NOTICE We recommend quality gasoline containing detergent additives that help prevent fuel system and engine deposits. In addition, in order to maintain good performance, fuel economy, and emissions control, we strongly recommend the use of gasoline that does NOT contain harmful manganese-based fuel additives such as MMT, if such gasoline is available.
Use of gasoline with these additives may adversely affect performance, and cause the malfunction indicator lamp on your instrument panel to come on. If this happens, contact a dealer for service.
For further important fuel-related information for your vehicle, or on information on gasoline that does not contain MMT, visit www.hondacars.com. In Canada, visit www.honda.ca for additional information on gasoline. For more information on top tier gasoline, visit www.toptiergas.com.
Index
Home
186
Gasoline containing ethanol Some gasoline today is blended with oxygenates such as ethanol. Your vehicle is designed to operate on oxygenated gasoline containing up to 10% ethanol by volume. Do not use gasoline containing methanol. If you notice any undesirable operating symptoms, try another service station or switch to another brand of gasoline.
Fuel tank capacity: 10.6 US gal (40 liters)
uuRefuelinguHow to Refuel
2013 Fit
QRG
How to Refuel
1How to Refuel
Push
1. Stop your vehicle with the service station
3 WARNING
pump on the left side of the vehicle in the
rear.
Gasoline is highly flammable and explosive.
You can be burned or seriously injured
TOC
2. Turn off the engine.
when handling fuel.
Driving
Pull out
Fuel Fill Door
3. Press the area indicated by the arrow to release the fuel fill door. You will hear a click.
· Stop the engine, and keep heat, sparks, and flame away.
· Handle fuel only outdoors. · Wipe up spills immediately.
Continued
Index
Home
187
Driving
QRG TOC
uuRefuelinguHow to Refuel Cap
Cap Holder
2013 Fit
4. Remove the fuel fill cap slowly. If you hear a release of air, wait until this stops, then turn the knob slowly to open the fuel fill cap.
1How to Refuel
The filler nozzle automatically stops to leave space in the fuel tank so that fuel does not overflow as a result of changes in air temperature.
5. Place the fuel fill cap in the holder.
6. Insert the filler nozzle fully. u When the tank is full, the fuel nozzle will click off automatically. This leaves space in the fuel tank in case the fuel expands with a change in the temperature.
If the filler nozzle keeps turning off when the tank is not full, there may be a problem with the pump's fuel vapor recovery system. Try filling at another pump. If this does not fix the problem, consult a dealer.
Do not continue to add fuel after the nozzle has automatically stopped. Additional fuel can exceed the full tank capacity.
7. After filling, replace the fuel fill cap, tightening it until you hear it click at least once. u Shut the fuel fill door by hand.
Index
Home
188
Fuel Economy
Improving Fuel Economy
2013 Fit
QRG
Fuel economy depends on several conditions, including driving conditions, your
1Improving Fuel Economy
driving habits, the condition of your vehicle, and loading. Depending on these and other conditions, you may or may not achieve the rated fuel economy of this vehicle.
Direct calculation is the recommended method to determine actual fuel consumed while driving.
Maintenance and Fuel Economy
You can optimize your fuel economy with proper maintenance of your vehicle. Always maintain your vehicle in accordance with the messages displayed on the information display.
· Use the recommended viscosity engine oil, displaying the API Certification Seal.
· Maintain the specified tire pressure.
Miles driven 100
Gallons of fuel
Liter
Miles per Gallon
Kilometers
L per 100 km
In Canada, posted fuel economy numbers are established following a simulated test. For more information on how this test is performed, please visit http://oee.nrcan.gc.ca/
· Do not load the vehicle with excess cargo.
· Keep your vehicle clean. A buildup of snow or mud on your vehicle's underside
TOC
adds weight and increases wind resistance.
Driving
Index
Home
189
Accessories and Modifications
QRG Accessories
When installing accessories, check the following:
1Accessories and Modifications
2013 Fit
· Do not install accessories on the windshield. They can obstruct your view and delay your reaction to driving conditions.
· Do not install accessories on the side pillars or across the side windows. Accessories installed in these areas may interfere with proper operation of the side curtain airbags.
3 WARNING
Improper accessories or modifications can affect your vehicle's handling, stability, and performance, and cause a crash in which you can be seriously hurt or killed.
· Be sure electronic accessories do not overload electrical circuits or interfere with proper operation of your vehicle.
2 Fuses P. 260
· Before installing any electronic accessory, have the installer contact a dealer for assistance. If possible, have a dealer inspect the final installation.
TOC
Modifications
Follow all instructions in this owner's manual regarding accessories and modifications.
Honda Genuine accessories are recommended to ensure proper operation on your vehicle.
Driving
Do not modify your vehicle or use non-Honda components that can affect its handling, stability, and reliability.
Overall vehicle performance can be affected. Always make sure all equipment is properly installed and maintained, and that it meets federal, state, province, territory, and local regulations.
Index
Home
190
2013 Fit
QRG
Maintenance
This chapter discusses basic maintenance.
Before Performing Maintenance Inspection and Maintenance ............ 192 Safety When Performing Maintenance .... 193 Parts and Fluids Used in Maintenance Service ........................................... 194
Maintenance MinderTM ..................... 195 Maintenance Under the Hood
Maintenance Items Under the Hood..... 199 Opening the Hood ........................... 200 Recommended Engine Oil ................ 201 Oil Check ......................................... 202 Adding Engine Oil ............................ 203 Changing the Engine Oil and Oil Filter..... 204
* Not available on all models
Engine Coolant ................................ 206 Transmission Fluid............................ 208 Brake/Clutch Fluid............................ 210 Refilling Window Washer Fluid......... 211 Replacing Light Bulbs ....................... 212 Checking and Maintaining Wiper Blades .......................................... 218 Checking and Maintaining Tires Checking Tires ................................. 222 Tire and Loading Information Label .. 223 Tire Labeling .................................... 223 DOT Tire Quality Grading (U.S. Vehicles).. 225 Wear Indicators................................ 227
Tire Service Life................................ 227 Tire and Wheel Replacement ........... 228 Tire Rotation.................................... 229 Winter Tires ..................................... 230 Battery............................................... 231 Remote Transmitter Care* Replacing the Battery....................... 232 Heating and Cooling* System Maintenance ................................... 233 Cleaning
Interior Care .................................... 234 Exterior Care.................................... 235
Index
Home
191
Maintenance
QRG
TOC Index
Before Performing Maintenance
Inspection and Maintenance
2013 Fit
For your safety, perform all listed inspections and maintenance to keep your vehicle in good condition. If you become aware of any abnormality (noise, smell, insufficient brake fluid, oil residue on the ground, etc.), have your vehicle inspected by a dealer. (Note, however, that service at a dealer is not mandatory to keep your warranties in effect.) Refer to the separate maintenance booklet for detailed maintenance and inspection information.
1Inspection and Maintenance
U.S. models
Maintenance, replacement, or repair of emissions control devices and systems may be done by any automotive repair establishment or individuals using parts that are "certified" to EPA standards.
Types of Inspection and Maintenance
Daily inspections Perform inspections before long distance trips, when washing the vehicle, or when refueling.
Periodic inspections · Check the automatic transmission fluid level monthly.
2 Automatic Transmission Fluid P. 208
· Check the brake fluid level monthly.
2 Brake/Clutch Fluid P. 210
· Check the tire pressure monthly. Examine the tread for wear and foreign objects.
2 Checking and Maintaining Tires P. 222
· Check the operation of the exterior lights monthly.
2 Replacing Light Bulbs P. 212
According to state and federal regulations, failure to perform maintenance on the maintenance main items marked with # will not void your emissions warranties. However, all maintenance services should be performed in accordance with the intervals indicated by the information display.
2 Maintenance Service Items P. 197
If you want to perform complex maintenance tasks that require more skills and tools, you can purchase a subscription to the Service Express website at www.techinfo.honda.com.
2 Authorized Manuals P. 277
If you want to perform maintenance yourself, make sure that you have the necessary tools and skills first. After performing maintenance, update the records in the separate maintenance booklet.
· Check the condition of the wiper blades at least every six months.
2 Checking and Maintaining Wiper Blades P. 218
Home
192
uuBefore Performing MaintenanceuSafety When Performing Maintenance
Safety When Performing Maintenance
Some of the most important safety precautions are given here. However, we cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task.
Maintenance Safety
· To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames away from the battery and all fuel related parts.
· Never leave rags, towels, or other flammable objects under the hood. u Heat from the engine and exhaust can ignite them causing a fire.
· To clean parts, use a commercially available degreaser or parts cleaner, not gasoline.
· Wear eye protection and protective clothing when working with the battery or compressed air.
· Engine exhaust contains carbon monoxide, which is poisonous and can kill you. u Only operate the engine if there is sufficient ventilation.
Vehicle Safety
· The vehicle must be in a stationary condition. u Make sure your vehicle is parked on level ground, the parking brake is set, and the engine is off.
· Be aware that hot parts can burn you. u Make sure to let the engine and exhaust system cool thoroughly before touching vehicle parts.
· Be aware that moving parts can injure you. u Do not start the engine unless instructed, and keep your hands and limbs away from moving parts.
1Safety When Performing Maintenance
2013 Fit
QRG
3 WARNING
Improperly maintaining this vehicle or failing to correct a problem before driving can cause a crash in which you can be seriously hurt or killed.
Always follow the inspection and maintenance recommendations according to the schedules in this owner's manual.
3 WARNING
Failure to properly follow maintenance instructions and precautions can cause you to be seriously hurt or killed.
TOC Always follow the procedures and precautions in this owner's manual.
Maintenance
Index
Home
193
Maintenance
uuBefore Performing MaintenanceuParts and Fluids Used in Maintenance Service
QRG Parts and Fluids Used in Maintenance Service
The use of Honda genuine parts and fluids is recommended when maintaining and servicing your vehicle. Honda genuine parts are manufactured according to the same high quality standards used in Honda vehicles.
TOC
Index Home
194
2013 Fit
Maintenance MinderTM
If the engine oil life is less than 15%, you will see the Maintenance Minder messages appear on the information display every time you turn the ignition switch to ON (w. The messages notify you when to change the engine oil, or when to bring your vehicle to a dealer for indicated maintenance services.
2013 Fit
QRG
To Use Maintenance MinderTM
Displaying the Engine Oil Life
1. Turn the ignition switch to ON (w.
2. Press the (select/reset) knob repeatedly until the engine oil life appears on the information display.
The Maintenance Minder indicator ( ) stays on in the instrument panel after the engine oil life becomes 0%. Have the indicated maintenance done by a dealer immediately.
1Displaying the Engine Oil Life
Based on the engine operating conditions, the remaining engine oil life is calculated and displayed as a percentage.
Displayed Engine Oil Life (%) 100 90 80 70 60 50 40 30 20 15 10 5 0
Calculated Engine Oil Life (%) 100 to 91 90 to 81 80 to 71 70 to 61 60 to 51 50 to 41 40 to 31 30 to 21 20 to 16 15 to 11 10 to 6 5 to 1 0
Maintenance
TOC Index
Continued
Home
195
uuMaintenance MinderTMuTo Use Maintenance MinderTM
QRG
Maintenance Minder Messages on the Information Display
To switch the display, press the (select/reset) knob.
2013 Fit
Oil Life Display
Explanation
Information
Maintenance Minder Indicator
The engine oil life indicator starts to appear along with other due soon maintenance item codes when the remaining oil life becomes 15 percent.
The SERVICE message also starts to appear along with the engine oil life indicator and the maintenance item codes.
The engine oil is approaching the end of its service life.
The engine oil has almost reached the end of its service life, and the maintenance items should be inspected and serviced as soon as possible.
Starts to come on when the remaining engine oil life becomes 15 percent. It goes off when the display is switched.
The remaining engine oil life has The engine oil life has passed.
TOC
passed its service life, and a
The maintenance items must be
Maintenance
negative distance appears after inspected and serviced
driving over 10 miles (U.S. models) immediately. or 10 km (Canadian models). The negative distance on the display
Stays on as a reminder even when the display is switched.
blinks.
Index
Home
196
Maintenance Service Items
Maintenance Minder Indicator
Maintenance Minder Message Main Item
uuMaintenance MinderTMuTo Use Maintenance MinderTM
2013 Fit
1Maintenance Service Items
· Independent of the Maintenance Minder
information, replace the brake fluid every 3 years.
· Inspect idle speed every 160,000 miles (256,000
km).
· Adjust the valves during services A, B, 1, 2, or 3 if
they are noisy.
QRG
Sub Items
CODE A B
Maintenance Main Items Replace engine oil*1
Replace engine oil and oil filter Inspect front and rear brakes/service as necessary Check parking brake adjustment Inspect tie rod ends, steering gearbox, and boots Inspect suspension components Inspect driveshaft boots Inspect brake hoses and lines (Including ABS/VSA) Inspect all fluid levels and condition of fluids Inspect exhaust system# Inspect fuel lines and connections# Check expiration date for TRK bottle*2
*1: If a message SERVICE does not appear more than 12 months after the display is reset, change the engine oil every year.
*2: Canadian A/T models only # : See information on maintenance and emissions warranty.
CODE 1 2
3 4
5
Maintenance Sub Items Rotate tires Replace air cleaner element*3 Replace dust and pollen filter*4 Inspect drive belt Replace transmission fluid*5 Replace spark plugs Inspect valve clearance Replace engine coolant
*3: If you drive in dusty conditions, replace the air cleaner element every 15,000 miles (24,000 km). *4: If you drive primarily in urban areas that have high concentrations of soot in the air from industry and
from diesel-powered vehicles, replace every 15,000 miles (24,000 km). *5: If you tow a Fit behind a motorhome, the transmission fluid must be changed every 2 years or 30,000
miles (48,000 km), whichever comes first. (For A/T only)
Continued
Maintenance
TOC
Index Home
197
QRG
uuMaintenance MinderTMuTo Use Maintenance MinderTM
2013 Fit
Resetting the Display
Reset the engine oil life display if you have performed the maintenance service. 1. Turn the ignition switch to ON (w.
2. Display the engine oil life by repeatedly pressing the (select/reset) knob.
3. Press and hold the knob for ten seconds or more. u The engine oil life indicator and the maintenance item codes blink.
1Resetting the Display
NOTICE Failure to reset the engine oil life after a maintenance service results in the system showing incorrect maintenance intervals, which can lead to serious mechanical problems.
