RIDGID 55898
Contents
RIDGID micro CA-350 Handheld Inspection Camera User Manual
Model: 55898
Introduction
This manual provides instructions for the safe and effective operation of the RIDGID micro CA-350 Handheld Inspection Camera. This device is designed for visual inspections in hard-to-reach areas, allowing for the recording of still images and videos. Please read this manual thoroughly before use.

Figure 1: RIDGID micro CA-350 Handheld Inspection Camera. This image shows the main unit with its display screen and the attached flexible camera cable.
Safety Information
Always observe the following safety precautions to reduce the risk of injury or damage to the product:
- Read all instructions before operating the device.
- Do not expose the camera head or cable to live electrical circuits.
- Ensure the battery is charged using only the provided charger.
- Keep the device away from water and moisture unless the camera head is specifically rated for immersion.
- Do not attempt to disassemble or modify the unit.
Included Components
The RIDGID micro CA-350 package includes the following items:
- micro CA-350 Inspection Camera with 17mm Imager (55898)
- Rechargeable 12V Li-Ion Battery
- Battery Charger with Cord
- USB Cable, 3 ft. (90 cm)
- Set of Hook, Magnet and Mirror Accessories
- RCA Cable with Audio, 3 ft. (90 cm)
- AC Adapter
- Headset with Microphone
- 8GB SD Card
- User Manual

Figure 2: The base of the RIDGID micro CA-350 showing the 12V rechargeable Lithium-ion battery inserted into the handle.
Setup
1. Charging the Battery
- Insert the 12V Li-Ion battery into the battery compartment at the base of the unit.
- Connect the battery charger to the AC adapter.
- Plug the AC adapter into a standard electrical outlet.
- Connect the charger to the battery port on the inspection camera. The charging indicator light will illuminate.
- Allow the battery to fully charge before first use.
2. Inserting the SD Card
- Locate the SD card slot on the side of the unit.
- Insert the provided 8GB SD card with the metal contacts facing down until it clicks into place.
3. Attaching Accessories
- The hook, magnet, and mirror accessories can be screwed onto the 17mm imager head for specific applications.
- Ensure accessories are securely fastened to prevent detachment during use.
Operating Instructions
1. Powering On/Off
- To power on, press and hold the power button until the display illuminates.
- To power off, press and hold the power button until the unit shuts down.
2. Basic Operation
- Live View: Once powered on, the display will show the live feed from the camera imager.
- Adjusting Brightness: Use the dedicated buttons to adjust the LED light intensity on the camera head.
- Image Rotation: The unit features image rotation for optimal viewing regardless of camera orientation. Refer to the on-screen icons for controls.
- Digital Zoom: Utilize the zoom function to magnify areas of interest on the display.
3. Recording Images and Videos
- Capture Still Image: Press the photo button to capture a still image. The image will be saved to the SD card.
- Record Video: Press the video record button to start recording. Press it again to stop recording. Videos are saved to the SD card.
4. Connecting to External Display
- Use the provided RCA cable to connect the micro CA-350 to a television or monitor for remote viewing or recording.
5. Using with See Snake Reels
- The micro CA-350 is compatible with micro Reel, micro Drain, and Nano Reel Inspection Systems (sold separately).
- Connect the appropriate See Snake reel to the unit as per the reel's instructions. The CA-350 will function as the display and recording unit.
Maintenance
- Cleaning: Wipe the unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Camera Head: Gently clean the camera lens with a soft, lint-free cloth.
- Battery Care: Store the battery in a cool, dry place. Recharge regularly, even if not in use, to maintain battery health.
- Storage: Store the inspection camera and its accessories in the durable blow-molded case when not in use to protect it from damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | Battery is discharged or not properly inserted. | Ensure battery is fully charged and correctly seated. |
| No image on display. | Camera cable is disconnected or damaged. | Check cable connection. If damaged, contact support. |
| Cannot record images/videos. | SD card is full, missing, or corrupted. | Insert a new SD card, check existing card for space, or format the card (data will be lost). |
| Poor image quality. | Camera lens is dirty or lighting is insufficient. | Clean the camera lens. Adjust the LED brightness. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 55898 |
| Imager Head Diameter | 17mm |
| Display Size | 3 1/2" Color Display |
| Battery Type | 12V Rechargeable Lithium-ion |
| Video Capture Resolution | 480p |
| Media Type | JPG (for images) |
| Item Weight | 1.98 pounds |
| Product Dimensions | 10 x 5 x 4 inches |
| Special Features | Low Light capability |
Warranty Information
The RIDGID micro CA-350 Inspection Camera is covered by a RIDGID Lifetime Warranty against defects in material or workmanship. For full details and terms of the warranty, please refer to the official RIDGID warranty documentation or visit the RIDGID website.
Customer Support
If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact RIDGID customer support. Visit the official RIDGID website for contact information and service centers.
You can also visit the RIDGID Store on Amazon for additional product information and resources.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.