Feit Electric LED Three-Color Choice Intellibulb A19 E26 Light Bulb Instruction Manual

1. Introduction

The Feit Electric LED Three-Color Choice Intellibulb offers advanced lighting functionality without the need for complex hubs, applications, or Wi-Fi connectivity. This A19 LED bulb with an E26 medium base provides three distinct color temperatures, allowing you to customize the ambiance of any room. Users can pre-select a desired color temperature directly on the bulb or utilize a standard wall switch to cycle through the options.

This energy-efficient bulb is designed to replace traditional 60W incandescent bulbs while consuming only 9.5W, offering significant energy savings. With a lifespan of up to 15,000 hours, it provides long-lasting, reliable illumination.

A close-up view of the Feit Electric A19 LED Intellibulb, showcasing its standard A19 shape and E26 screw base. The bulb features a small switch on its side for color temperature selection.

2. Safety Information

• Risk of Electric Shock: Always turn off the power to the fixture and allow the bulb to cool before replacing.
• Risk of Burns: Do not touch the bulb when it is operating or immediately after turning it off.
• Not for use with emergency exits.
• Suitable for damp locations.
• Do not use with dimmers unless specified as dimmable. This specific model is dimmable.
• Ensure the bulb is securely screwed into a compatible E26 medium base socket.

3. Package Contents

Each package contains:

• 1 x Feit Electric LED Three-Color Choice Intellibulb (Model: A800/CCT/LEDI)

The retail packaging for the Feit Electric Color Choice Intellibulb, illustrating its key features and specifications.

4. Setup

1. Power Off: Before installation, ensure the power to the light fixture is turned off at the switch or circuit breaker.
2. Install Bulb: Carefully screw the Feit Electric LED Intellibulb into a standard E26 medium base socket until snug. Do not overtighten.
3. Select Color Temperature (Optional Pre-setting): Locate the small switch on the side of the bulb. This switch allows you to pre-select a desired color temperature:
   • SW: Soft White (2700K)
   • CW: Cool White (4000K)
   • DL: Daylight (5000K)
   • Switch: This setting enables cycling through color temperatures using your existing wall switch.
   Move the switch to your preferred setting. If you want to use your wall switch to change colors, set it to 'Switch'.
4. Restore Power: Turn the power back on at the switch or circuit breaker.

A detailed view of the Feit Electric Intellibulb, highlighting the physical switch located on the bulb's body for pre-selecting color temperatures or enabling wall switch control.

5. Operating Instructions

Once installed, the bulb will illuminate at the color temperature selected on its physical switch. If the switch on the bulb is set to 'Switch' mode, you can change the color temperature using your standard wall light switch.

Changing Color Temperature with a Wall Switch (if 'Switch' mode is selected):

1. Turn the light switch ON. The bulb will illuminate in the default color temperature (usually Soft White).
2. To change the color, turn the light switch OFF and then immediately ON again. The bulb will cycle to the next color temperature.
3. Repeat the OFF/ON sequence to cycle through Soft White (2700K), Cool White (4000K), and Daylight (5000K).
4. If the bulb remains off for more than 5 seconds, it will reset to the default color temperature (Soft White) when turned on again.

An image showing a person interacting with a standard wall light switch, demonstrating how the Feit Electric Intellibulb can be controlled to cycle through its color temperatures when set to 'Switch' mode.

Color Temperature Descriptions:

• Soft White (2700K): A warm, inviting light that closely resembles traditional incandescent bulbs. Ideal for living rooms, bedrooms, and dining areas where a cozy atmosphere is desired.
• Cool White (4000K): A bright, clean light that is easy on the eyes. Suitable for kitchens, offices, and workspaces where a more focused and productive environment is beneficial.

An example of a room illuminated with Cool White (4000K) light, providing a bright and clean ambiance suitable for tasks requiring focus.

• Daylight (5000K): A crisp, energizing white light that simulates full-spectrum natural daylight. Best for areas requiring maximum visibility, such as garages, basements, or utility rooms.

An example of a room illuminated with Daylight (5000K) light, simulating natural full-spectrum light. This crisp white light is energizing and ideal for areas where maximum brightness is desired.

6. Maintenance

• Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Replacement: This LED bulb has a long lifespan. When replacement is eventually needed, follow the same safety and installation steps as outlined in the Setup section.

7. Troubleshooting

• Bulb does not light:
  • Ensure the power to the fixture is on.
  • Check that the bulb is securely screwed into the socket.
  • Verify that the circuit breaker is not tripped.
  • Test the bulb in another working fixture to confirm it is not faulty.
• Color selection is not working with wall switch:
  • Ensure the physical switch on the bulb itself is set to the 'Switch' position.
  • Perform the OFF/ON sequence quickly to cycle through colors. A delay of more than 5 seconds will reset the bulb to Soft White.
• Bulb flickers or dims unexpectedly:
  • Ensure the bulb is compatible with any dimmer switches in use. This bulb is dimmable.
  • Check for loose connections in the fixture or wiring.
  • Voltage fluctuations in your electrical system can sometimes cause flickering.

8. Specifications

9. Warranty Information

This Feit Electric LED Intellibulb is covered by a 1-year manufacturer warranty from the date of purchase. For warranty claims or further details, please retain your proof of purchase and contact Feit Electric customer support.

10. Support

For additional assistance, technical support, or to inquire about other Feit Electric products, please visit the official Feit Electric website or contact their customer service department. Contact information can typically be found on the product packaging or the official brand website.

Feit Electric Website: www.feit.com