The dealer will reset the engine oil life display after completing the required maintenance service. If someone other than a dealer performs maintenance service, reset the engine oil life display yourself.
4. Press the knob for five seconds or more. u The displayed maintenance items disappear, and the engine oil life display returns to 100%.
TOC
Maintenance
Index
Home
198
Maintenance Under the Hood
Maintenance Items Under the Hood
Engine Oil Fill Cap
Washer Fluid (Blue Cap) Engine Oil Dipstick (Orange Loop)
Engine Coolant Reservoir
2013 Fit
QRG
Brake Fluid (Black Cap)
Manual transmission models
Clutch Fluid (Gray Cap)
Battery
Automatic transmission models
Automatic Transmission Fluid Dipstick (Yellow Loop)
TOC
Maintenance
Radiator Cap
Index
Home
199
QRG
uuMaintenance Under the HooduOpening the Hood
Opening the Hood
Hood Release Handle
1. Park the vehicle on a level surface, and set the parking brake.
2. Pull the hood release handle under the lower left corner of the dashboard. u The hood will pop up slightly.
2013 Fit
1Opening the Hood
NOTICE Do not open the hood when the wiper arms are raised. The hood will strike the wipers, and may damage either the hood or the wipers.
3. Push up the hood latch lever in the center of the hood to release the lock mechanism, and open the hood.
When closing the hood, check that the hood is securely latched.
If the hood latch lever moves stiffly, or if you can open the hood without lifting the lever, the latch mechanism should be cleaned and lubricated.
TOC Grip
Lever
Maintenance
Index
Support Rod
Home
200
Clamp
4. Remove the support rod from the clamp using the grip. Mount the support rod in the hood.
When closing, remove the support rod, and stow it in the clamp, then gently lower the hood. Remove your hand at a height of approximately 12 inches (30 cm) and let the hood close.
uuMaintenance Under the HooduRecommended Engine Oil
Recommended Engine Oil
2013 Fit
QRG
· Genuine Honda Motor Oil · Premium-grade 0W-20 detergent oil with an API Certification Seal on the
container.
Oil is a major contributor to your engine's
1Recommended Engine Oil
Engine Oil Additives Your vehicle does not require oil additives. In fact, they may adversely affect the engine performance and durability.
performance and longevity. If you drive the
vehicle with insufficient or deteriorated oil,
the engine may fail or be damaged.
This seal indicates the oil is energy conserving and that it meets the American Petroleum Institute's latest requirements.
Use a Genuine Honda Motor Oil or another commercial engine oil of suitable viscosity for the ambient temperature as shown.
TOC
Maintenance
Ambient Temperature
Synthetic oil You may also use synthetic motor oil if it is labeled with the API Certification Seal and is the specified viscosity grade.
Index
Home
201
uuMaintenance Under the HooduOil Check
QRG Oil Check
2013 Fit
We recommend that you check the engine oil level every time you refuel.
1Oil Check
Park the vehicle on level ground.
If the oil level is near or below the lower mark, slowly
Wait approximately three minutes after turning the engine off before you check the
add oil being careful not to overfill.
oil.
1. Remove the dipstick (orange loop).
2. Wipe the dipstick with a clean cloth or paper towel.
3. Insert the dipstick back all the way into its hole.
4. Remove the dipstick again, and check the level. It should be between the upper and lower marks. Add oil if necessary.
TOC
Upper Mark Lower Mark
Maintenance
Index
Home
202
uuMaintenance Under the HooduAdding Engine Oil
Adding Engine Oil
Engine Oil Fill Cap
2013 Fit
1. Unscrew and remove the engine oil fill cap.
2. Add oil slowly.
3. Reinstall the engine oil fill cap, and tighten it securely.
4. Wait for three minutes and recheck the engine oil dipstick.
1Adding Engine Oil If any oil spills, wipe it up immediately. Spilled oil may damage the engine compartment components.
NOTICE Do not fill the engine oil above the upper mark. Overfilling the engine oil can result in leaks and engine damage.
QRG
TOC
Maintenance
Index
Home
203
uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter
QRG Changing the Engine Oil and Oil Filter
2013 Fit
You must change the engine oil and oil filter regularly in order to maintain the
1Changing the Engine Oil and Oil Filter
engine's lubrication. The engine may be damaged if they are not changed regularly. NOTICE
Change the oil and filter in accordance with the Maintenance Minder message on
the information display.
Washer
1. Run the engine until it reaches normal operating temperature, and then turn the
engine off.
You may damage the environment if you do not dispose of the oil in a suitable way. If you are changing the oil by yourself, appropriately dispose of the used oil. Put the oil in a sealed container and take it to a recycling center. Do not throw the oil away into a garbage can or onto the ground.
2. Open the hood and remove the engine oil fill cap.
Drain Bolt
3. Remove the drain bolt and washer from the bottom of the engine, and drain the oil into a suitable container.
TOC
Maintenance
Index
Home
204
Oil Filter
uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter
4. Remove the oil filter and dispose of the remaining oil.
5. Check that the filter gasket is not stuck to the engine contact surface. u If it is stuck, you must detach it.
6. Wipe away dirt and dust adhering to the contact surface of the engine block, and install a new oil filter. u Apply a light coat of new engine oil to the oil filter rubber seal.
7. Put a new washer on the drain bolt, then reinstall the drain bolt. u Tightening torque: 29 lbfft (39 Nm, 4.0 kgfm)
8. Pour the recommended engine oil into the engine. u Engine oil change capacity (including filter): 3.8 US qt (3.6 L)
9. Reinstall the engine oil fill cap securely and start the engine.
10. Run the engine for a few minutes, and then check that there is no leak from the drain bolt or oil filter.
11. Stop the engine, wait for three minutes, and then check the oil level on the dipstick. u If necessary, add more engine oil.
2013 Fit
1Changing the Engine Oil and Oil Filter You will need a special wrench to replace the oil filter. You can buy this wrench from a dealer.
QRG
When installing the new oil filter, follow the instructions supplied with the oil filter.
Reinstall the engine oil fill cap. Start the engine. The low oil pressure indicator should go off within five seconds. If it does not, turn off the engine, and check your work.
TOC
Maintenance
Index
Home
205
Maintenance
QRG TOC
uuMaintenance Under the HooduEngine Coolant
Engine Coolant
Specified coolant: Honda Long Life Antifreeze/Coolant Type 2
1Engine Coolant
2013 Fit
This coolant is premixed with 50% antifreeze and 50% water. Do not add any straight antifreeze or water.
We recommend you check the engine coolant level every time you refuel. Check the reserve tank first. If it is completely empty, also check the coolant level in the radiator. Add the engine coolant accordingly.
Reserve Tank
Reserve Tank
MAX
1. Check the amount of coolant in the reserve tank.
NOTICE If Honda antifreeze/coolant is not available, you may use another major brand non-silicate coolant as a temporary replacement. Check that it is a high quality coolant recommended for aluminum engines. Continued use of any non-Honda coolant can result in corrosion, causing the cooling system to malfunction or fail. Have the cooling system flushed and refilled with Honda antifreeze/coolant as soon as possible.
Do not add rust inhibitors or other additives to your vehicle's coolant system. They may not be compatible with the coolant or with the engine components.
MIN
2. If the coolant level is below the MIN mark, add the specified coolant until it reaches the MAX mark.
3. Inspect the cooling system for leaks.
If temperatures consistently below -22°F (-30°C) are expected, the coolant mixture should be changed to a higher concentration. Consult a dealer for more information.
Index
Home
206
Radiator
Radiator Cap
uuMaintenance Under the HooduEngine Coolant
1Radiator
2013 Fit
QRG
1. Make sure the engine and radiator are cool.
2. Turn the radiator cap counterclockwise and relieve any pressure in the coolant system. Do not push the cap down when turning.
3. Push down and turn the radiator cap counterclockwise to remove it.
3 WARNING
Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you.
Always let the engine and radiator cool down before removing the radiator cap.
4. The coolant level should be up to the base of the filler neck. Add coolant if it is low.
5. Put the radiator cap back on, and tighten it fully.
NOTICE Pour the fluid slowly and carefully so you do not spill any. Clean up any spills immediately; they can damage components in the engine compartment.
6. Pour coolant into the reserve tank until it
reaches the MAX mark. Put the cap back
on the reserve tank.
TOC
Maintenance
Index
Home
207
uuMaintenance Under the HooduTransmission Fluid
Maintenance
QRG
TOC Index
Transmission Fluid
2013 Fit
Automatic Transmission Fluid
Specified fluid: Honda ATF DW-1 (automatic transmission fluid)
Check the fluid level when the engine is at normal operating temperature. 1. Park on level ground, and start the engine.
HOT Range
Upper Mark Lower Mark
2. Wait until the radiator fan starts and then turn off the engine. u Perform step 3 after waiting for about 60 seconds (less than 90 seconds).
3. Remove the dipstick (yellow loop) from the transmission and wipe it with a clean cloth.
4. Insert the dipstick all the way back into the transmission securely, as shown in the image.
1Automatic Transmission Fluid
NOTICE Do not mix Honda ATF DW-1 with other transmission fluids. Using a transmission fluid other than Honda ATF DW-1 may adversely affect the operation and durability of your vehicle's transmission, and damage the transmission. Any damage caused by using a transmission fluid that is not equivalent to Honda ATF DW-1 is not covered by Honda's new vehicle warranty.
NOTICE Pour the fluid slowly and carefully so you do not spill any. Clean up any spills immediately; they can damage components in the engine compartment.
5. Remove the dipstick and check the fluid level. u It should be between the upper and lower marks in the HOT range.
6. If the level is below the lower mark, add fluid into the dipstick hole to bring it to the level between the upper and lower marks, and have your vehicle checked by a dealer immediately.
Home
208
uuMaintenance Under the HooduTransmission Fluid
Manual Transmission Fluid
Specified fluid: Honda Manual Transmission Fluid (MTF)
Check the fluid level when the engine is at normal operating temperature.
Filter Bolt
1. Park the vehicle on level ground.
2. Remove the transmission filler bolt and
washer. Carefully feel inside the bolt hole with your fingers. u Check if the fluid level is up to the edge
of the bolt hole.
Washer
3. If the fluid level is not up to the edge of the bolt hole, add Honda Manual Transmission Fluid (MTF) until it runs out of the hole.
4. Put a new washer on the filler bolt, then reinstall the filler bolt. u Tightening torque: 33 lbfft (44 Nm, 4.5 kgfm)
2013 Fit
1Manual Transmission Fluid If Honda MTF is not available, you may use the API certificated SAE 10W-30 or 10W-40 viscosity motor oil as a temporary measure. Replace with MTF as soon as possible. Motor oil does not contain the proper additives for the transmission and continued use can cause decreased shifting performance and lead to transmission damage.
QRG TOC
Maintenance
Index
Home
209
QRG TOC
uuMaintenance Under the HooduBrake/Clutch Fluid
Brake/Clutch Fluid
Specified fluid: Honda Heavy Duty Brake Fluid DOT 3 Use the same fluid for both the brakes and clutch.
Checking the Brake Fluid
The fluid level should be between the MIN and MAX marks on the side of the reservoir.
MAX
MIN
Manual transmission models
Checking the Clutch Fluid
Clutch Reservoir
MAX
The fluid level should be between the MIN and MAX marks on the side of the reservoir.
2013 Fit
1Brake/Clutch Fluid NOTICE Brake fluid marked DOT 5 is not compatible with your vehicle's braking system and can cause extensive damage.
If the specified brake fluid is not available, you should use only DOT 3 or DOT 4 fluid from a sealed container as a temporary replacement.
Using any non-Honda brake fluid can cause corrosion and decrease the longevity of the system. Have the brake system flushed and refilled with Honda Heavy Duty Brake Fluid DOT 3 as soon as possible.
If the brake fluid level is at or below the MIN mark, have a dealer inspect for leaks or worn brake pads as soon as possible.
1Checking the Clutch Fluid If the clutch fluid level is at or below the MIN mark, have a dealer inspect for leaks or an excessively worn clutch plate as soon as possible.
Maintenance
Index
MIN Home
210
uuMaintenance Under the HooduRefilling Window Washer Fluid
Refilling Window Washer Fluid
Models without washer level sensor
Check the amount of window washer fluid. Look for 1/2 mark on the reservoir.
Fill up to here
If the level is low, fill the washer reservoir.
2013 Fit
1Refilling Window Washer Fluid
NOTICE Do not use engine antifreeze or a vinegar/water solution in the windshield washer reservoir. Antifreeze can damage your vehicle's paint. A vinegar/water solution can damage the windshield washer pump.
QRG
Windshield Washer Reservoir
Models with washer level sensor
If the washer fluid is low, the indicator appears on the instrument panel. Pour the washer fluid carefully. Do not overflow the reservoir.
TOC
Maintenance
Index
Home
211
QRG TOC
Replacing Light Bulbs
Headlight Bulbs
When replacing, use the following bulbs. High/Low beam headlight: 60/55 W (HB2)
High/Low Beam Headlight
Bulb
1. Remove the coupler.
2. Remove the rubber weather seal.
Coupler
Rubber Weather Seal
3. Remove the hold-down wire, then remove the bulb.
4. Insert a new bulb.
Hold-Down Wire
2013 Fit
1Headlight Bulbs
NOTICE Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.
The headlight aim is set by the factory, and does not need to be adjusted. However, if you regularly carry heavy items in the cargo area, have the aiming readjusted at a dealer or by a qualified technician.
The HB2 type is halogen bulb. When replacing a bulb, handle it by its base, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.
The exterior lights' inside lenses (headlights, brake lamps, etc.) may fog temporarily after a vehicle wash or while driving in the rain. This does not impact the exterior light function. However, if you see a large amount of water or ice accumulated inside the lenses, have your vehicle inspected by a dealer.
Maintenance
Index
Home
212
uuReplacing Light BulbsuFront Turn Signal Light Bulbs
Hold-Down Wire Inspection Window
5. Reinstall the hold-down wire. Hook the end of the wire on the knob in the slot. u You can see if the hold-down wire is in the right place from the inspection window.
6. Reinstall the rubber weather seal.
7. Insert the coupler into the connector of the bulb.
2013 Fit
QRG
Front Turn Signal Light Bulbs
When replacing, use the following bulbs. Front Turn Signal Light: 21 W (Amber)
Socket
Bulb
1. Turn the socket to the left and remove it.
2. Push in the old bulb, rotate to the left until
TOC
it unlocks, and remove.
