1. Setup
Follow these steps to set up your Makartt Mini UV LED Nail Lamp:
- Unfold the Legs: Gently pull out the two foldable legs located on the underside of the lamp to create a stable base.
- Connect to Power: Use the provided USB cable to connect the lamp to a power source. This can be a USB wall adapter (not included), a power bank, or a laptop USB port. The lamp requires a power connection for operation as it is not rechargeable.
Image: The Makartt Mini UV LED Nail Lamp connected to a power bank via its USB cable.
Image: A visual guide illustrating the correct way to connect the USB power supply to the lamp and a reminder that a power connection is required for operation.
2. Operating Instructions
The Makartt Mini UV LED Nail Lamp is designed for simple, one-touch operation.
- Power On: Once connected to a power source, gently press the top surface of the lamp. The UV/LED lights will illuminate.
- Curing Nails: Place your fingers (up to four at a time) or thumb under the lamp. The lamp has a built-in 60-second timer. It will automatically turn off after 60 seconds.
- Repeat as Needed: For complete curing of all nails, repeat the process for your thumb and any remaining fingers.
- Power Off: The lamp will automatically turn off after the 60-second cycle. To manually turn it off before the cycle completes, gently press the top surface again.
Image: A hand activating the one-touch curing function of the Makartt Mini UV LED Nail Lamp, which features a 60-second timer.
Image: A four-step visual guide demonstrating how to connect the lamp, place fingers for curing, cure the thumb separately, and enjoy the manicure.
Curing Times
- Base Coat / Top Coat: 60 seconds
- Gel Nail Polish: 60 seconds
- Builder Nail Gel: 60 seconds
- Nail Extension Gel: 120 seconds
Note: It is normal for the base coat and color gel polish to be slightly sticky after curing. This is known as the inhibition layer and can be wiped off with alcohol after the final top coat is cured.
3. Maintenance
- Cleaning: To clean the lamp, use a soft, dry cloth. Do not use acidic liquids or harsh chemicals, as this may damage the chips or cause discoloration.
- Storage: When not in use, fold the legs back into the lamp for compact storage. Store in a cool, dry place away from direct sunlight.
4. Troubleshooting
- Lamp Not Turning On: Ensure the USB cable is securely connected to both the lamp and a functioning power source. Remember, the lamp requires a constant power connection to operate.
- Gel Not Curing: Ensure you are using UV/LED compatible gel polishes. Apply thin coats of polish. If the gel remains sticky after curing, this is normal (inhibition layer) and can be wiped off after the final top coat. If discomfort occurs during use, discontinue immediately.
- Intermittent Operation: Check the USB cable for any damage or loose connections. Try a different USB port or power adapter.
5. Specifications
| Feature | Detail |
|---|---|
| Model Number | E0846 |
| Power | 6 Watts |
| Light Source Type | UV LED (Dual Light Source) |
| Wavelength | 365nm + 405nm |
| Number of Light Sources | 6 LED Beads |
| Timer | 60 seconds (Built-in) |
| Power Source | Corded Electric (USB Connectivity) |
| Product Dimensions | 1.89"D x 4.49"W x 2.28"H |
| Item Weight | 0.12 Pounds |
| Material Type | Dual Source LED+UV Lamp Beads, High Quality Plastic |
| Color | Pink |
6. Warranty & Support
Makartt is committed to ensuring the quality of every product. For any issues or concerns regarding your Makartt 6W Mini USB Portable UV LED Nail Lamp, please contact our customer support team.
You can reach us through the Amazon platform where you purchased the product. Please refer to your purchase details for specific warranty information and return policies.
7. Product Videos
Makartt Mini UV Nail Curing Light
Video: An official demonstration of the Makartt Mini UV Nail Curing Light, showcasing its features and ease of use for gel nail curing.