Introduction
This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your Fastrack Analog Black Dial Men's Watch, model NN3130NM01. Please read this manual carefully to ensure proper use and longevity of your timepiece.
For additional support or information, please visit the official Fastrack Store on Amazon.
Product Overview

Image 1: Front view of the Fastrack Analog Black Dial Men's Watch. This image displays the watch face with its black dial, silver-tone hour markers, and orange hands, encased in a silver-tone stainless steel case with a matching bracelet.

Image 2: Back view of the Fastrack Analog Black Dial Men's Watch. The stainless steel case back is visible, engraved with the Fastrack logo and other product information, along with the open clasp of the stainless steel bracelet.

Image 3: Side view of the Fastrack Analog Black Dial Men's Watch. This image highlights the watch's profile, showing the thickness of the case and the crown used for setting the time, along with a portion of the stainless steel bracelet.
Setup
1. Setting the Time
- Pull out the crown: Gently pull the crown (the small knob on the side of the watch case) outwards to the first position.
- Adjust the time: Rotate the crown clockwise or counter-clockwise to move the hour and minute hands to the desired time.
- Push in the crown: Once the correct time is set, push the crown back into its original position against the watch case. This will start the watch movement.
2. Adjusting the Bracelet
The stainless steel bracelet may require adjustment to fit your wrist comfortably. This typically involves removing or adding links. It is recommended to have this procedure performed by a professional watchmaker or jeweler to avoid damage to the bracelet or watch.

Image 4: The Fastrack Analog Black Dial Men's Watch displayed on a wrist. This image illustrates how the watch appears when worn, emphasizing its size and fit.
Operating the Watch
Your Fastrack Analog Watch is a quartz movement timepiece designed for accurate timekeeping. Once the time is set, the watch will operate continuously until the battery requires replacement.
- Time Display: The watch displays time using three hands: an hour hand, a minute hand, and a second hand.
- Quartz Movement: The watch is powered by a quartz crystal oscillator, ensuring precise time measurement.
Maintenance
1. Cleaning
- Wipe the watch case and bracelet regularly with a soft, dry cloth to remove dust and dirt.
- For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive materials.
2. Water Resistance
While the watch may offer some level of water resistance, it is generally recommended to avoid prolonged exposure to water, such as swimming or showering, unless explicitly stated otherwise on the watch or in its specifications. Always ensure the crown is fully pushed in to maintain any stated water resistance.
3. Battery Replacement
The watch is powered by a quartz battery. When the watch stops or the second hand begins to skip, it indicates that the battery needs replacement. It is highly recommended to have the battery replaced by an authorized service center or a qualified watch technician to ensure proper sealing and maintain water resistance.
4. Storage
When not in use, store your watch in a cool, dry place, away from direct sunlight and extreme temperatures. The original packaging can serve as a suitable storage container.

Image 5: The Fastrack watch packaging, designed as a black can with the Fastrack logo. This packaging can be used for safe storage of the watch when not in use.
Troubleshooting
- Watch not running:
- Ensure the crown is fully pushed in.
- The battery may need replacement. Consult a professional.
- Time is inaccurate:
- Check if the time was set correctly.
- Exposure to strong magnetic fields can affect quartz watches.
- A low battery can also cause erratic timekeeping.
- Condensation under the crystal:
- This indicates moisture has entered the watch. Seek immediate professional service to prevent damage to the movement.
Specifications
| Feature | Detail |
|---|---|
| Brand | Fastrack |
| Model Number | NN3130NM01 |
| Dial Color | Black |
| Case Shape | Round |
| Band Color | Black |
| Band Material | Stainless Steel |
| Watch Movement Type | Quartz |
| Watch Display Type | Analog |
| Case Diameter | 47 Millimetres |
| Case Thickness | 11.8 Millimetres |
| Item Weight | 204 g |
| Manufacturer | Titan Company Ltd |
| Date First Available | 17 May 2017 |
Warranty and Support
Warranty Information
This Fastrack watch comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration of the warranty. Keep your purchase receipt as proof of purchase for warranty claims.
Customer Support
For any service, repair, or warranty-related inquiries, please contact Fastrack customer service or visit an authorized Fastrack service center. You can find contact details and service center locations on the official Fastrack website or through the Fastrack Store on Amazon.