3. Insert a new bulb.
Maintenance
Index
Home
213
uuReplacing Light BulbsuParking/Side Marker Light Bulbs
QRG Parking/Side Marker Light Bulbs
When replacing, use the following bulbs. Parking/Side Marker Light: 3.8 W (Amber)
Socket
Bulb
1. Turn the socket to the left and remove it.
2. Remove the old bulb and insert a new bulb.
2013 Fit
Fog Light Bulbs*
1Fog Light Bulbs*
Maintenance
When replacing, use the following bulbs.
Fog Light: 55 W (H11) TOC
Cover
1. Pry on the edge of the cover using a flat-tip screwdriver to remove the cover. u Wrap the flat-tip screwdriver with a cloth to prevent scratches.
NOTICE Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.
The fog lights are halogen bulbs. When replacing a bulb, handle it by its plastic case, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.
Index
Home
214 * Not available on all models
2. Remove the screw using a Phillips-head screwdriver and carefully pull the fog light assembly out of the bumper.
uuReplacing Light BulbsuFog Light Bulbs*
2013 Fit
QRG
Screw
Bulb 3. Remove the coupler. u It can be removed by pushing the tab.
4. Rotate the old bulb to the left to remove.
5. Insert a new bulb into the fog light
Coupler
assembly and turn it to the right.
6. Insert the coupler into the connector of the
Tab
bulb.
TOC
Maintenance
* Not available on all models
Index
Home
215
uuReplacing Light BulbsuBrake Light, Taillight, Back-Up Light and Rear Turn Signal Light Bulbs
QRG Brake Light, Taillight, Back-Up Light and Rear Turn Signal Light Bulbs
When replacing, use the following bulbs. Brake/Taillight: 21/5 W Back-Up Light: 16 W Rear Turn Signal Light: 21 W (Amber)
1. Pry on the edge of the cover using a flat-tip screwdriver to remove the cover. u Wrap the flat-tip screwdriver with a cloth to prevent scratches.
Cover
2. Turn the socket to the left and remove it.
TOC
Remove the old bulb.
3. Insert a new bulb.
Maintenance
Index
Home
216
Socket
Bulb
2013 Fit
uuReplacing Light BulbsuHigh-Mount Brake Light Bulb
High-Mount Brake Light Bulb
High-mount brake light bulb is a LED type. Have an authorized Honda dealer inspect and replace the light bulb.
2013 Fit
QRG
Rear License Plate Light Bulb
When replacing, use the following bulb. Rear License Plate Light: 5 W
Lens
1. Push the lens on the left and pull out the
lens and the socket attached to it.
2. Remove the license plate light assembly by
Bulb
squeezing the tabs on both sides of the
socket.
3. Remove the old bulb and insert a new bulb.
Maintenance
TOC
Index Home
217
Checking and Maintaining Wiper Blades
QRG Checking Wiper Blades
If the wiper blade rubber has deteriorated, it will leave streaks and the metal wiper arm may scratch the window glass.
2013 Fit
Changing the Front Wiper Blade Rubber
1. Lift the driver side wiper arm first, then the passenger side.
1Changing the Front Wiper Blade Rubber
NOTICE Avoid dropping the wiper arm; it may damage the windshield.
TOC Lock Tab
2. Place a cloth on the edge of the lock tab. Push the lock tab up with a flat-tip screwdriver.
3. Slide the blade from the wiper arm.
Maintenance
Index
Home
218
Blade
uuChecking and Maintaining Wiper BladesuChanging the Front Wiper Blade Rubber
2013 Fit
4. Slide the wiper blade out from its holder by pulling the tabbed end out.
QRG
Retainer Top
Blade
5. Remove the retainers from the rubber blade that has been removed, and mount to a new rubber blade. u Correctly align the rubber protrusion and the retainer grooves.
6. Slide the new wiper blade onto the holder from the bottom end. u The tab on the holder should fit in the indent of the wiper blade.
7. Slide the wiper blade onto the wiper arm, then push down the lock tab.
8. Lower the passenger side wiper arm first, then the driver side.
Maintenance
TOC
Index Home
219
uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade Rubber
QRG Changing the Rear Wiper Blade Rubber
Wiper Arm
1. Raise the wiper arm off.
2013 Fit
1Changing the Rear Wiper Blade Rubber NOTICE Avoid dropping the wiper blade; it may damage the rear window.
Blade
2. Pivot up the bottom end of the wiper blade until it comes off from the wiper arm.
TOC
Maintenance
Index
Home
220
Blade
3. Slide the wiper blade out from the end with the indent.
Retainer
uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade Rubber
4. Remove the retainers from the rubber blade that has been removed, and mount to a new rubber blade.
2013 Fit
QRG
Rubber
5. Slide the wiper blade onto the holder. u Make sure it is engaged correctly, then install the wiper blade assembly onto the wiper arm.
TOC
Maintenance
Index
Home
221
Checking and Maintaining Tires
QRG Checking Tires
To safely operate your vehicle, your tires must be of the proper type and size, in good condition with adequate tread, and properly inflated.
Inflation guidelines Properly inflated tires provide the best combination of handling, tread life, and comfort. Refer to the driver's doorjamb label or specification's page for the specified pressure.
Underinflated tires wear unevenly, adversely affect handling and fuel economy, and are more likely to fail from overheating.
Overinflated tires make your vehicle ride harshly, are more prone to road hazards, and wear unevenly.
Every day before you drive, look at each of the tires. If one looks lower than the others, check the pressure with a tire gauge.
At least once a month or before long trips, use a gauge to measure the pressure in all tires, including the spare. Even tires in good condition can lose 1 to 2 psi (10 to 20 kPa, 0.1 to 0.2 kgf/cm2) per month. TOC
Maintenance
Inspection guidelines Every time you check inflation, also examine the tires and valve stems. Look for:
· Bumps or bulges on the side or in the tread. Replace the tire if you find any cuts, splits, or cracks in the side of the tire. Replace it if you see fabric or cord.
Index Home
· Remove any foreign objects and inspect for air leaks. · Uneven tread wear. Have a dealer check the wheel alignment. · Excessive tread wear.
2 Wear Indicators P. 227
· Cracks or other damage around valve stem.
222
2013 Fit
1Checking Tires
3 WARNING
Using tires that are excessively worn or improperly inflated can cause a crash in which you can be seriously hurt or killed.
Follow all instructions in this owner's manual regarding tire inflation and maintenance.
Measure the air pressure when tires are cold. This means the vehicle has been parked for at least three hours, or driven less than 1 mile (1.6 km). If necessary, add or release air until the specified pressure is reached.
If checked when hot, tire pressure can be as much as 46 psi (3040 kPa, 0.30.4 kgf/cm2) higher than if checked when cold.
Have a dealer check the tires if you feel a consistent vibration while driving. New tires and any that have been removed and reinstalled should be properly balanced.
uuChecking and Maintaining TiresuTire and Loading Information Label
Tire and Loading Information Label
The label attached to the driver's doorjamb provides necessary tire and loading information.
Label Example
2013 Fit
1Tire and Loading Information Label The tire and loading information label attached to the driver's doorjamb contains: a The number of people your vehicle can carry. b The total weight your vehicle can carry. Do not exceed this weight. c The original tire sizes for front, rear, and spare. d The proper cold tire pressure for front, rear, and spare.
QRG
Tire Labeling
Example
Tire Size Tire Identification Number (TIN)
Maximum Tire Load
Maximum Tire Pressure Tire Size
The tires that came on your vehicle have a number of markings. Those you should be aware of are described below.
Tire Sizes
Whenever tires are replaced, they should be replaced with tires of the same size.
1Tire Sizes Following is an example of tire size with an explanation of what each component means. 175/65R15 84S
175: Tire width in millimeters. 65: Aspect ratio (the tire's section height as a
percentage of its width). R: Tire construction code (R indicates radial). 15: Rim diameter in inches. 84: Load index (a numerical code associated with the
maximum load the tire can carry). S: Speed symbol (an alphabetical code indicating the
maximum speed rating).
Maintenance
TOC Index
Continued
Home
223
uuChecking and Maintaining TiresuTire Labeling
2013 Fit
QRG
Tire Identification Number (TIN)
1Tire Identification Number (TIN)
The tire identification number (TIN) is a group of numbers and letters that look like the example in the side column. TIN is located on the sidewall of the tire.
Glossary of Tire Terminology
DOT B97R FW6X 2209 DOT: This indicates that the tire meets all
requirements of the U.S. Department of Transportation.
B97R: Manufacturer's identification mark.
Cold Tire Pressure The tire air pressure when the vehicle has been parked for at least three hours or driven less than 1 mile (1.6 km).
Load Rating Means the maximum load that a tire is rated to carry for a given inflation pressure.
FW6X: Tire type code.
22 09: Date of manufacture.
Year Week
Maximum Inflation Pressure The maximum tire air pressure that the tire can hold.
Maximum Load Rating Means the load rating for a tire at the maximum permissible inflation pressure for that tire.
TOC Recommended Inflation Pressure The cold tire inflation pressure recommended by the manufacturer.
Treadwear Indicators (TWI) Means the projections within the principal grooves designed to give a visual indication of the degrees of wear of the tread.
Maintenance
Index
Home
224
uuChecking and Maintaining TiresuDOT Tire Quality Grading (U.S. Vehicles)
DOT Tire Quality Grading (U.S. Vehicles)
The tires on your vehicle meet all U.S. Federal Safety Requirements. All tires are also graded for treadwear, traction, and temperature performance according to Department of Transportation (DOT) standards. The following explains these gradings.
2013 Fit
QRG
Uniform Tire Quality Grading
1Uniform Tire Quality Grading
Quality grades can be found where applicable on the tire sidewall between
For example:
tread shoulder and maximum section width.
Treadwear 200
Traction AA
Temperature A
Treadwear
The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half (1 1/2) times as well
All passenger car tires must conform to Federal Safety Requirements in addition to these grades.
on the government course as tire graded 100. The relative performance of
TOC
tires depends upon the actual conditions of their use, however, and may depart significantly from the norm due to variations in driving habits, service practices, and differences in road characteristics and climate.
Maintenance
Continued
Index
Home
225
uuChecking and Maintaining TiresuDOT Tire Quality Grading (U.S. Vehicles)
QRG
Traction
The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.
Temperature
The temperature grades are A (the highest), B, and C, representing the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temp erature can lead to sudden tire failure. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety TOC Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law.
2013 Fit
1Traction
Warning: The traction gradeassigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or or peak traction characteristics.
1Temperature
Warning: The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure.
Maintenance
Index
Home
226
Wear Indicators
Example of a Wear Indicator mark
The groove where the wear indicator is located is 1/16 inch (1.6 mm) shallower than elsewhere on the tire. If the tread has worn so that the indicator is exposed, replace the tire. Worn out tires have poor traction on wet roads.
uuChecking and Maintaining TiresuWear Indicators
2013 Fit
QRG
Tire Service Life
The life of your tires is dependent on many factors, including driving habits, road conditions, vehicle loading, inflation pressure, maintenance history, speed, and environmental conditions (even when the tires are not in use).
In addition to regular inspections and inflation pressure maintenance, it is
recommended that you have annual inspections performed once the tires reach five
TOC
years old. All tires, including the spare, should be removed from service after 10
years from the date of manufacture, regardless of their condition or state of wear.
Maintenance
Index
Home
227
uuChecking and Maintaining TiresuTire and Wheel Replacement
QRG Tire and Wheel Replacement
2013 Fit
Replace your tires with radials of the same size, load range, speed rating, and
1Tire and Wheel Replacement
maximum cold tire pressure rating (as shown on the tire's sidewall). Using tires of a different size or construction can cause the ABS and VSA® (vehicle stability assist)
3 WARNING
system to work incorrectly.
Installing improper tires on your vehicle can
affect handling and stability. This can cause
It is best to replace all four tires at the same time. If that isn't possible, replace the
a crash in which you can be seriously hurt or
front or rear tires in pairs.
killed.
Make sure that the wheel's specifications match those of the original wheels.
U.S. models only
If you replace a wheel, only use TPMS specified wheels approved for your vehicle.
Always use the size and type of tires recommended in this owner's manual.
TOC
Maintenance
Index
Home
228
Tire Rotation
Rotating tires according to the Maintenance Minder message on the information display helps to distribute wear more evenly and increase tire life.
Tires without rotation marks Rotate the tires as shown here.
uuChecking and Maintaining TiresuTire Rotation
2013 Fit
1Tire Rotation Tires with directional tread patterns should only be rotated front to back (not from one side to the other). Directional tires should be mounted with the rotation indication mark facing forward, as shown below.
QRG
Front
Front
Direction Mark
Tires with rotation marks
Rotate the tires as shown here.
TOC Front
Maintenance
Index
Home
229
uuChecking and Maintaining TiresuWinter Tires
QRG Winter Tires
2013 Fit
If driving on snowy or frozen roads, mount all season marked "M+S" tires, snow 1Winter Tires
tires, or tire chains; reduce speed; and maintain sufficient distance between vehicles when driving.
3 WARNING
Be particularly careful when operating the steering wheel or brakes to prevent skidding.
Using the wrong chains, or not properly installing chains, can damage the brake lines and cause a crash in which you can be
Use tire chains, snow tires, or all season tires when necessary or according to the law. seriously injured or killed.
When mounting, refer to the following points.
For winter tires: · Select the size and load ranges that are the same as the original tires.
· Mount the tires to all four wheels.
For tire chains: · Install them on the front tires only.
· Because your vehicle has limited tire clearance, we strongly recommend using the
TOC
chains listed below:
Models with 175/65R15 tires
Cable-type: SCC Radial Chain SC1026
Follow all instructions in this owner's manual regarding the selection and use of tire chains.
NOTICE Traction devices that are the wrong size or improperly installed can damage your vehicle's brake lines, suspension, body, and wheels. Stop driving if they are hitting any part of the vehicle.
When tire chains are mounted, follow the chain manufacturer's instructions regarding vehicle operational limits.
Maintenance
Index Home
Models with 185/55R16 tires
Cable-type: SCC Radial Chain SC1030
· Follow the chain manufacturer's instruction when installing. Mount them as tightly as you can.
· Check that the chains do not touch the brake lines or suspension. · Drive slowly.
If your vehicle is equipped with summer tires, be aware that these tires are not designed for winter driving conditions. For more information, contact a dealer.
230
Battery
Checking the Battery
2013 Fit
QRG
Test Indicator Window
Check the battery condition monthly. Look at the test indicator window and check the terminals for corrosion.
