1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the Baldwin 8632 Pocket Door Privacy Mortise Body. This product is designed for privacy applications in pocket doors, offering a secure and reliable locking mechanism without requiring exterior plates.
The mortise body features a standardized heavy steel case, ensuring a smooth and precise fit within the door mortise. Its vital interior working parts are crafted from solid hot forged brass or steel, guaranteeing reliable operation. The lock cases are constructed from heavy gauge steel and treated with a protective rust-resistant coating to prevent oxidation and ensure long-lasting performance.
2. Safety Information
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in property damage or injury.
- Always wear appropriate personal protective equipment, such as safety glasses and gloves, during installation.
- Ensure the door and frame are structurally sound and properly prepared before installing the mortise body.
- Keep small parts away from children to prevent choking hazards.
- Do not modify the product in any way, as this may compromise its functionality and void the warranty.
3. Product Overview
The Baldwin 8632 Pocket Door Privacy Mortise Body is a robust and precisely engineered component for pocket door systems. It is designed to integrate seamlessly into various door thicknesses and provides a privacy function.
Figure 1: Baldwin 8632 Pocket Door Privacy Mortise Body. This image shows the compact and durable design of the mortise body, highlighting its polished chrome finish and brass construction.
Key Features:
- Privacy Function: Designed for applications where privacy is required, typically operated by a thumb turn or emergency release from the exterior (components sold separately).
- Durable Construction: Heavy steel case with hot forged brass or steel internal components.
- Corrosion Resistance: Protective rust-resistant coating on lock cases.
- Backset: Standard 2-1/2 inches.
- Material: Brass.
- Finish: Polished Chrome.
4. Setup and Installation
Proper installation is crucial for the optimal performance and longevity of your Baldwin mortise body. It is recommended that installation be performed by a qualified professional.
Required Tools (Not Included):
- Measuring Tape
- Pencil
- Drill
- Chisel
- Screwdriver Set
- Mortising Jig (recommended for precise cuts)
Installation Steps:
- Prepare the Door: Ensure the door thickness is within the supported range (1-1/2", 1-3/4", 1-3/8", 2", 2-1/2", 2-1/4"). Mark the desired height for the mortise body on the door edge.
- Mortise the Door: Using a mortising jig or careful measurements, cut the mortise pocket into the door edge according to the dimensions of the Baldwin 8632 mortise body. Ensure the depth is sufficient for the entire body to sit flush.
- Drill Spindle Holes: Drill the necessary holes for the spindle and mounting screws from the door face to the mortise pocket, aligning with the mortise body's design. The backset for this unit is 2-1/2 inches.
- Insert Mortise Body: Carefully slide the mortise body into the prepared pocket. Ensure it fits snugly and is flush with the door edge.
- Secure Mortise Body: Fasten the mortise body to the door using the provided screws. Do not overtighten.
- Install Trim and Pulls: Attach the desired pocket door trim, pulls, and privacy mechanism (e.g., thumb turn) according to their respective instructions. Ensure all components operate smoothly with the mortise body.
- Test Operation: Verify that the privacy function engages and disengages smoothly and that the door pulls operate correctly.
5. Operating Instructions
The Baldwin 8632 Pocket Door Privacy Mortise Body provides a privacy function for your pocket door. Its operation depends on the specific trim and privacy mechanism (e.g., thumb turn, emergency release) installed with it.
- Engaging Privacy: From the interior side of the door, rotate the thumb turn (if installed) to engage the privacy lock. This will prevent the door from being opened from the exterior.
- Disengaging Privacy: Rotate the thumb turn back to its original position to disengage the privacy lock.
- Emergency Release: In case of an emergency, the privacy lock can typically be disengaged from the exterior using a small tool (e.g., a paperclip or coin) inserted into the emergency release slot on the exterior trim. Refer to the instructions for your specific exterior trim for details.
6. Maintenance
Regular maintenance will help preserve the appearance and functionality of your Baldwin mortise body.
- Cleaning: Clean the exposed surfaces of the mortise body (if visible) and associated trim with a soft, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Lubrication: Periodically apply a small amount of silicone-based lubricant to the moving parts within the mortise body to ensure smooth operation. Do not use oil-based lubricants, which can attract dust and grime.
- Inspection: Periodically check all screws and fasteners to ensure they are tight. If any components appear loose or damaged, tighten or replace them as necessary.
7. Troubleshooting
If you encounter issues with your Baldwin 8632 Pocket Door Privacy Mortise Body, refer to the following common troubleshooting steps:
- Privacy Function Not Engaging/Disengaging:
- Check if the spindle or thumb turn is properly aligned and installed.
- Ensure there are no obstructions within the mortise pocket preventing the mechanism from moving freely.
- Apply lubricant to the internal mechanism.
- Door Pulls Sticking or Difficult to Operate:
- Verify that the door pulls are correctly installed and not binding against the door or frame.
- Check for any debris or foreign objects obstructing the pull mechanism.
- Loose Components:
- Tighten all visible screws on the mortise body and associated trim. Do not overtighten.
If problems persist after attempting these steps, contact Baldwin customer support or a qualified locksmith.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Baldwin |
| Model Number | 8632260 |
| Lock Type | Privacy Mortise Body |
| Backset | 2-1/2 inches |
| Door Thickness Compatibility | 1-1/2", 1-3/4", 1-3/8", 2", 2-1/2", 2-1/4" |
| Material | Brass |
| Style | Estate |
| Color | Polished Chrome |
| Finish Type | Polished |
| Item Weight | 1 Pound |
| Product Dimensions (L x W x H) | 1 x 1 x 1 inches |
| UPC | 884011755490 |
9. Warranty and Support
Baldwin products are manufactured to the highest standards of quality and performance. For specific warranty information regarding your Baldwin 8632 Pocket Door Privacy Mortise Body, please refer to the warranty documentation included with your purchase or visit the official Baldwin website.
For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Baldwin customer support:
- Website: www.baldwinhardware.com
- Customer Service: Refer to the website for contact numbers and hours of operation.
When contacting support, please have your model number (8632260) and purchase information readily available.
