Introduction
The Makita 18V LXT Lithium-Ion Compact Cordless Vacuum Kit, model XLC02R1B, is engineered for efficient and convenient cleaning. This compact and powerful vacuum offers strong suction for various cleaning tasks. Its versatile design allows it to function as a handheld unit or with an extension for floor and carpet cleaning, reaching hard-to-access areas. The kit includes an 18V compact Lithium-Ion battery and a rapid optimum charger, integrating seamlessly into Makita's extensive 18V Lithium-Ion system. Featuring Star Protection Computer Controls, the tool and battery communicate to prevent overloading, over-discharging, and overheating, ensuring enhanced performance and extended battery life.
What's Included
- 18V LXT Lithium-Ion Compact 2.0Ah Battery (BL1820B)
- 18V LXT Lithium-Ion Rapid Optimum Charger (DC18RC)
- 18V LXT Vacuum (XLC02ZB)
- Cloth Vacuum Filter (443060-3)
- Crevice Tool
- Extension Attachment (451424-7)
- Filter (451208-3)
- Floor Nozzle (198526-5)
Setup
Battery Installation and Charging
Ensure the battery is fully charged before first use. Insert the 18V LXT Lithium-Ion Compact 2.0Ah Battery (BL1820B) into the 18V LXT Lithium-Ion Rapid Optimum Charger (DC18RC). The charger will indicate charging status. Once fully charged, slide the battery into the vacuum's battery slot until it clicks securely into place.
Assembling the Vacuum
The Makita XLC02R1B can be used in two primary configurations: handheld or with the extension attachment and floor nozzle.
- Handheld Use: Attach the crevice tool directly to the vacuum's suction inlet for precise cleaning in tight spaces.
- Stick Vacuum Use: Connect the extension attachment (451424-7) to the vacuum's suction inlet. Then, attach the floor nozzle (198526-5) to the end of the extension attachment. Ensure all connections are secure.
Image: The Makita XLC02R1B cordless vacuum shown fully assembled in its stick configuration with the floor nozzle attached.
Operating
Powering On/Off
To turn the vacuum on, press the power button located on the handle. Press it again to turn the vacuum off. The vacuum operates at a single power level.
Using the Vacuum
- For Floors and Carpets: Use the vacuum in its stick configuration with the floor nozzle. Glide the nozzle over the surface to pick up debris. The redesigned floor nozzle improves maneuverability and debris collection.
- For Tight Spaces and Upholstery: Use the vacuum in handheld mode with the crevice tool. This allows for precise cleaning in corners, crevices, and on furniture.
Image: A person using the Makita XLC02R1B cordless vacuum with the extension and floor nozzle to clean stairs, demonstrating its maneuverability.
Image: A hand holding the Makita XLC02R1B cordless vacuum in handheld mode, using the crevice tool to clean a narrow gap.
Maintenance
Emptying the Dustbin
To maintain optimal suction power, regularly empty the dustbin. Twist the clear dustbin counter-clockwise to detach it from the main unit. Dispose of collected debris into a trash receptacle.
Cleaning the Filter
The Makita XLC02R1B features a 2-stage cloth filtration system. After emptying the dustbin, remove the cloth filter (443060-3) and the internal filter (451208-3). Tap them gently to dislodge dust. For thorough cleaning, the cloth filter can be washed with water and allowed to air dry completely before reinstallation. Ensure filters are dry to prevent damage and maintain performance.
Image: Two hands demonstrating the removal of the clear dustbin and the internal cloth filter from the Makita XLC02R1B cordless vacuum for cleaning.
Troubleshooting
- Reduced Suction: Check if the dustbin is full or if the filters are clogged. Empty the dustbin and clean the filters as described in the Maintenance section. Ensure all attachments are securely connected.
- Vacuum Not Turning On: Verify that the 18V LXT Lithium-Ion battery is fully charged and properly inserted into the vacuum.
- Short Battery Life: Ensure the battery is fully charged using the provided Rapid Optimum Charger. Battery runtime can vary based on usage intensity.
Specifications
| Feature | Specification |
|---|---|
| Brand | Makita |
| Model Name | Makita XLC02R1B 18V LXT Lithium-Ion Compact Cordless Vacuum Kit (2.0Ah) |
| Model Number | XLC02R1B |
| Power Source | Battery Powered (18V LXT Lithium-Ion) |
| Maximum Suction | 46 CFM |
| Runtime | Up to 15 minutes (with 2.0Ah battery) |
| Filter Type | Cloth (2-stage filtration) |
| Item Weight | 2.7 pounds (with battery) |
| Item Dimensions (L x W x H) | 18.75"L x 8.2"W x 5.8"H (approx. as hand-vac) |
| Special Feature | Bagless, Portable |
Warranty
The Makita XLC02R1B comes with a 3-year limited warranty on the tool, battery, and charger. For detailed terms and conditions, please refer to the official Makita warranty documentation or contact Makita customer support.
Support
For further assistance, technical support, or to purchase replacement parts, please visit the official Makita website or contact their customer service department. Always use genuine Makita batteries and chargers to ensure optimal performance and safety.
Safety Information
WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