1Battery
3 WARNING
The battery gives off explosive hydrogen
gas during normal operation.
A spark or flame can cause the battery to explode with enough force to kill or seriously hurt you.
If your vehicle's battery is disconnected or goes dead: · The audio system* is disabled.
2 Entering the Audio Security Code P. 124
· The clock resets.
2 Setting the Clock P. 76
· The navigation system* is disabled.
2 Refer to the navigation system manual
Charging the Battery
Disconnect both battery cables to prevent damaging your vehicle's electrical system. Always disconnect the negative () cable first, and reconnect it last.
When conducting any battery maintenance, wear protective clothing and a face shield, or have a skilled technician do it.
WARNING: Battery post, terminals, and related accessories contain lead and lead compounds. Wash your hands after handling.
The test indicator's color information is on the battery.
When you find corrosion, clean the battery terminals by applying a baking powder and water solution. Rinse the terminals with water. Cloth/towel dry the battery. Coat the terminals with grease to help prevent future corrosion.
Maintenance
TOC Index
* Not available on all models
Home
231
Remote Transmitter Care*
Replacing the Battery
QRG If the indicator does not come on when the button is pressed, replace the battery. 1Replacing the Battery
2013 Fit
Keypad
Battery type: CR1616
1. Unscrew the cover with a small Phillipshead screwdriver. u Wrap the small flat-tip screwdriver with a cloth to prevent scratching the transmitter.
NOTICE An improperly disposed of battery can damage the environment. Always confirm local regulations for battery disposal.
Replacement batteries are commercially available or at a dealer.
Screw
Tab
2. Open the keypad.
u Wrap a coin with a cloth to prevent
scratching the transmitter.
Battery
3. Make sure to replace the battery with the correct polarity.
TOC
Maintenance
Index
Home
232 * Not available on all models
Heating and Cooling* System Maintenance
Dust and Pollen Filter
2013 Fit
QRG
The heating and cooling system is equipped with a dust and pollen filter that collects 1Dust and Pollen Filter
pollen, dust, and other debris in the air. The Maintenance Minder message will let
If the airflow from the heating and cooling system
you know when to replace the filter.
deteriorates noticeably, and the windows fog up easily, the filter may need to be replaced. Please
We recommend that you replace the dust and pollen filter sooner when using your contact a dealer for replacement.
vehicle in areas with high concentrations of dust.
* Not available on all models
Maintenance
TOC
Index Home
233
Cleaning
QRG Interior Care
2013 Fit
Use a damp cloth with a mixture of mild detergent and warm water to remove dirt. 1Interior Care
Use a clean cloth to remove detergent residue.
Do not spill liquids inside the vehicle.
Electrical devices and systems may malfunction if
Cleaning Seat Belts
liquids are splashed on them.
Use a soft brush with a mixture of mild soap and warm water to clean the seat belts. Let the belts air dry. Wipe the loop of the seat belt anchors using a clean cloth.
Loop
Do not use silicone based sprays on electrical devices such as audio devices and switches. Doing so may cause the items to malfunction or a fire inside the vehicle. If a silicone based spray is inadvertently used on electrical devices, consult a dealer.
Depending on their composition, chemicals and liquid aromatics may cause discoloration, wrinkles, and cracking to resin-based parts and textiles. Do not use alkali solvents or organic solvents such as benzene or gasoline.
TOC
Floor Mats*
Maintenance
Unlock
Index
Lock
Home
234 * Not available on all models
The driver's floor mat hooks over the floor anchors, which keep the mat from sliding forward. To remove a mat for cleaning, turn the anchor knobs to the unlock position. When reinstalling the mat after cleaning, turn the knobs to the lock position.
Do not put additional floor mats on top of the anchored mat.
After using chemicals, make sure to gently wipe them off using a dry cloth. Do not place used cloths on top of resin based parts or textiles for long periods of time without washing.
1Floor Mats*
If you use any floor mats that were not originally provided with your vehicle, make sure they are designed for your specific vehicle, fit correctly, and are securely anchored by the floor anchors. Position the rear seat floor mats properly. If they are not properly positioned, the floor mats can interfere with the front seat functions.
Exterior Care
Dust off the vehicle body after you drive. Regularly inspect your vehicle for scratches on painted surfaces. A scratch on a painted surface can result in body rust. If you find a scratch, promptly repair it.
uuCleaninguExterior Care
2013 Fit
QRG
Washing the Vehicle
Wash the vehicle regularly. Wash more frequently when driving in the following conditions: · If driving on roads with road salt.
· If driving in coastal areas.
· If tar, soot, bird droppings, insects, or tree sap are stuck to painted surfaces.
1Washing the Vehicle
Do not spray water into the air intake vents or engine compartment. It can cause a malfunction.
Using an Automated Vehicle Wash
· Remove the audio antenna.
2 Audio Antenna P. 124
· Fold in the door mirrors.
Air Intake Vents TOC
Make sure to follow the instructions indicated on the automated vehicle wash.
Maintenance
Using High Pressure Cleaners
· Keep sufficient distance between the cleaning nozzle and the vehicle body.
· Take particular care around the windows. Standing too close may cause water to enter the vehicle interior. Do not spray water into the engine compartment.
Index
Continued
Home
235
uuCleaninguExterior Care
QRG
Applying Wax
A good coat of automotive body wax helps protect your vehicle's paint from the elements. Wax will wear off over time and expose your vehicle's paint to the elements, so reapply as necessary.
2013 Fit
1Applying Wax NOTICE Chemical solvents and strong cleaners can damage the paint, metal, and plastic on your vehicle. Wipe up spills immediately.
Maintaining the Bumpers and Other Resin Coated Parts
If you get gasoline, oil, engine coolant, or battery fluid on resin coated parts, they may be stained or the coating may peel. Promptly wipe it away using a soft cloth and clean water.
1Maintaining the Bumpers and Other Resin Coated Parts
Ask a dealer about the correct coating material when you want to repair the painted surface of the parts made of resin.
Cleaning the Window
Wipe using a glass cleaner.
1Cleaning the Window
Wires are mounted to the inside of the rear window. Wipe along the same direction as the wires with a soft cloth so as not to damage them.
TOC Maintaining Aluminum Wheels*
Maintenance
Aluminum is susceptible to deterioration caused by salt and other road contaminants. Use a sponge and mild detergent to wipe away promptly. Be careful not to use harsh chemicals (including some commercial wheel cleaners) or a stiff brush. They can damage the clear coat of the aluminum alloy wheels that helps keep the aluminum from corroding and tarnishing.
Index
Home
236 * Not available on all models
2013 Fit
QRG
Handling the Unexpected
This chapter explains how to handle unexpected troubles.
Tools Types of Tools .................................. 238
If a Tire Goes Flat Changing a Flat Tire* ....................... 239 Temporarily Repairing a Flat Tire....... 245
Engine Does Not Start Checking the Engine ........................ 250
Jump Starting.................................... 251 Shift Lever Does Not Move .............. 253 Overheating
How to Handle Overheating............. 254
* Not available on all models
Indicator, Coming On/Blinking If the Low Oil Pressure Indicator Comes On.................................... 256 If the Charging System Indicator Comes On ..................................... 256 If the Malfunction Indicator Lamp Comes On or Blinks......................... 257 If the Brake System Indicator Comes On ..258 If the EPS System Indicator Comes On ..258 If the Low Tire Pressure Indicator Comes On ..................................... 259 If the TPMS Indicator Comes On ...... 259
Fuses Fuse Locations ................................. 260 Inspecting and Changing Fuses........ 263
Emergency Towing........................... 264
Index
Home
237
Tools
QRG Types of Tools
Wheel Nut Wrench/ Jack Handle
2013 Fit
1Types of Tools The tools were stored in the cargo area.
Handling the Unexpected
Models with compact spare tire
Tool Bag
TOC
Models with tire repair kit
Tool Bag
Jack
Jack Index
Home
238
Jack Handle Bar Detachable Towing Hook
Jack
If a Tire Goes Flat
Changing a Flat Tire*
2013 Fit
QRG
If a tire goes flat while driving, grasp the steering wheel firmly, and brake gradually 1Changing a Flat Tire*
to reduce speed. Then, stop in a safe place. Replace the flat tire with a compact spare tire. Go to a dealer as soon as possible to have the full size tire repaired or replaced.
Periodically check the tire pressure of the compact spare. It should be set to the specified pressure. Specified Pressure: 60 psi (420 kPa, 4.2 kgf/cm2)
1. Park the vehicle on firm, level, non-slippery surface and apply the parking brake.
Automatic transmission models
2. Move the shift lever to (P.
Manual transmission models
2. Move the shift lever to (R.
When driving with the compact spare tire, keep the vehicle speed under 50 mph (80 km/h). Replace with a full size tire as soon as possible.
The compact spare tire and wheel in your vehicle are specifically for this model. Do not use them with another vehicle. Do not use another type of compact spare tire or wheel with your vehicle.
Handling the Unexpected
All models
3. Turn on the hazard warning lights and turn the ignition switch to LOCK (0.
Do not mount tire chains on a compact spare tire. If a chain-mounted front tire goes flat, remove one of the full-size rear tires and replace it with the compact spare tire. Remove the flat front tire and replace it with the full size tire that was removed from the rear. Mount the tire chains on the front tire.
U.S. models only
Do not use a puncture-repairing agent on a flat tire, as it can damage the tire pressure sensor.
TOC
* Not available on all models
Continued
Index
Home
239
uuIf a Tire Goes FlatuChanging a Flat Tire*
QRG
Getting Ready to Replace the Flat Tire
1. Open the cargo area floor lid.
Handling the Unexpected
Spare Tire TOC
Tool Bag
2. Take the tool bag out of the spare tire. Take the wheel nut wrench and the jack handle bar out of the tool bag.
3. Take the jack out of the cargo area.
4. Unscrew the wing bolt, and remove the spacer cone. Then, remove the spare tire.
Jack
5. Place a wheel block or rock in front and rear of the wheel diagonal to the flat tire.
Index Home
Wheel
Blocks The tire to be replaced.
240 * Not available on all models
2013 Fit
uuIf a Tire Goes FlatuChanging a Flat Tire*
6. Place the compact spare tire (wheel side up) under the vehicle body, near the tire that needs to be replaced.
1Getting Ready to Replace the Flat Tire
2013 Fit
QRG
Handling the Unexpected
Jack Handle Bar Wheel Nut
Models with wheel cover
7. Put the flat tip of the jack handle bar into the edge of the wheel cover. Carefully pry the edge and remove the cover. u Wrap a cloth around the flat tip of the jack handle bar to prevent scratches on the cover.
Models with wheel cover
Valve Mark
Wheel Cover
All models
8. Loosen each wheel nut about one turn using the wheel nut wrench.
Align the valve mark on the wheel cover to the tire
TOC
valve on the wheel, then install the wheel cover.
* Not available on all models
Continued
Index
Home
241
uuIf a Tire Goes FlatuChanging a Flat Tire*
QRG
How to Set Up the Jack
1. Place the jack under the jacking point closest to the tire to be changed.
2013 Fit
1How to Set Up the Jack
3 WARNING
The vehicle can easily roll off the jack, seriously injuring anyone underneath.
Follow the directions for changing a tire exactly, and never get under the vehicle when it is supported only by the jack.
Handling the Unexpected
2. Turn the end bracket (as shown in the image) clockwise until the top of the jack contacts the jacking point. u Make sure that the jacking point tab is resting in the jack notch.
Do not use the jack with people or luggage in the vehicle.
Use the jack provided in your vehicle. Other jacks may not support the weight ("load") or their shape may not match.
The following instructions must be followed to use
the jack safely.
· Do not use while the engine is running.
· Use only where the ground is firm and level.
TOC
3. Raise the vehicle, using the jack handle bar · Use only at the jacking points.
and the jack handle, until the tire is off the
· Do not get in the vehicle while using the jack.
ground.
· Do not put anything on top of or underneath the
jack.
Index Home
Jack Handle Bar
Wheel Nut Wrench as Jack Handle
242 * Not available on all models
Replacing the Flat Tire
1. Remove the wheel nuts and flat tire.
uuIf a Tire Goes FlatuChanging a Flat Tire*
2013 Fit
1Replacing the Flat Tire Do not over tighten the wheel nuts by applying extra torque using your foot or a pipe.
QRG
Handling the Unexpected
2. Wipe the mounting surfaces of the wheel with a clean cloth.
3. Mount the compact spare tire.
4. Screw the wheel nuts until they touch the lips around the mounting holes, and stop rotating.
5. Lower the vehicle and remove the jack. Tighten the wheel nuts in the order indicated in the image. Go around, tightening the nuts, two to three times in this order.
Wheel nut torque: 80 lbfft (108 Nm, 11 kgfm)
* Not available on all models
Continued
TOC
Index Home
243
uuIf a Tire Goes FlatuChanging a Flat Tire*
2013 Fit
QRG
Storing the Flat Tire
1Storing the Flat Tire
Wing Bolt
Models with aluminum wheels
For normal tire 1. Remove the center cap.
Spacer Cone
For compact spare tire
All models
2. Place the flat tire face down in the spare tire well.
3. Remove the spacer cone from the wing bolt, flip it over, and insert it back on the bolt. Secure the flat tire with the wing bolt.
3 WARNING
Loose items can fly around the interior in a crash and can seriously injure the occupants. Store the wheel, jack, and tools securely before driving.
4. Securely store the wheel nut wrench and jack handle bar back in the tool bag. Store the bag in the center of the flat tire.
5. Store the jack. Turn the jack's end bracket to lock it in place.
Handling the Unexpected
TOC Index
TPMS and the Spare Tire
U.S. models
If you replace a flat tire with the spare tire, the low tire pressure indicator comes on while you are driving. After driving for a few miles (kilometers), the indicator will go off and the TPMS indicator comes on, but this is normal.
If you replace the tire with a specified regular tire, the low tire pressure or TPMS indicator will go off after a few miles (kilometers).
1TPMS and the Spare Tire The system cannot monitor the pressure of the spare tire. Manually check the spare tire pressure to be sure that it is correct.
Use TPMS specific wheels. Each is equipped with a tire pressure sensor mounted inside the tire behind the valve stem.
Home
244
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
Canadian models with automatic transmission
Temporarily Repairing a Flat Tire
If the tire has a large cut or is otherwise severely damaged, you will need to have the vehicle towed. If the tire only has a small puncture, from a nail for instance, you can use the tire repair kit so that you can drive to the nearest service station for a more permanent repair.
