1. Introduction
This manual provides comprehensive instructions for the safe and effective use of your Ponkor Power Recliner Power Supply. This AC/DC switching power supply transformer is designed to provide reliable power to various electric recliners and lift chairs. Please read this manual thoroughly before installation and operation.
2. Safety Information
- Ensure the power supply is disconnected from the wall outlet before making any connections or disconnections.
- Do not expose the power supply to water, moisture, or extreme temperatures.
- Avoid covering the power supply during operation to prevent overheating.
- Do not attempt to open or repair the power supply. Refer to qualified personnel for service.
- Use only with compatible devices as specified in this manual.
3. Package Contents
Verify that all items are present in your package:
- 1x Power Recliner Power Supply (Adapter)
- 1x AC Power Cord
Figure 1: Contents of the package including the power adapter and AC power cord.
4. Setup Instructions
Follow these steps to connect your power recliner power supply:
- Connect the AC Power Cord to the Adapter: Insert the AC power cord into the designated port on the power supply adapter.
- Connect the Adapter to your Recliner: Locate the two-pin (flat & round) connection port on your electric recliner or lift chair. Connect the output cable from the power supply adapter to this port. Ensure a secure connection.
- Plug into a Wall Outlet: Insert the AC power cord plug into a standard wall outlet. The indicator light on the power adapter should illuminate, indicating power is supplied.
Figure 2: Detailed view of the 2-pin connector and how it securely plugs into the power supply output.
Figure 3: The power supply connected to a wall outlet and ready to power a recliner.
Video 1: A demonstration of connecting a similar power recliner supply. Note: This video features a related product from a different brand (Wutubug) but illustrates the general connection process.
5. Operating Instructions
Once the power supply is correctly connected and plugged into a live outlet, your electric recliner or lift chair should be fully operational. Use the controls on your furniture as usual to adjust positions.
6. Compatibility
This power supply is compatible with a wide range of electric recliners and lift chairs that utilize a two-pin (flat & round) connection to the motor. Compatible brands and part numbers include:
- Compatible Brands: OKIN, Limoss, Pride, Golden, Lazboy, Berkline, Med-lift, Tranquil Ease Lift Chair, Cheers Electric Sofa.
- Compatible Motors: Power Recliner DeltaDrive, BetaDrive Motors.
- Compatible Part Numbers: ZBHWX-A290020A, W52RA73-290018, HXY-270V2220A, KDDY001, KDDY008, ZB A290020-B.
Figure 4: Examples of devices compatible with this power supply, such as electric sofas, lifting tables, linear actuator motors, and pedicure chairs.
7. Features
The Ponkor Power Recliner Power Supply incorporates advanced safety features to ensure reliable and secure operation:
- Multiple Protection: Built-in intelligent chip provides protection against over-charging, over-heating, over-current, over-voltage, short-circuit, and over-discharge.
- Durable Construction: Made with fire-resistant materials and manufactured under strict production procedures for enhanced safety and longevity.
Figure 5: Overview of the power supply's specifications and integrated safety protections.
8. Specifications
| Parameter | Value |
|---|---|
| Input Voltage | AC 100-240V, 1.5-2.0A 50/60Hz |
| Output Voltage/Current | DC 29V/24V 2.0A |
| Adapter Dimensions (L*W*H) | 12.6 x 6 x 3.6 cm (approx. 4.96 x 2.36 x 1.42 inches) |
| AC Cable Cord Length | 48 inches (approx. 1.22 meters) |
| Connector Type | 2-Pin (flat & round) |
| Item Weight | 0.134 ounces |
9. Troubleshooting
If your recliner is not functioning after connecting the power supply, consider the following:
- No Power Indicator Light: Check if the AC power cord is securely plugged into both the adapter and the wall outlet. Test the wall outlet with another device to ensure it is receiving power.
- Recliner Not Responding: Ensure the 2-pin connector from the adapter is firmly seated in the recliner's input port. Verify that your recliner's motor and internal wiring are in good condition.
- Intermittent Power: Check all connections for looseness. Avoid placing heavy objects on the cables.
Video 2: A demonstration of a similar power supply in operation. Note: This video features a related product from a different brand (AIDOIT) but illustrates the functional aspect.
10. Maintenance
- Keep the power supply and cables clean and free from dust. Use a dry, soft cloth for cleaning.
- Store the power supply in a cool, dry place when not in use.
- Regularly inspect cables for any signs of damage, fraying, or exposed wires. Replace immediately if damage is found.
11. Warranty and Support
This product comes with a 48-month warranty. For any questions, technical support, or warranty claims, please contact the seller directly through your purchase platform.
