1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Duravit Vero Air Wall-Mount Sink, Model 235060. Please read these instructions carefully before beginning installation or use to ensure safe and correct functionality.

Figure 1.1: The Duravit Vero Air Wall-Mount Sink, Model 235060, shown with a standard faucet and drain. This ceramic sink features a rectangular design suitable for modern bathrooms.
2. Setup and Installation
2.1 Pre-Installation Checklist
- Verify all components are present and undamaged.
- Ensure the wall structure is adequate to support the weight of the sink and any accessories.
- Confirm water supply lines and drain connections are correctly positioned according to local plumbing codes.
- Gather necessary tools: measuring tape, level, drill, appropriate fasteners for wall type, sealant, wrenches.
2.2 Wall-Mount Installation Steps
- Marking: Using the provided template or the sink itself, mark the desired height and mounting points on the wall. Ensure the marks are level.
- Drilling: Drill pilot holes at the marked locations. Use drill bits appropriate for your wall material (e.g., tile, drywall, concrete).
- Securing Brackets/Bolts: Install the wall mounting brackets or hanger bolts securely into the wall. Ensure they are firmly anchored.
- Faucet and Drain Assembly: Install the faucet and drain assembly onto the sink according to their respective manufacturer's instructions before mounting the sink to the wall.
- Mounting the Sink: Carefully lift the sink and align it with the installed wall brackets or hanger bolts. Secure the sink in place using the provided hardware. Do not overtighten.
- Connecting Plumbing: Connect the hot and cold water supply lines to the faucet. Connect the drain trap to the sink's drain outlet and to the wall drain pipe.
- Sealing: Apply a bead of silicone sealant along the back edge of the sink where it meets the wall to prevent water infiltration.
- Testing: Turn on the water supply and check for any leaks at all connections.

Figure 2.1: Technical drawing illustrating the dimensions and mounting points for the Duravit Vero Air Wall-Mount Sink. Refer to these measurements for accurate installation.

Figure 2.2: The Duravit Vero Air Sink shown with optional console legs, providing an alternative installation method for additional support or aesthetic preference.
3. Operating Instructions
The Duravit Vero Air Wall-Mount Sink operates like any standard bathroom sink.
- Water Flow: Use the faucet handles to control the flow and temperature of water.
- Drain Operation: The sink is designed for a pop-up drain. Push down on the drain stopper to close it and retain water in the basin. Push again to open and allow water to drain.
4. Maintenance and Care
4.1 Cleaning the Ceramic Surface
To maintain the pristine appearance of your Duravit Vero Air sink, follow these cleaning guidelines:
- Daily Cleaning: Wipe the sink surface with a soft, damp cloth and a mild, non-abrasive cleaner. Rinse thoroughly with water and dry with a soft cloth to prevent water spots.
- Stubborn Stains: For more stubborn stains, use a ceramic-safe cleaner. Always test the cleaner on an inconspicuous area first.
- Avoid: Do not use abrasive cleaners, scouring pads, strong acids, or alkaline solutions, as these can damage the ceramic finish. Avoid leaving harsh chemicals on the surface for extended periods.
4.2 Drain Maintenance
Regularly check the pop-up drain for hair or debris accumulation. Clear any blockages to ensure proper drainage.

Figure 4.1: A close-up view highlighting the smooth, durable ceramic finish of the Duravit Vero Air Sink, emphasizing the importance of proper care.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water Leakage | Loose plumbing connections, faulty sealant. | Check and tighten all water supply and drain connections. Reapply sealant if necessary. |
| Slow Drainage | Drain partially clogged with hair or debris. | Remove the pop-up stopper and clear any obstructions from the drain. |
| Sink Not Level | Improper installation of wall mounts. | Adjust wall mounting hardware. Ensure the sink is level before fully tightening. |
6. Specifications
- Brand: Duravit
- Model: 235060
- Color: White
- Material: Ceramic
- Size: Medium
- Product Dimensions: 6.5"D x 23.63"W x 6.5"H
- Installation Type: Wall-Mount
- Shape: Rectangular
- Drain Type: Pop-Up
- Item Weight: 40 Pounds
- Hole Count: 1 (for faucet)
7. Warranty Information
Duravit products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to your Vero Air Wall-Mount Sink, please refer to the warranty documentation included with your purchase or visit the official Duravit website.
8. Customer Support
Should you require assistance with installation, operation, or troubleshooting beyond the scope of this manual, please contact Duravit customer support. Contact information can typically be found on the Duravit website or on your purchase receipt.