If a tire goes flat while driving, grasp the steering wheel firmly, and brake gradually to reduce speed. Then stop in a safe place.
1. Park the vehicle on firm, level, and non-slippery ground.
2. Put the shift lever in (P.
3. Set the parking brake.
4. Turn on the hazard warning lights and turn the ignition switch to LOCK (0.
Getting Ready to Temporarily Repair the Flat Tire
Expiration Date
Speed Limit Label
2013 Fit
1Temporarily Repairing a Flat Tire
The kit should not be used in the following situations. Instead, contact a dealer or a roadside assistant to have the vehicle towed.
· The tire sealant has expired. · More than two tires are punctured. · The puncture is greater than 3/16 inch (4 mm) in
diameter.
· The tire side wall is damaged or the puncture is
outside the tire tread.
When the puncture is:
Contact Area
Smaller than 3/16 inch (4 mm)
Larger than 3/16 inch (4 mm)
Kit Use Yes No
· Damage has been caused by driving with the tires
extremely under inflated.
· The tire bead is no longer seated. · A rim is damaged.
Do not remove a nail or screw that punctured the tire. If you remove it from the tire, you may not be able to repair the puncture using the kit.
Handling the Unexpected
QRG TOC
Air Compressor
Sealant Bottle
Instruction Manual
Wheel Label
Continued
NOTICE Do not use a puncture-repairing agent other than the one provided in the kit that came with your vehicle. If used, you may permanently damage the tire pressure sensor.
Index
Home
245
QRG
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
2013 Fit
Injecting Sealant and Air
Floor Lid
1. Pull up the strap and open the cargo area floor lid.
2. Take the kit out of the case. u Place the kit on flat ground near the flat tire, away from traffic.
Tire Repair Kit Tire Valve Stem
Strap
3. Remove the valve cap from the tire valve stem.
1Injecting Sealant and Air When making a temporary repair, carefully read the handling manual provided with the kit.
In cold temperatures, the sealant may not flow easily. In this situation, warm it up for five minutes before using.
The sealant is latex based and can permanently stain clothing and other materials. Be careful during handling and wipe up any spills immediately.
Handling the Unexpected
Valve Cap
TOC
Tire Valve Stem
Index
Home
246
Sealant/air hose
4. Shake the sealant bottle.
5. Attach the sealant/air hose onto the tire valve stem. Screw it until it is tight. u Make sure the bottle remains upright to ensure all of the sealant flows into the tire.
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
Bottle Adapter
Bottle Cap
Air Compressor Hose
Air Compressor Switch
OFF ON
6. Remove the bottle cap from the bottle adapter.
7. Attach the air compressor hose onto the bottle adapter. Screw it until it is tight.
8. Plug in the compressor to the accessory power socket. Be careful not to pinch the cord in a door or window.
9. Turn the ignition switch to ACCESSORY (q. u In freezing temperatures, start the engine on and leave it running while the flat tire is being serviced.
2 Carbon Monoxide Gas P. 61
10. Turn the air compressor on to inflate the tire. u The compressor starts injecting sealant and air into the tire.
11. Inflate the tire.
12. After the air pressure reaches to 33 psi (230 kPa), turn off the kit. u Check the air pressure gauge on the air compressor.
2013 Fit
1Injecting Sealant and Air
NOTICE Operating the pump for more than 15 minutes may cause it to overheat and become permanently damaged.
3 WARNING
Running the engine with the vehicle in an enclosed or even partly enclosed area can cause a rapid build-up of toxic carbon monoxide.
Breathing this colorless, odorless gas can cause unconsciousness and even death.
Only run the engine to power the air compressor with the vehicle outdoors.
Until the sealant injection is complete, the pressure shown on the pressure gauge will appear higher than actual. After the sealant injection is complete the pressure will drop and then begin to rise again as the tire is inflated with air. This is normal. To accurately measure the air pressure using the gauge, turn the air compressor off only after the sealant injection is complete.
Handling the Unexpected
QRG
TOC Index Home
Continued
247
QRG
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
2013 Fit
Air Pressure Gauge Deflate Button
Wheel Label
13. Unscrew the sealant/air hose from the tire valve stem. Reinstall the valve cap.
14. Push the deflate button until the gauge returns 0 psi.
1Injecting Sealant and Air
If the required air pressure is not reached within 15 minutes, the tire may be too severely damaged for the kit to provide the necessary seal and your vehicle will need to be towed.
Keep the empty bottle after the sealant is injected. The sealant bottle will be used to collect the injected sealant by a professional.
15. Apply the wheel label to the flat surface of the wheel. u The wheel surface must be clean to ensure the label adheres properly.
Handling the Unexpected
TOC Index
Distributing the Sealant in the Tire
1. Apply the speed limit label to the location
Speed Limit Label
as shown.
2. Drive the vehicle for about 5 minutes. u Do not exceed 50 mph (80 km/h).
3. Stop the vehicle in a safe place.
1Distributing the Sealant in the Tire
Stop and recheck the air pressure after every 5 minutes of driving as necessary until you reach the nearest service station where you should have the tire permanently repaired or replaced.
Home
248
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
4. Recheck the air pressure using the gauge on the air compressor. u Do not turn the air compressor on to check the pressure. If the air pressure is: u Less than 19 psi (130 kPa), do not add air or continue driving. The leak is too severe. Call for help and have your vehicle towed.
2 Emergency Towing P. 264
u 33 psi (230 kPa) or more, continue driving for another 5 minutes or until you reach the nearest service station. Do not exceed 50 mph (80 km/h).
u Greater than 19 psi (130 kPa), but less than 33 psi (230 kPa), add air using the pump until the tire pressure reaches 33 psi (230 kPa), then drive carefully for 5 more minutes or until you reach the nearest service station. Do not exceed 50 mph (80 km/h).
5. Repackage and properly stow the kit.
2013 Fit
QRG
TOC
Handling the Unexpected
Index
Home
249
Engine Does Not Start
QRG Checking the Engine
If the engine does not start, turn the ignition switch to START (e and check the starter.
2013 Fit
1Checking the Engine If you must start the vehicle immediately, use an assisting vehicle to jump start it. 2 Jump Starting P. 251
Starter condition
Checklist
Starter doesn't turn or turns Check brightness of the interior light.
over slowly.
Turn on interior lights and check brightness.
The battery may be dead. Check each of the items on the right and respond accordingly.
If the interior lights are dim or do not come on at all
2 Battery P. 231
If the interior lights come on normally 2 Inspecting and Changing Fuses P. 263
Handling the Unexpected
The starter turns over normally Review the engine start procedure.
but the engine doesn't start. Follow its instructions, and try to start the engine again. 2 Starting the Engine P. 161
There may be a problem with the Check the immobilizer system indicator.
fuse. Check each of the items on When the immobilizer system indicator is blinking, the engine cannot be started. the right and respond accordingly. 2 Immobilizer System P. 90
Check the fuel level.
There should be enough fuel in the tank. 2 Fuel Gauge P. 72
Check the fuse.
Check all fuses, or have the vehicle checked by a dealer.
TOC
2 Inspecting and Changing Fuses P. 263
If the problem continues:
2 Emergency Towing P. 264
Index
Home
250
Jump Starting
Jump Starting Procedure
Turn off the power to electric devices, such as audio and lights. Turn off the engine, then open the hood.
1. Connect the first jumper cable to your vehicle's battery + terminal. u Remove the cover from the under-hood fuse box.
2 Engine Compartment Fuse Box P. 260
Booster Battery
2. Connect the other end of the first jumper cable to the assisting vehicle's + terminal. u Use a 12-volt booster battery only.
3. Connect the second jumper cable to the assisting vehicle's - terminal.
4. Connect the other end of the second jumper cable to the grounding strap as shown. Do not connect this jumper cable to any other part.
5. If your vehicle is connected to another vehicle, start the assisting vehicle's engine and increase its rpm slightly.
6. Attempt to start your vehicle's engine. If it turns over slowly, check that the jumper cables have good metal-to-metal contact.
2013 Fit
1Jump Starting
3 WARNING
A battery can explode if you do not follow the correct procedure, seriously injuring anyone nearby.
Keep all sparks, open flames, and smoking materials away from the battery.
Securely attach the jumper cables clips so that they do not come off when the engine vibrates. Also be careful not to tangle the jumper cables or allow the cable ends to touch each other while attaching or detaching the jumper cables.
Battery performance degrades in cold conditions and may prevent the engine from starting.
Handling the Unexpected
QRG
TOC Index
Continued
Home
251
Handling the Unexpected
uuJump Startingu
QRG
What to Do After the Engine Starts
Once your vehicle's engine has started, remove the jumper cables in the following order. 1. Disconnect the jumper cable from your vehicle's ground. 2. Disconnect the other end of the jumper cable from the assisting vehicle's battery
- terminal. 3. Disconnect the jumper cable from your vehicle's battery + terminal. 4. Disconnect the other end of the jumper cable from the assisting vehicle's battery
+ terminal. Have your vehicle inspected by a nearby service station or a dealer.
TOC
Index Home
252
2013 Fit
Shift Lever Does Not Move
Automatic transmission models
Follow the procedure below if you cannot move the shift lever out of the (P position.
Releasing the Lock
Cover
Slot
1. Set the parking brake.
2. Remove the key from the ignition switch.
3. Wrap a cloth around the tip of a small flattip screwdriver and remove the cover of the shift lock release slot. u Put the tip of the flat-tip screwdriver into the slot and remove it as shown in the image.
Release Button
4. Insert the key into the shift lock release slot. 5. While pushing on the key, press the shift
lever release button and place the shift lever into (N. u The lock is now released. Have the shift
lever checked by a dealer as soon as possible.
Shift Lock Release Slot
2013 Fit
QRG
TOC Index Home
253
Handling the Unexpected
Overheating
QRG How to Handle Overheating
Overheating symptoms are as follows: · The high temperature indicator comes on or the engine suddenly loses power.
· Steam or spray comes out of the engine compartment.
First thing to do 1. Immediately park the vehicle in a safe place.
2. Turn off all accessories and turn on the hazard warning lights. u No steam or spray present: Keep the engine running and open the hood. u Steam or spray is present: Turn off the engine and wait until it subsides. Then open the hood.
2013 Fit
1How to Handle Overheating
3 WARNING
Steam and spray from an overheated engine can seriously scald you.
Do not open the hood if steam is coming out.
NOTICE Continuing to drive with the high temperature indicator on may damage the engine.
Handling the Unexpected
TOC
Index Home
254
Next thing to do
Reserve Tank
MAX MIN
uuOverheatinguHow to Handle Overheating
2013 Fit
QRG
1. Check that the cooling fan is operating and stop the engine once the high temperature
1How to Handle Overheating
3 WARNING
indicator goes off. u If the cooling fan is not operating,
immediately stop the engine.
Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you.
2. Once the engine has cooled down, inspect the coolant level and check the cooling system components for leaks. u If the coolant level in the reserve tank is low, add coolant until it reaches the MAX mark. u If there is no coolant in the reserve tank, check that the radiator is cool. Cover the radiator cap with a heavy cloth and open the cap. If necessary, add coolant up to the base of the filler neck, and put the cap back on.
Always let the engine and radiator cool down before removing the radiator cap.
If the coolant is leaking, contact a dealer for repairs.
Use water as an emergency/temporary measure only. Have a dealer flush the system with proper antifreeze as soon as possible.
Handling the Unexpected
Last thing to do Once the engine has cooled sufficiently, restart it and check the high temperature indicator.
If the high temperature indicator is off, resume driving. If it stays on, contact a dealer for repairs.
TOC Index
Home
255
Indicator, Coming On/Blinking
QRG If the Low Oil Pressure Indicator Comes On
Reasons for the indicator to come on Comes on when the engine oil pressure is low.
What to do as soon as the indicator comes on 1. Immediately park the vehicle in a safe place. 2. If necessary, turn the hazard warning lights on.
2013 Fit
1If the Low Oil Pressure Indicator Comes On NOTICE Running the engine with low oil pressure can cause serious mechanical damage almost immediately.
What to do after parking the vehicle 1. Stop the engine and let it sit for about one minute.
2. Open the hood and check the oil level. u Add oil as necessary.
3. Start the engine and check the low oil pressure indicator. u The light goes out: Start driving again. u The light does not go out within 10 seconds: Stop the engine and contact a dealer for repairs immediately.
Handling the Unexpected
If the Charging System Indicator Comes On
TOC
Reasons for the indicator to come on
Comes on when the battery is not being charged.
What to do when the indicator comes on Turn off the heating and cooling* system, rear defogger, and other electrical systems, and immediately contact a dealer for repairs.
Index
1If the Charging System Indicator Comes On
If you need to stop temporarily, do not turn off the engine. Restarting the engine may rapidly discharge the battery.
Home
256 * Not available on all models
uuIndicator, Coming On/BlinkinguIf the Malfunction Indicator Lamp Comes On or Blinks
If the Malfunction Indicator Lamp Comes on or Blinks
2013 Fit
1If the Malfunction Indicator Lamp Comes On or Blinks
QRG
Reasons for indicator lamp to come on or blink · Comes on when there is a problem with the engine emissions control
system, or the fuel fill cap is missing, or loose. · Blinks when engine misfiring is detected.
NOTICE If you drive with the malfunction indicator lamp on, the emissions control system and the engine could be damaged.
What to do when the indicator lamp comes on Avoid high speeds and immediately get your vehicle inspected at a dealer.
What to do when the indicator lamp blinks Park the vehicle in a safe place with no flammable items and wait at least ten minutes or more with the engine stopped until it cools.
If the malfunction indicator lamp blinks again when restarting the engine, drive to the nearest dealer at 31 mph (50 km/h) or less. Have your vehicle inspected.
Check/Tighten Fuel Cap Message
The message appears on when: An evaporative system leak is detected. This may be caused by the fuel fill cap being loose or not being installed.
Handling the Unexpected
What to do when the message appears:
1. Stop the engine.
2. Check that the fuel fill cap is fully installed.
TOC
u If not, loosen the cap, and then retighten it until it clicks at least once.
3. Drive for several days of normal driving.
u The message should go off.
When the malfunction indicator lamp comes on Malfunction indicator lamp comes on if the system continues to detect a leak of gasoline vapor. If this happens, check the fuel fill cap using the procedures described above.
