Dyson Purifier Replacement Filter User Manual

Product Overview

This document provides essential instructions for the proper installation, operation, and maintenance of your Dyson Purifier Replacement Filter. This filter is designed specifically for use with Dyson Pure Cool Link Desk and Dyson Pure Hot+Cool Link purifiers, ensuring continued air purification performance.

The filter combines Activated Carbon and HEPA layers to capture ultrafine particles and absorb gases, odors, and household fumes.

Compatible Devices

• Dyson Pure Cool Link Desk Purifier
• Dyson Pure Hot+Cool Link Purifier

Ensure your purifier model is listed above for proper filter compatibility.

Installation (Setup)

Follow these steps to replace the filter in your Dyson purifier. Always unplug the device before beginning installation.

1. Power Off and Unplug: Before handling the filter, ensure your Dyson purifier is turned off and unplugged from the power outlet.
2. Remove Outer Casing: Gently twist and lift the outer casing of your purifier to expose the old filter. Refer to your specific purifier's user manual for detailed instructions on removing the casing.
3. Remove Old Filter: Carefully lift out the used filter. Dispose of the old filter according to local regulations.
4. Unpack New Filter: Remove the new replacement filter from its packaging.
5. Insert New Filter: Align the new filter with the base of the purifier and gently push it down until it clicks into place. Ensure it is seated securely.
6. Reattach Outer Casing: Place the outer casing back onto the purifier, aligning the tabs, and twist to secure it.
7. Plug In and Reset: Plug the purifier back into the power outlet. Some models may require you to reset the filter life indicator. Consult your purifier's manual for specific reset instructions, typically involving holding down a button on the remote or device.

Image 1: The Dyson Purifier Replacement Filter. This image shows the cylindrical filter with its white pleated HEPA layer and green top and bottom rings, indicating its ready-to-install form.

Image 2: Cross-section view of the Dyson Purifier Replacement Filter. This image illustrates the internal structure, revealing the outer pleated HEPA filter layer and the inner activated carbon layer, highlighting the dual filtration system.

Operation and Filter Life

Once installed and the filter life indicator is reset (if applicable), your Dyson purifier will continue to operate normally, utilizing the new filter to clean the air.

The lifespan of the filter depends on usage and air quality. Typically, Dyson recommends replacing the filter every 12 months when used 12 hours a day, or when the filter life indicator on your machine or Dyson Link app prompts you to do so.

Maintenance

The Dyson Purifier Replacement Filter is designed for maintenance-free operation. It is not washable and should not be cleaned. When the filter life indicator signals replacement, simply follow the installation steps to replace it with a new one.

Regularly check your purifier's display or the Dyson Link app for filter life status.

Troubleshooting

• Purifier still shows "Replace Filter" after installation: Ensure the new filter is correctly seated and the outer casing is securely closed. Most importantly, perform the filter reset procedure as outlined in your purifier's original user manual or the Dyson Link app.
• Reduced airflow or unusual noise: Double-check that the filter is installed correctly and not obstructed. If issues persist, refer to your purifier's main user manual or contact Dyson support.
• Filter doesn't fit: Verify that you have purchased the correct replacement filter for your specific Dyson Pure Cool Link Desk or Pure Hot+Cool Link model. Refer to the "Compatible Devices" section.

Specifications

Warranty and Support

This replacement filter is a consumable part. For warranty information regarding the filter itself or your Dyson purifier, please refer to the original warranty documentation provided with your Dyson purifier or visit the official Dyson website.

For further assistance or technical support, please contact Dyson Customer Service. Contact details can typically be found on the Dyson official website or in your purifier's original user manual.

Note: Use of non-genuine Dyson filters may void your purifier's warranty.