Index
Home
257
uuIndicator, Coming On/BlinkinguIf the Brake System Indicator Comes On
QRG If the Brake System Indicator Comes On
U.S. Reasons for the indicator to come on · The brake fluid is low.
Canada
· There is a malfunction in the brake system.
What to do when the indicator comes on while driving Press the brake pedal lightly to check pedal pressure. · If normal, check the brake fluid level the next time you stop.
· If abnormal, take immediate action. If necessary, downshift the transmission to slow the vehicle using engine braking.
2013 Fit
1If the Brake System Indicator Comes On Have your vehicle repaired immediately. It is dangerous to drive with low brake fluid. If there is no resistance from the brake pedal, stop immediately in a safe place. If necessary downshift the gears.
If the brake system indicator and ABS indicator come on simultaneously, the electronic brake distribution system is not working. This can result in vehicle instability under sudden braking. Have your vehicle inspected by a dealer immediately.
Handling the Unexpected
If the EPS System Indicator Comes On
1If the EPS System Indicator Comes On
Reasons for the indicator to come on · Comes on when there is a problem with EPS system.
NOTICE If you repeatedly turn the steering wheel at an extremely low speed, or hold the steering wheel on
· If you depress the accelerator pedal repeatedly to increase the engine speed while the engine is idling, the indicator comes on, and sometimes the steering wheel becomes harder to operate.
the full left or right position for a while, the system heats up. The system goes into a protective mode, and limits its performance. The steering wheel becomes harder and harder to operate. Once the
TOC
What to do when the indicator comes on
Stop the vehicle in a safe place and restart the engine.
system cools down, EPS system is restored. Repeated operation under these conditions can eventually damage the system.
If the indicator comes on and stays on, immediately have your vehicle
inspected by a dealer.
Index
Home
258
uuIndicator, Coming On/BlinkinguIf the Low Tire Pressure Indicator Comes On
U.S. models
If the Low Tire Pressure Indicator Comes On
2013 Fit
QRG
Reasons for the indicator to come on
1If the Low Tire Pressure Indicator Comes On
A tire pressure is significantly low. If the compact spare tire* is installed, the indicator stays on for a while, and then goes off.
NOTICE Driving on an extremely underinflated tire can cause it to overheat. An overheated tire can fail. Always
What to do when the indicator comes on
inflate your tires to the prescribed level.
Stop your vehicle in a safe place. Check the tire pressure and adjust the
pressure to the specified level. The specified tire pressure is on a label on
the driver side doorjamb.
Handling the Unexpected
U.S. models
If the TPMS Indicator Comes On
Reasons for the indicator to come on · Comes on when there is a problem with the TPMS.
· If the compact spare is installed, the indicator comes on after driving for a few miles (kilometers).
What to do when the indicator comes on
Have the tire inspected by a dealer as soon as possible. If the compact
TOC
spare tire has triggered the indicator to comes on, change the tire to a
full size tire. The indicator goes off after a while.
* Not available on all models
Index
Home
259
Fuses
QRG Fuse Locations
If any electrical devices are not working, turn the ignition switch to LOCK (0 and check to see if any applicable fuse is blown.
Fuse locations are shown on the fuse box cover. Locate the fuse in question by the fuse number and box cover number.
Handling the Unexpected
Engine Compartment Fuse Box
Tab
Pull up the cover by pushing the three tabs as Tab shown.
Replacement of engine compartment fuses should be done by a dealer.
Tab
Circuit protected and fuse rating
Circuit Protected
Amps
1
Battery
100 A
2
EPS
70 A
3
Horn/Hazard
20 A
TOC
Fuse Box
Index
Home
260
2013 Fit
Interior Fuse Box
Fuse Lid
Located behind the fuse lid. Pull the fuse lid toward you.
Fuse Label
Fuse locations are shown on the label on the side panel. Locate the fuse in question by the fuse number and label number.
Circuit protected and fuse rating
Circuit Protected
Amps
1
Back Up
10 A
2
TPMS *
(7.5 A)
3 Driver's Power Window 20 A
4
-
-
5
Back Up Light
10 A
6
SRS
10 A
7
Transmission SOL*
(10 A)
8
SRS
7.5 A
9
Fog Light*
(20 A)
10
A/C *
7.5 A
11
ABS/VSA
7.5 A
12
ACG
10 A
13
ACC Socket
20 A
14
Key Lock/Radio
7.5 A
15 Daytime Running Light 7.5 A
16
Rear Wiper
10 A
17
Front Passenger's Power Window
20 A
18
Rear Passenger's Side Power Window
20 A
19
Rear Driver's Side Power Window
20 A
20
Fuel Pump
15 A
uuFusesuFuse Locations
2013 Fit
Circuit Protected
21
Washer
22
Meter
23
Hazard
24
Stop/Horn
25
-
26
LAF
27
Door Lock Main*
28
Headlight Main
29
Small Light
30
Main Fan Motor
31
-
32
Passenger's Side Headlight Low Beam
33
IG Coil
34
Driver's Side Headlight Low Beam
35
Door Lock*
36
Door Lock*
37
ABS/VSA FSR
38
Door Lock*
39
IGP
40
-
41
-
42
-
Amps 15 A 7.5 A 10 A 10 A
- 10 A (30 A) 20 A 10 A 30 A
-
10 A
15 A
10 A
(15 A) (15 A) 30 A (15 A) 15 A
- - -
Handling the Unexpected
QRG
TOC Index
* Not available on all models
Home
261
uuFusesuFuse Locations
Handling the Unexpected
QRG
TOC Index
Circuit Protected
43
MG Clutch
44
STS
45
-
46
-
47
Sub Fan Motor
48
Driver's Side Headlight High Beam
49
Door Lock*
50
Door Lock*
51
Passenger's Side Headlight High Beam
52
DBW
53
-
54
Rear Defogger*
55
Heated Mirror*
56
Front Wiper
57
Blower Motor
58
ABS/VSA Motor
59
Rear Defogger
60 IG Main/Option Main
61
Radio
62
-
Amps (7.5 A) 7.5 A
- - (30 A)
10 A
(15 A) (15 A)
10 A
15 A -
20 A 10 A 30 A 30 A 30 A 20 A 30 A 50 A/ 40 A 30 A
-
Home
262 * Not available on all models
2013 Fit
uuFusesuInspecting and Changing Fuses
Inspecting and Changing Fuses
2013 Fit
QRG
Fuse
1. Turn the ignition switch to LOCK (0. Turn 1Inspecting and Changing Fuses
headlights and all accessories off.
NOTICE
2. Check the fuses in the engine compartment. u If the fuse is blown, have it replaced by a
Replacing a fuse with one that has a higher rating greatly increases the chances of damaging the electrical system.
Blown
dealer. 3. Inspect the small fuses in the engine
Replace fuse with a spare fuse of the same specified amperage. Confirm the specified amperage using the charts on P. 260 and P. 261.
Fuse Puller
compartment and the vehicle interior. u If there is a burned out fuse, remove it
There is a fuse puller on the back of the engine compartment fuse box cover.
with the fuse puller and replace it with a
new one.
Handling the Unexpected
TOC
Index Home
263
Emergency Towing
QRG Call a professional towing service if you need to tow your vehicle.
Flat bed equipment The operator loads your vehicle on the back of a truck. This is the best way to transport your vehicle.
2013 Fit
1Emergency Towing NOTICE Trying to lift or tow your vehicle by the bumpers will cause serious damage. The bumpers are not designed to support the vehicle's weight.
Wheel lift equipment The tow truck uses two pivoting arms that go under the front tires and lift them off the ground. The rear tires remain on the ground. This is an acceptable way to tow your vehicle.
NOTICE Improper towing such as towing behind a motorhome or other motor vehicle can damage the transmission.
Never tow your vehicle with just a rope or chain. It is very dangerous, since ropes or chains may shift from side to side or break.
Handling the Unexpected
TOC
Index Home
264
uuEmergency Towingu
Towing Hook
For very short distances, such as freeing the vehicle, you can use the detachable towing hook that mounts on the anchors in the front and rear bumpers.
Cover
1. Put cloth on the edge of the cover. Carefully pry with a small flat-tip screwdriver or a metal fingernail file to remove the cover.
2. Take the towing hook and the jack handle bar out of the tool bag in the cargo area.
Towing Hook
3. Screw the towing hook into the hole, and tighten it with the jack handle bar.
2013 Fit
1Towing Hook
NOTICE To avoid damage to your vehicle, use the towing hook for straight, flat ground towing only. Do not tow at an angle. This hook should not be used to tow the vehicle onto a flat bed. Do not use it as a tie down.
Make sure to use the properly-designed and attached towing equipment.
NOTICE Do not slip the clutch for a long time to get unstuck. This may overheat and damage the transmission.
QRG
Handling the Unexpected
Jack Handle Bar
Continued
TOC
Index Home
265
uuEmergency Towingu
QRG
Models without tailgate key cylinder
When You Cannot Open the Tailgate
If you cannot open the tailgate use the following procedure. 1. Use a flat-tip screwdriver and remove the cover on the back of the tailgate.
2013 Fit
1When You Cannot Open or Close the Tailgate What to do-Following up After taking these steps, contact a dealer to have the vehicle checked.
When you open the tailgate from inside, make sure there is enough space around the tailgate, and it does not hit anyone or any object.
Cover
Lock Unlock
2. To open the tailgate, push the tailgate while pushing the lever to the unlocking direction.
Handling the Unexpected
TOC Lever
Index
Home
266
2013 Fit
QRG
Information
This chapter includes your vehicle's specifications, locations of identification numbers, and other information required by regulation.
Specifications .................................... 268 Identification Numbers
Vehicle Identification Number (VIN).. 270 Engine Number and Transmission
Number...................................... 270 Devices that Emit Radio Waves ....... 271 Reporting Safety Defects ................. 272
Emissions Testing Testing of Readiness Codes.............. 273
Warranty Coverages ........................ 275 Authorized Manuals......................... 277 Customer Service Information......... 278
Index
Home
267
Specifications
QRG
Vehicle Specifications
Model No. of Passengers:
Honda Fit
Front
2
Rear
3
Total
5
Weights:
Gross Vehicle Weight Rating
U.S.: 3,512 lbs (1,594 kg) Canada: 1,594 kg
Gross Axle Weight Rating (Front)
U.S.: 1,921 lbs (872 kg) Canada: 872 kg
Gross Axle Weight Rating (Rear)
U.S.: 1,619 lbs (735 kg) Canada: 735 kg
Air Conditioning:
Refrigerant Type Charge Quantity
HFC-134a (R-134a) 13.1 14.8 oz (370 420 g)
Lubricant Type
SP-10
2013 Fit
Engine Specifications
Displacement
91.3 cu-in (1,497 cm3)
Spark Plugs
NGK DENSO
IZFR6K13 SKJ20DR-M13
Fuel
Fuel:
Unleaded gasoline, Pump octane number
Type
of 87 or higher
Fuel Tank Capacity 10.6 US gal (40 )
Battery
Capacity/Type
32AH(5)/40AH(20) 34AH(5)/40AH(20)
Washer Fluid
Tank Capacity
U.S.: 2.6 US qt (2.5 ) Canada: 4.8 US qt (4.5 )
Light Bulbs
Headlights (High/Low Beam) Fog Lights*1 Parking/Side Marker Lights Front Turn Signal Lights Brake/Taillights Back-Up Lights Rear Turn Signal Lights High-Mount Brake Light Rear License Plate Light Cargo Area Light Center Console Light*2 Interior Lights
Map Lights*2 Ceiling Light
*1: Sport models *2: Not available on all models
60/55W (HB2) 55W (H11) 3.8W (Amber) 21W (Amber) 21/5W 16W 21W (Amber) LED 5W 5W 1.4W
8W 8W
Information
TOC
Index Home
268
Brake/Clutch Fluid
Specified
Honda Heavy Duty Brake Fluid DOT 3
Automatic Transmission Fluid
Specified
Honda ATF DW-1 (automatic transmission fluid)
Capacity
Change
2.6 US qt (2.5 )
Manual Transmission Fluid
Specified
Honda Manual Transmission Fluid
Capacity
Change
1.6 US qt (1.5 )
Engine Oil
Recommended Capacity
·Genuine Honda Motor Oil 0W-20 ·API Premium-grade 0W-20 detergent oil Change 3.6 US qt (3.4 ) Change including 3.8 US qt (3.6 ) filter
Engine Coolant
Specified Ratio
Capacity
Honda Long-Life Antifreeze/Coolant Type2 50/50 with distilled water 1.18 US gal (4.47 ) *1 (change including the remaining 0.116 US gal (0.44 ) in the reserve tank) 1.15 US gal (4.37 )*2 (change including the remaining 0.116 US gal (0.44 ) in the reserve tank)
*1: Automatic transmission models *2: Manual transmission models
uu Specifications u
2013 Fit
Tire
Regular
Compact Spare
Size
Pressure psi (kPa[kgf/cm2]) Size Pressure psi (kPa[kgf/cm2])
Wheel Size Regular Compact Spare
175/65R15 84S*1 185/55R16 83H*2 32 (220 [2.2])*1 33 (230 [2.3])*2 T135/80D15 99M*3
60 (420 [4.2])*3
15 x 5 1/2J*1 16 x 6J*2 15 x 4T*3
*1: All models except Sport models *2: Sport models *3: U.S. models and Canadian manual transmission models
QRG
Information
TOC
Index Home
269
Identification Numbers
QRG Vehicle Identification Number (VIN)
Your vehicle has a 17-digit vehicle identification number (VIN) used to register your vehicle for warranty purposes, and for licensing and insuring your vehicle. See the image below for the VIN locations.
Engine Number and Transmission Number
See the image below for the locations of your vehicle's engine number and transmission number.
Vehicle Identification Number
Engine Number
Information
Manual Transmission Number Automatic Transmission Number
TOC
Index
Home
270
Certification Label
2013 Fit
Devices that Emit Radio Waves
The following products and systems on your vehicle emit radio waves when in operation.
Audio System Bluetooth® HandsFreeLink®
Remote Transmitter
U.S. models
Bluetooth® Audio Immobilizer System
U.S. models
Tire Pressure Monitoring System (TPMS)
Each of the above complies with the appropriate requirements or the required standards of FCC (Federal Communications Commission) and Industry Canada Standard, described below:
As required by the FCC: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Industry Canada Standard RSS-Gen/210/310. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
2013 Fit
QRG
TOC Index Home
271
Information
Reporting Safety Defects
QRG In the U.S. If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying American Honda Motor Co., Inc.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or American Honda Motor Co., Inc.
To contact NHTSA: Call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153) Go to http://www.safercar.gov Write to: Administrator, NHTSA, 1200 New Jersey Avenue, SE., Washington, DC 20590.
You can also obtain other information about moto r vehicle safety from http://www.safercar.gov.
Information
In Canada If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform Honda Canada Inc. and you may also inform Transport Canada.
If Transport Canada receives similar complaints, it may open an investigation, and if it finds that a safety
defect exists in a group of vehicles, it may lead to a recall and remedy campaign. However, Transport Canada TOC cannot become involved in individual problems between you, your dealer, or Honda Canada Inc.
Index Home
To contact Transport Canada's Defect Investigations and Recalls Division, you may call 1-800-333-0510.
For more information on reporting safety defects or about motor vehicle safety, go to http://www.tc.gc.ca/roadsafety.
272
2013 Fit
Emissions Testing
Testing of Readiness Codes
2013 Fit
QRG
Your vehicle uses "readiness codes," as part of its onboard self diagnostic system. 1Testing of Readiness Codes
Some states refer to these codes during testing to see if your vehicle's emissions components are working properly. The codes may not be read if you go through the testing just after the battery has
The readiness codes are erased when the battery is disconnected, and set again only after several days of driving under a variety of conditions.
gone dead or been disconnected.
To check if they are set, turn the ignition switch to ON (w, without starting the engine. The malfunction indicator lamp will come on for several seconds. If it then
If a testing facility determines that the readiness codes are not set, you may be requested to return at a later date to complete the test.
goes off, the readiness codes are set. If it blinks five times, the readiness codes are
If the testing facility determines the readiness codes
not set.
are still not set, see a dealer.
If you are required to have your vehicle tested before the readiness codes are ready, prepare the vehicle for retesting by doing the following:
Information
1. Fill the gas tank to approximately 3/4 full.
2. Park the vehicle and leave the engine off for 6 hours or more.
3. Make sure the ambient temperature is between 40°F and 95°F (4°C and 35°C).
4. Start the engine without touching the accelerator pedal, and let it idle for 20 seconds.
5. Keep the vehicle in (P (automatic transmission) or (N (manual transmission). Increase the engine speed to 2,000 rpm, and hold it there for about 3 minutes. TOC
6. Let the engine idle with your foot off the accelerator for 20 seconds.
Index
Continued
Home
273
Information
uuEmissions TestinguTesting of Readiness Codes
QRG 7. Select a nearby, lightly traveled major highway where you can maintain a speed of 50 to 60 mph (80 to 97 km/h) for at least 20 minutes. Drive on the highway in (D (automatic) or 5th (manual). Do not use cruise control. When traffic allows, drive for 90 seconds without moving the accelerator pedal. (Vehicle speed may vary slightly; this is okay.) If you cannot do this for a continuous 90 seconds because of traffic conditions, drive for at least 30 seconds, then repeat it two more times (for a total of 90 seconds). 8. Drive in city/suburban traffic for at least 10 minutes. When traffic conditions allow, let the vehicle coast for several seconds without using the accelerator pedal or the brake pedal. 9. Park the vehicle and leave the engine off for 30 minutes.
TOC
Index
Home
274
2013 Fit
Warranty Coverages
U.S. Owners Your new vehicle is covered by these warranties:
New Vehicle Limited Warranty covers your new vehicle, except for the emissions control systems and accessories, against defects in materials and workmanship.
Emissions Control Systems Defects Warranty and Emissions Performance Warranty these two warranties cover your vehicle's emissions control systems. Time, mileage, and coverage are conditional. Please read your warranty booklet for exact information.
Seat Belt Limited Warranty a seat belt that fails to function properly is covered by a limited warranty. Please read your warranty booklet for details.
Rust Perforation Limited Warranty all exterior body panels are covered for rust-through from the inside for the specified time period with no mileage limit.
Accessory Limited Warranty Honda accessories are covered under this warranty. Time and mileage limits depend on the type of accessory and other factors. Please read your warranty booklet for details.
Replacement Parts Limited Warranty covers all Honda replacement parts against defects in materials and workmanship.
Continued
2013 Fit
QRG
TOC Index Home
275
Information
Information
uuWarranty Coveragesu
QRG Replacement Battery Limited Warranty provides prorated coverage for a replacement battery purchased from a dealer. Replacement Muffler Lifetime Limited Warranty provides coverage for as long as the purchaser of the muffler owns the vehicle. Restrictions and exclusions apply to all these warranties. Please read the 2013 Honda warranty information booklet that came with your vehicle for precise information on warranty coverages. Your vehicle's original tires are covered by their manufacturer. Tire warranty information is in a separate booklet.
Canadian Owners Please refer to the 2013 warranty manual that came with your vehicle.
TOC
Index Home
276
2013 Fit
Authorized Manuals
Service Express For electronic copies of service publications, you can purchase a subscription to Service Express. Visit www.techinfo.honda.com for pricing and options.
For U.S. Owners: The publications listed below can be purchased from Helm Incorporated. You can order a manual by phone at (800) 782-4356 (credit card orders only), or online at www.helminc.com.
Make an inquiry to Helm Inc. at (800) 782-4356 if you are interested in ordering other models' or other years' manuals.
Publication Form Number
61TK603 61TK604
61TK603EL
61TK630 31TK6640 31TK6840 31TK6M40 31TK6W40 31TK6Q40
HON-R
Form Description
2009-2012 Honda Fit Service Manual 2013 Honda Fit Service Manual 2012-2013 Honda Fit
Electrical Troubleshooting Manual 2009 Honda Fit Body Repair Manual
2013 Honda Fit Owner's Manual 2013 Honda Fit Navigation System Owner's Manual
2013 Honda Fit Honda Service History 2013 Honda Fit Warranty Booklet
2013 Honda Fit Technology Reference Guide Order Form for Previous YearsIndicate Year and Model Desired
2013 Fit
1Authorized Manuals Service Manual: Covers maintenance and recommended procedures for repair to engine and chassis components. It is written for the journeyman technician, but it is simple enough for most mechanically inclined owners to understand.
QRG
Electrical Troubleshooting Manual: Complements the Service Manual by providing indepth troubleshooting information for each electrical circuit in your vehicle.
Body Repair Manual: Describes the procedures involved in the replacement of damaged body parts.
For Canadian Owners: Si vous avez besoin d'un Manuel du Conducteur en français, veuillez demander à votre concessionnaire de commander le numéro de pièce 33TK6C40
Information
TOC Index
Home
277
Customer Service Information
2013 Fit
QRG Honda dealership personnel are trained professionals.
1Customer Service Information
They should be able to answer all your questions. If you encounter a problem that your dealership does not solve to your satisfaction, please discuss it with the dealership's service manager or general manager. If you are dissatisfied with the decision made by the dealership's management, contact Honda Customer Services.
U.S. Owners: American Honda Motor Co., Inc. Honda Automobile Customer Services Mail Stop 500-2N-7A 1919 Torrance Blvd. Torrance, CA 90501-2746 Tel: (800) 999-1009
Canadian Owners: Honda Canada Inc. Customer Relations 180 Honda Boulevard Markham, ON L6C 0H9 Tel: 1-888-9-HONDA-9 Fax: 1-877-939-0909 E-mail: Honda_cr@ch.honda.com
When you call or write, please give us the following
information:
· Vehicle Identification Number
2 Vehicle Identification Number (VIN) P. 270
· Date of purchase · Odometer reading of your vehicle · Your name, address, and telephone number · A detailed description of the problem · Name of the dealer who sold the vehicle to you
Information
In Puerto Rico and the U.S. Virgin Islands: Bella International P.O. Box 190816 San Juan, PR 00919-0816 TOC Tel: (787) 620-7546
Index
Home
278
INDEX A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Index
A
ABS (Anti-lock Brake System).................. 183 Accessories and Modifications ................ 190 Accessory Power Socket........................... 115 Active Head Restraints............................. 107 Additives
Coolant .................................................. 206 Engine Oil ............................................... 201 Washer ................................................... 211 Additives, Engine Oil ............................... 201 Adjusting Armrest .................................................. 110 Front Seats.............................................. 103 Head Restraints....................................... 105 Headlights .............................................. 212 Mirrors.................................................... 102 Rear Seats............................................... 108 Steering Wheel ....................................... 101 Air Conditioning System (Heating and Cooling System) ................ 118 Cooling................................................... 120 Defrosting the Windshield and Windows ................................................ 120 Dust and Pollen Filter .............................. 233 Heating................................................... 119 Air Pressure ...................................... 223, 269 Airbags ....................................................... 34 Advanced Airbags..................................... 40 After a Collision ........................................ 38 Airbag Care .............................................. 48 Event Data Recorder ................................. 19
Front Airbags (SRS) .................................... 37 Indicator ........................................ 45, 67, 69 Passenger Airbag Off Indicator .................. 46 Sensors...................................................... 34 Side Airbag Cutoff System ......................... 43 Side Airbag Off Indicator ........................... 47 Side Airbags .............................................. 41 Side Curtain Airbags .................................. 44 Anti-lock Brake System (ABS) .................. 183 Indicator .................................................... 67 Armrest ..................................................... 110 Audio System ............................................ 122 Adjusting the Sound ................................ 126 Auxiliary Input Jack .................................. 123 Error Messages ........................................ 135 General Information ................................ 137 MP3/WMA/AAC ...................................... 133 Recommended CDs ................................. 137 Recommended Devices ............................ 139 Remote Controls ......................................... 3 Security Code .......................................... 124 Theft Protection....................................... 124 USB Adapter Cable .................................. 123 USB Flash Drives ...................................... 139 Authorized Manuals................................. 277 Auto Door Locking/Unlocking ................... 84 Customize ................................................. 85 Automatic Transmission ........................... 164 Creeping ................................................. 164 Fluid ........................................................ 208 Kickdown ................................................ 164
2013 Fit
Operating the Shift Lever........... 13, 166, 168 Sequential Shift Mode ............................. 169 Shift Lever Does Not Move ...................... 253 Shifting ........................................... 165, 167 Auxiliary Input Jack.................................. 123 Average Fuel Economy .............................. 74
B
Battery ...................................................... 231 Charging System Indicator................. 65, 256 Jump Starting.......................................... 251 Maintenance (Checking the Battery)........ 231 Maintenance (Replacing) ......................... 232
Belts (Seat) .................................................. 26 Beverage Holders ..................................... 114 Bluetooth® HandsFreeLink®..................... 140 Booster Seats (For Children) ...................... 60 Brake System ............................................ 181
Anti-lock Brake System (ABS)................... 183 Brake Assist System ................................. 184 Fluid........................................................ 210 Foot Brake............................................... 182 Indicator............................................ 64, 258 Parking Brake .......................................... 181 Brightness Control (Instrument Panel)...... 99 Bulb Replacement .................................... 212 Brake Light, Taillight, Back-Up Light and
Rear Turn Signal Lights .......................... 216 Fog Lights ............................................... 214 Headlights............................................... 212
QRG
Index Home
279
INDEX A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
QRG
High-Mount Brake Light .......................... 217 Rear License Plate Light............................ 217 Bulb Specifications.................................... 268
C
Index Home
Carbon Monoxide Gas................................ 61 Cargo Floor Box ........................................ 115 Cargo Hooks.............................................. 117 Carrying Cargo.................................. 155, 157 CD Player ................................................... 129 Certification Label .................................... 270 Changing Bulbs......................................... 212 Charging System Indicator ................. 65, 256 Child Safety ................................................. 49
Childproof Door Locks ............................... 83 Child Seat .................................................... 49
Booster Seats............................................. 60 Child Seat for Infants ................................. 51 Child Seat for Small Children ..................... 52 Installing a Child Seat with a Lap/
Shoulder Seat Belt.................................... 56 Larger Children.......................................... 59 Rear-facing Child Seat ............................... 51 Selecting a Child Seat ................................ 53 Childproof Door Locks................................ 83 Cleaning the Exterior ............................... 235 Cleaning the Interior ................................ 234 Clock ............................................................ 76 Clutch Fluid ............................................... 210 Coat Hook ................................................. 116
Compact Spare Tire .......................... 239, 269 Controls....................................................... 75 Coolant (Engine) ...................................... 206
Adding to the Radiator............................ 207 Adding to the Reserve Tank..................... 206 High Temperature Indicator....................... 67 Low Temperature Indicator........................ 67 Overheating ............................................ 254 Creeping (Automatic Transmission) ........ 164 Cruise Control........................................... 173 Indicator.................................................... 71 Cup Holders .............................................. 114 Customer Service Information................. 278
D
Daytime Running Lights ............................ 96 Dead Battery............................................. 251 Defrosting the Windshield and
Windows ................................................. 120 Devices that Emit Radio Waves ............... 271 Dimming
Headlights................................................. 95 Rearview Mirror....................................... 102 Dipstick (Engine Oil)................................. 202 Directional Signals (Turn Signal) ............... 95 Door Mirrors ............................................. 102 Doors........................................................... 77 Auto Door Locking .................................... 84 Auto Door Unlocking ................................ 84 Door and Tailgate Open Indicator........ 25, 68
2013 Fit
Keys.......................................................... 77 Locking/
Unlocking the Doors from the Inside ....... 82 Locking/
Unlocking the Doors from the Outside .... 79 Lockout Prevention System ....................... 81 DOT Tire Quality Grading........................ 225 Driving ...................................................... 153 Automatic Transmission .......................... 164 Braking ................................................... 181 Cruise Control ........................................ 173 Shifting Gear .......................... 165, 167, 171 Starting the Engine ................................. 161 Dust and Pollen Filter .............................. 233
E
Electric Power Steering (EPS) System Indicator ........................................... 68, 258
Electronic Stability Control (ESC) ............ 176 Emergency................................................ 264 Emissions Testing (Readiness Codes) ...... 273 Engine....................................................... 270
Coolant .................................................. 206 Jump Starting ......................................... 251 Oil .......................................................... 201 Starting................................................... 161 Switch Buzzer ........................................... 94 Engine Coolant ........................................ 206 Adding to the Radiator ........................... 207 Adding to the Reserve Tank .................... 206
280
INDEX A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
High Temperature Indicator ...................... 67 Low Temperature Indicator ....................... 67 Overheating............................................ 254 Engine Oil................................................. 201 Adding ................................................... 203 Checking ................................................ 202 Displaying Oil Life ................................... 195 Low Oil Pressure Indicator ................. 64, 256 Recommended Engine Oil ....................... 201 EPS (Electric Power Steering) System....... 68, 258 Exhaust Gas Hazard (Carbon Monoxide).................................. 61 Exterior Care (Cleaning) .......................... 235 Exterior Mirrors........................................ 102
F
Features .................................................... 121 Filters
Dust and Pollen....................................... 233 Oil .......................................................... 204 Flat Tire..................................................... 239 Floor Mats ................................................ 234 Fluids Automatic Transmission .......................... 208 Brake/Clutch ........................................... 210 Engine Coolant ....................................... 206 Manual Transmission .............................. 209 Windshield Washer ................................. 211 FM/AM Radio ........................................... 127
Fog Light Indicator ..................................... 70 Folding Down the Rear Seats .................. 108 Foot Brake................................................. 182 Front Airbags (SRS) ..................................... 37 Front Seats ................................................ 103
Adjusting................................................. 103 Fuel ...................................................... 14, 186
Economy ................................................. 189 Gauge ....................................................... 72 Low Fuel Indicator ..................................... 66 Recommendation .................................... 186 Refueling ................................................. 186 Fuel Economy............................................ 189 Fuel Fill Cap................................................. 14 Message .................................................. 257 Fuel Fill Door............................................... 14 Fuses .......................................................... 260 Inspecting and Changing ......................... 263 Locations ................................................. 260
G
Gasoline (Fuel) Economy ................................................. 189 Gauge ....................................................... 72 Information ............................................. 186 Low Fuel Indicator ..................................... 66 Refueling ................................................. 186
Gauges ........................................................ 72 Gear Shift Lever Positions
Automatic Transmission................... 165, 167
2013 Fit
Manual Transmission............................... 172 Glass (care)................................................ 236 Glove Box.................................................. 113
H
Halogen Bulbs .................................. 212, 214 Handling the Unexpected........................ 237 HandsFreeLink® (HFL)............................... 140
Change Language ................................... 151 Help Features .......................................... 141 Making a Call.......................................... 146 Menus..................................................... 142 Muting a Call .......................................... 147 Phone Setup............................................ 144 Phonebook.............................................. 148 Receiving a Call ....................................... 147 Sending Numbers or Names During a Call ......................................................... 147 Transferring a Call ................................... 147 Hazard Warning Button .............................. 2 Head Restraints ........................................ 105 Headlights................................................... 95 Aiming .................................................... 212 Dimming ............................................. 95, 96 Operating.................................................. 95 Heated Door Mirrors................................ 100 Heating and Cooling System ................... 118 Cooling ................................................... 120 Defrosting the Windshield and
Windows............................................... 120
QRG
Index Home
281
INDEX A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
QRG
Dust and Pollen Filter ............................... 233 Heating ................................................... 119 HFL (HandsFreeLink®) ............................... 140 High-Beam Indicator .................................. 70
Index Home
I
Identification Numbers ............................ 270 Engine and Transmission.......................... 270 Vehicle Identification ............................... 270
Ignition Switch............................................ 94 Illumination Control ................................... 99
Knob ......................................................... 99 Immobilizer System .................................... 90
Indicator .................................................... 70 Indicators..................................................... 64
ABS (Anti-lock Brake System) ..................... 67 Charging System ............................... 65, 256 CRUISE CONTROL.............................. 71, 174 CRUISE MAIN .................................... 71, 173 Daytime Running Lights ............................. 71 Door and Tailgate Open....................... 25, 68 EPS (Electric Power Steering)
System............................................. 68, 258 Fog Light ................................................... 70 High Temperature...................................... 67 High-Beam ................................................ 70 Immobilizer System.................................... 70 Lights On................................................... 70 Low Fuel.................................................... 66 Low Oil Pressure ................................ 64, 256
282
Low Temperature ...................................... 67 Low Tire Pressure .............................. 69, 178 Maintenance MinderTM ...................... 71, 195 Malfunction Indicator Lamp............... 65, 257 Parking Brake and Brake System........ 64, 258 Seat Belt Reminder .............................. 27, 66 Security System Alarm ............................... 71 Shift Position ............................................. 65 Side Airbag Off ................................... 47, 69 Supplemental Restraint System............ 45, 67 TPMS ................................................ 69, 180 Transmission ............................................. 66 Turn Signal................................................ 70 VSA® (Vehicle Stability Assist) System........ 68, 176 VSA® OFF .......................................... 68, 177 Washer Level............................................. 71 Information .............................................. 267 Information Display ................................... 73 Instrument Panel ........................................ 63 Brightness Control..................................... 99 Interior Lights ........................................... 111 Interior Rearview Mirror.......................... 102
J
Jack (Wheel Nut Wrench) ................ 238, 242 Jump Starting ........................................... 251
2013 Fit
K
Keyless Lockout Prevention....................... 81 Keys............................................................. 77
Lockout Prevention ................................... 81 Rear Door Won't Open ............................. 83 Remote Transmitter .................................. 79 Types and Functions.................................. 77 Won't Turn ............................................... 17 Kickdown (Automatic Transmission) ...... 164
L
LATCH (Child Seats) ................................... 54 Lights .................................................. 95, 212
Bulb Replacement ................................... 212 Daytime Running Lights ............................ 96 Fog Lights ................................................. 96 High-Beam Indicator ................................. 70 Interior.................................................... 111 Light Switches........................................... 95 Lights On Indicator.................................... 70 Turn Signals .............................................. 95 Load Limits ............................................... 157 Locking/Unlocking ..................................... 77 Auto Door Locking/Unlocking ................... 84 Childproof Door Locks .............................. 83 From Inside ............................................... 82 From Outside ............................................ 79 Keys.......................................................... 77 Lockout Prevention System ....................... 81 Using a Key............................................... 80
INDEX A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Lockout Prevention System ....................... 81 Low Battery Charge ................................. 256 Low Fuel Indicator ..................................... 66 Low Oil Pressure Indicator................. 64, 256 Lower Anchors ........................................... 54 Lubricant Specifications Chart ................ 269 Luggage (Maximum Load Limit) ............. 157
M
Maintenance ............................................ 191 Battery.................................................... 231 Brake/Clutch Fluid................................... 210 Cleaning ................................................. 234 Coolant .................................................. 206 Heating and Cooling System ................... 233 Maintenance MinderTM............................ 195 Oil .......................................................... 202 Precautions ............................................. 192 Radiator.................................................. 207 Remote Transmitter ................................ 232 Replacing Light Bulbs .............................. 212 Safety ..................................................... 193 Service Items........................................... 197 Tires........................................................ 222 Transmission Fluid................................... 208 Under the Hood...................................... 199
Malfunction Indicator Lamp ............. 65, 257 Manual Transmission ............................... 171 Map Lights................................................ 111 Maximum Load Limit............................... 157
Meters, Gauges ........................................... 72 Mirrors....................................................... 102
Adjusting................................................. 102 Door........................................................ 102 Exterior.................................................... 102 Interior Rearview ..................................... 102 Modifications (and Accessories) .............. 190 MP3 ................................................... 129, 133
N
Numbers (Identification) .......................... 270
O
Odometer.................................................... 73 Oil (Engine) ............................................... 201
Adding .................................................... 203 Checking ................................................. 202 Displaying Oil Life .................................... 195 Low Oil Pressure Indicator.................. 64, 256 Recommended Engine Oil........................ 201 Viscosity .................................................. 201 Opening/Closing Hood ....................................................... 200 Power Windows ........................................ 92 Tailgate ..................................................... 88 Overheating .............................................. 254
2013 Fit
P
Paddle Shifters (Sequential Shift Mode)..................... 13, 169 Panic Mode ................................................. 91 Parking...................................................... 185 Parking Brake ........................................... 181 Parking Brake and Brake System Indicator............................................ 64, 258 Passenger Airbag Off Indicator ................. 46 Passing Indicators ....................................... 95 Precautions While Driving ....................... 163
Rain ........................................................ 163 Pregnant Women ....................................... 32 Puncture (Tire).................................. 239, 245
QRG
R
Radiator .................................................... 207 Radio (FM/AM) ......................................... 127 Radio Data System (RDS) ......................... 128 RDS (Radio Data System) ......................... 128 Readiness Codes (Emissions Testing)....... 273 Rear Defogger/Heated Door Mirror Button ..................................................... 100 Rear Seats (Folding Down) ...................... 108 Rearview Mirror ....................................... 102 Refueling .................................................. 186
Fuel Gauge................................................ 72 Gasoline.......................................... 186, 268 Low Fuel Indicator ..................................... 66 Regulations............................... 179, 225, 271
Index
Home
283
INDEX A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
QRG
Index Home
Remote Transmitter.................................... 79 Replacement
Battery..................................................... 232 Bulbs ....................................................... 212 Fuses ............................................... 260, 261 Tires ........................................................ 228 Wiper Blade Rubber......................... 218, 220 Reporting Safety Defects ......................... 272 Resetting a Trip Meter ............................... 73
S
Safe Driving................................................. 21 Safety Check................................................ 25 Safety Labels ............................................... 62 Safety Message ........................................... 20 Seat Belts..................................................... 26
Adjusting the Shoulder Anchor .................. 30 Automatic Seat Belt Tensioners.................. 28 Checking ................................................... 33 Detachable Anchor .................................... 31 Fastening................................................... 29 Installing a Child Seat with a Lap/
Shoulder Seat Belt.................................... 56 Pregnant Women ...................................... 32 Reminder................................................... 27 Warning Indicator................................ 27, 66 Seats .......................................................... 103 Adjusting................................................. 103 Front Seats .............................................. 103 Rear Seats................................................ 108
Seat Under Box ....................................... 116 Security System........................................... 90
Immobilizer System Indicator ..................... 70 Security System Alarm Indicator................. 71 Select Lever................................. 13, 165, 171 Operation.......................... 13, 166, 167, 168 Releasing................................................. 253 Won't Move............................................ 253 Select/Reset Knob....................................... 73 Selecting a Child Seat................................. 53 Selector Knob (Audio).............................. 125 Sequential Shift Mode ............................. 169 Setting the Clock ........................................ 76 Shift Lever........................... 13, 165, 167, 171 Shift Position Indicator .............. 65, 166, 168 Shifting (Transmission)............. 165, 167, 171 Shoulder Anchor ........................................ 30 Side Airbags................................................ 41 Cutoff System ........................................... 43 Off Indicator.............................................. 43 Side Curtain Airbags .................................. 44 Snow Tires................................................. 230 Spare Tire.......................................... 239, 269 Spark Plugs ............................................... 268 Specifications............................................ 268 Specified Fuel ................................... 186, 268 Speedometer .............................................. 72 SRS Airbags (Airbags)................................. 37 Starting the Engine .................................. 161 Does Not Start......................................... 250 Engine Switch Buzzer ................................ 94
2013 Fit
Jump Starting ......................................... 251 Steering Wheel ........................................ 101
Adjusting ................................................ 101 Stopping ................................................... 185 Summer Tires............................................ 230 Supplemental Restraint System (SRS) ....... 37 Switches
(Around the Steering Wheel) .......... 2, 3, 94
T
Tachometer ................................................ 72 Tailgate....................................................... 88
Unable to Open ...................................... 266 Temperature
High Temperature Indicator ...................... 67 Low Temperature Indicator ....................... 67 Time (Setting)............................................. 76 Tire Pressure Monitoring System (TPMS)..................................................... 178 Indicator ........................................... 69, 259 Tire Repair Kit .......................................... 245 Tires .......................................................... 222 Air Pressure..................................... 223, 269 Checking and Maintaining ...................... 222 Inspection ............................................... 222 Labeling.................................................. 223 Puncture (Flat Tire) .................................. 239 Regulations............................................. 225 Rotation.................................................. 229 Spare Tire ....................................... 239, 269
284
INDEX A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Summer.................................................. 230 Tire Chains.............................................. 230 Wear Indicators....................................... 227 Winter .................................................... 230 Tools ......................................................... 238 Towing a Trailer....................................... 159 Towing Your Vehicle Emergency.............................................. 264 TPMS (Tire Pressure Monitoring System).......... 178 Indicator ........................................... 69, 259 Transmission............................. 165, 167, 171 Automatic............................................... 164 Fluid ............................................... 208, 209 Manual ................................................... 171 Number .................................................. 270 Sequential Shift Mode............................. 169 Shift Position Indicator .............. 65, 166, 168 Trip Meter .................................................. 73 Troubleshooting ...................................... 237 Blown Fuse ..................................... 260, 261 Brake Pedal Vibrates ................................. 17 Buzzer Sounds When Opening Door ......... 18 Emergency Towing ................................. 264 Engine Won't Start ................................. 250 Noise When Braking ................................. 18 Overheating............................................ 254 Puncture/Flat Tire ............................ 239, 245 Rear Door Won't Open ....................... 17, 83 Select Lever Won't Move ........................ 253 Warning Indicators.................................... 64
Turn Signals ................................................ 95 Indicators (Instrument Panel)...................... 70
U
Unlocking the Doors ............................ 79, 82 USB Adapter Cable ........................... 122, 123 USB Flash Drives........................................ 139
V
Vanity Mirrors ............................................... 5 Vehicle Identification Number (VIN) ....... 270 Vehicle Stability Assist (VSA®) .................. 176
Off Button ............................................... 177 Off Indicator .............................................. 68 System Indicator ........................................ 68 Viscosity (Oil) .................................... 201, 269 VSA® (Vehicle Stability Assist) .................. 176
W
Warning Indicator On/Blinking ............... 256 Warning Labels ........................................... 62 Warranties (Warranty Manual provided
separately)............................................... 275 Watts ......................................................... 268 Wear Indicators (Tire)............................... 227 Wheel Nut Wrench (Jack Handle) ... 238, 242 Window Washers........................................ 97
Adding/Refilling Fluid............................... 211 Switch ....................................................... 97
2013 Fit
Windshield.................................................. 97 Cleaning ................................................. 236 Defrosting/Defogging.............................. 120 Washer Fluid ........................................... 211 Wiper Blades ........................................... 218 Wipers and Washers.................................. 97
Winter Tires .............................................. 230 Snow Tires .............................................. 230 Tire Chains .............................................. 230
Wipers and Washers................................... 97 Checking and Replacing Wiper Blades ........................................... 218, 220
WMA ................................................. 129, 133 Worn Tires ................................................ 222
QRG
Index
Home
285
Acrobat Distiller 9.0.0 (Windows)